Revision notes

Simple Machines: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Levers and the principle of moments

Classes of lever
ClassArrangementExampleMA
FirstFulcrum between effort and loadCrowbar, see-saw, scissors, pliersGreater than, equal to or less than 1
SecondLoad between fulcrum and effortWheelbarrow, nutcracker, bottle openerAlways greater than 1
ThirdEffort between fulcrum and loadForearm, tongs, fishing rodAlways less than 1

Effort × effort arm = load × load arm. MA = load/effort = effort arm/load arm. A machine can multiply force or change its direction, but cannot give out more work than it takes in.

— Remember
  • Balance of moments: clockwise moments equal anticlockwise moments.
  • Second-class levers always have MA > 1; third-class always have MA < 1.
  • The longer the effort arm, the smaller the effort needed.
Read the full lesson

Lesson 2

Mechanical advantage, velocity ratio and efficiency

η = (MA/VR) × 100% = (output work / input work) × 100%. Efficiency is always less than 100% for a real machine. MA = VR for an ideal machine.

— Remember
  • MA counts forces; VR counts distances.
  • Efficiency = MA/VR; friction makes MA smaller than VR.
  • No machine can create energy.
Read the full lesson

Lesson 3

Inclined plane, wedge and screw

Ramp: VR = l/h, ideal effort = W × h/l. Screw jack: VR = 2πr/p. Longer ramp or finer pitch means a larger MA but more distance travelled by the effort.

— Remember
  • VR of a ramp is length divided by height.
  • Friction raises the effort and lowers efficiency.
  • Screws and wedges are inclined planes in disguise.
Read the full lesson

Lesson 4

Pulleys and wheel and axle

Block and tackle: ideal MA = VR = number of supporting strands. Wheel and axle: ideal MA = R/r. Fixed pulley changes only the direction of the force.

— Remember
  • Count the strands that support the load to find the VR.
  • The effort moves farther than the load by the same factor.
  • A fixed pulley gives no force gain, only a convenient direction.
Read the full lesson

Lesson 5

Gears, combined machines and everyday applications

Gears: N₁T₁ = N₂T₂. Chained machines: VR multiplies and efficiency multiplies. No machine increases the work done.

— Remember
  • Gears trade speed for torque.
  • In a chain of machines multiply the ratios and the efficiencies.
  • Classify levers by the order of fulcrum, load and effort.
Read the full lesson

Lesson 6

Lever problem set: supports, carried loads and the unequal-arm balance

Take moments about the point where an unknown force acts. Upward forces = downward forces. Faulty balance: m = √(m₁ m₂).

— Rule to remember
  • Choose the pivot where an unknown force acts.
  • Check your answer by testing that forces also balance.
  • The geometric mean gives the true mass on an unequal-arm balance.
Read the full lesson

Lesson 7

Efficiency problems: finding the missing quantity, power and the effect of load

η = L ÷ (E × VR). Output power = load × speed. Input power = output power ÷ η.

— Rule to remember
  • One equation covers L, E, VR and η.
  • Power and time link to the same efficiency.
  • Efficiency of a real machine rises with load.
Read the full lesson

Lesson 8

Inclined plane and pulley problems with friction and weight of the pulley

Ramp: ideal effort = W sinθ = W h ÷ l. Actual effort = W sinθ + friction. Efficiency = ideal ÷ actual.

— Rule to remember
  • Find the ideal first, then add friction.
  • Efficiency equals ideal effort divided by actual effort.
  • Combine machines by multiplying the ratios.
Read the full lesson

Lesson 9

Gears, belts, bicycles and the windlass: speed and effort problems

Meshing gears: N₁T₁ = N₂T₂, opposite directions. Same shaft: same speed. Belt: N₁D₁ = N₂D₂.

— Rule to remember
  • Follow the drive step by step, one pair at a time.
  • Bigger driven gear means slower speed and more torque.
  • The power does not increase through the gears.
Read the full lesson

Privacy · Terms · Refunds · Delivery