• Practice
  • About 15 min
  • 5 practice questions

Lever problem set: supports, carried loads and the unequal-arm balance

Solve beam and lever problems by choosing a clever pivot, find the support forces on a plank, share a carried load, and correct a faulty balance.

If something looks wrong, please tell us.

Lever questions in exams are rarely just 'find the effort'. They ask for forces at supports, the share of a load carried by two people, or the true weight on a faulty balance. The method is the same each time: take moments, and choose the pivot so that the force you do not need disappears from the equation. Take g = 10 m/s².

Speed method: choose the pivot wisely

A force that passes through the pivot has zero moment. So if two unknown forces act on a beam, take moments about the point where one of them acts. That unknown drops out, and the other is found in one line. Then use 'upward forces = downward forces' to find the second.

Worked examples

Example 1: forces at two supports. A uniform plank of weight 200 N and length 4 m rests on supports at its two ends. A load of 100 N is placed 1 m from the left end. Take moments about the left end: R_B × 4 = 200 × 2 + 100 × 1 = 500, so R_B = 125 N. Total upward force = total downward force = 300 N, so R_A = 300 − 125 = 175 N. The support nearer the load carries more.

Example 2: two people carrying a load. Two workers carry a 600 N load hung from a light pole 3 m long. The load is 1 m from the front worker. Take moments about the rear worker: F_front × 3 = 600 × 2, so F_front = 400 N, and the rear worker carries 600 − 400 = 200 N. The worker closer to the load carries more of it.

Example 3: crowbar design. A crowbar must lift a load of 1200 N with an effort of 200 N. The load acts 0.15 m from the fulcrum. Effort arm = 1200 × 0.15 ÷ 200 = 0.9 m. MA = 1200 ÷ 200 = 6, which equals 0.9 ÷ 0.15.

Example 4: the faulty balance. A beam balance has unequal arms l₁ and l₂. An object of true mass m balances 400 g on one pan, and when placed on the other pan it balances 441 g. First case: m l₁ = 400 l₂. Second case: m l₂ = 441 l₁. Multiply the equations: m² l₁ l₂ = 400 × 441 l₁ l₂, so m² = 400 × 441 = 176 400 and m = 420 g. The true mass is the geometric mean of the two readings, not their average.

Example 5: finding the position of the load. A uniform bar of weight 60 N and length 2 m is pivoted 0.5 m from one end. A load of 90 N hangs from the short end. The bar's weight acts at its centre, 0.5 m from the pivot on the long side. Moment of the load = 90 × 0.5 = 45 N m anticlockwise. Moment of the bar's own weight = 60 × 0.5 = 30 N m clockwise. An extra downward force F on the long end, 1.5 m from the pivot, must provide the remaining 15 N m: F × 1.5 = 15, so F = 10 N.

Take moments about the point where an unknown force acts. Upward forces = downward forces. Faulty balance: m = √(m₁ m₂).

— Rule to remember

Traps

  • Putting a uniform rod's weight at the end instead of at the centre.
  • Measuring the distance along a slanting rod rather than perpendicular to the force.
  • Averaging the two readings of a faulty balance instead of using the geometric mean.

Key takeaways

  • Choose the pivot where an unknown force acts.
  • Check your answer by testing that forces also balance.
  • The geometric mean gives the true mass on an unequal-arm balance.

Check your understanding

  1. 1. A light pole 4 m long carries a 400 N load 1 m from the front person. The front person's share is:

    1. 300 N
    2. 100 N
    3. 200 N
    4. 400 N
    Show answer

    Answer: A. Moments about the rear person: F × 4 = 400 × 3, so F = 300 N. The rear person carries 100 N.

  2. 2. A uniform beam of weight 100 N rests on supports at its two ends. A 50 N load is at the centre. Each support carries:

    1. 50 N
    2. 100 N
    3. 75 N
    4. 150 N
    Show answer

    Answer: C. Total downward force = 150 N, shared equally by symmetry: 75 N each.

  3. 3. An object on a faulty balance weighs 100 g on one pan and 121 g on the other. Its true mass is:

    1. 110.5 g
    2. 110 g
    3. 120 g
    4. 100 g
    Show answer

    Answer: B. True mass = √(100 × 121) = √12 100 = 110 g, which is the geometric mean, not the average 110.5 g.

  4. 4. A lever has a load arm of 0.2 m, and a load of 500 N is lifted by an effort of 100 N. The effort arm is:

    1. 0.04 m
    2. 2.5 m
    3. 1 m
    4. 0.4 m
    Show answer

    Answer: C. E × effort arm = L × load arm gives 100 × a = 500 × 0.2, so a = 1 m.

  5. 5. To avoid having to calculate an unknown support force, you should take moments about:

    1. The beam's centre
    2. The load's position
    3. Any point at random
    4. Where the unknown acts
    Show answer

    Answer: D. A force acting at the pivot has zero moment, so it drops out of the equation.

Privacy · Terms · Refunds · Delivery