• Practice
  • About 15 min
  • 5 practice questions

Inclined plane, wedge and screw

Calculate the mechanical advantage of an inclined plane and a screw jack, with and without friction.

If something looks wrong, please tell us.

Pushing a barrel up a ramp is easier than lifting it straight up, although the work done against gravity is the same. The ramp spreads the effort over a longer distance. The wedge and screw are related machines.

Inclined plane

For a ramp of length l and height h, the velocity ratio is VR = l/h. For an ideal (frictionless) ramp, the effort along the slope is E = W h/l = W sin θ, so MA = l/h. With friction the actual effort is greater, MA is smaller and efficiency η = MA/VR.

Wedge and screw

A wedge is two inclined planes back to back; the thinner the wedge, the greater the MA (axe, knife, chisel). A screw is an inclined plane wound around a cylinder. The pitch p is the distance the screw advances in one turn. In a screw jack with a handle of length r, VR = 2πr/p.

Worked examples

Example 1. A ramp is 5 m long and 1 m high. VR = 5. The ideal effort to raise a 500 N load is 500/5 = 100 N.

Example 2. On the same ramp, friction makes the actual effort 125 N. MA = 500/125 = 4. Efficiency = 4/5 × 100 = 80%.

Example 3. A screw jack has a handle of radius 50 cm and a pitch of 5 mm. VR = 2π × 500/5 = 628 (approximately). With an efficiency of 25%, MA = 0.25 × 628 ≈ 157, so an effort of 10 N can lift about 1570 N.

Example 4. A load of 200 N is raised through 2 m using a ramp of length 8 m. The ideal effort = 200 × 2/8 = 50 N. Work done = 50 × 8 = 400 J = 200 × 2 = 400 J, the same as lifting directly.

Ramp: VR = l/h, ideal effort = W × h/l. Screw jack: VR = 2πr/p. Longer ramp or finer pitch means a larger MA but more distance travelled by the effort.

— Remember

Key takeaways

  • VR of a ramp is length divided by height.
  • Friction raises the effort and lowers efficiency.
  • Screws and wedges are inclined planes in disguise.

Check your understanding

  1. 1. A smooth ramp is 4 m long and 1 m high. What effort raises a 200 N load along it?

    1. 800 N
    2. 50 N
    3. 200 N
    4. 100 N
    Show answer

    Answer: B. Ideal effort = W × h ÷ l = 200 × 1 ÷ 4 = 50 N.

  2. 2. A 500 N load is pushed up a ramp 5 m long and 1 m high. Friction makes the actual effort 125 N. What is the efficiency?

    1. 25%
    2. 125%
    3. 100%
    4. 80%
    Show answer

    Answer: D. VR = 5 ÷ 1 = 5. MA = 500 ÷ 125 = 4. Efficiency = 4 ÷ 5 × 100% = 80%.

  3. 3. A screw jack has a handle of radius 50 cm and a pitch of 5 mm. What is its velocity ratio?

    1. About 62.8
    2. About 6280
    3. About 0.628
    4. About 628
    Show answer

    Answer: D. Use the same unit: r = 500 mm. VR = 2πr ÷ p = 2π × 500 ÷ 5 ≈ 628.

  4. 4. Why does a thin wedge split wood more easily than a thick one?

    1. A thinner wedge has a smaller velocity ratio
    2. A thinner wedge has a larger mechanical advantage
    3. A thinner wedge has less friction, so its efficiency is over 100%
    4. A thick wedge is a lever, not an inclined plane
    Show answer

    Answer: B. A wedge is two inclined planes back to back; the thinner it is (the smaller its angle), the greater its MA, so less effort splits the wood.

  5. 5. A 200 N load is raised 2 m using a smooth ramp 8 m long. How much work does the effort do?

    1. 1600 J
    2. 100 J
    3. 400 J
    4. 3200 J
    Show answer

    Answer: C. Ideal effort = 200 × 2 ÷ 8 = 50 N. Work = 50 × 8 = 400 J, the same as lifting directly: 200 × 2 = 400 J.

Sign in to keep track of the lessons you finish.

Next lesson → Pulleys and wheel and axle

Privacy · Terms · Refunds · Delivery