• Practice
  • About 14 min
  • 5 practice questions

Gears, combined machines and everyday applications

Use gear ratios, combine machines, and identify the lever class and machine type in everyday tools.

If something looks wrong, please tell us.

Real tools combine simple machines: a bicycle uses levers, wheels and gears together. Competitive exams ask you to identify the machine and work out a ratio, so this lesson ties the course together.

Gears

Two meshed gears have rotation speeds inversely proportional to their numbers of teeth: N₁T₁ = N₂T₂. A small driver gear turning a large driven gear lowers the speed but raises the torque; the reverse raises speed but reduces torque. Meshed gears turn in opposite directions.

Combining machines

  • When machines are arranged in a chain, the overall velocity ratio is the product of individual VRs.
  • The overall efficiency is the product of the individual efficiencies.
  • A bicycle's pedal-and-chainring system combined with the wheel is an example: a larger force at the pedal is traded for greater speed at the road (the mechanical advantage is less than 1).

Worked examples

Example 1. A driver gear with 20 teeth turns at 120 rpm and drives a gear with 40 teeth. N₂ = 120 × 20/40 = 60 rpm; the driven gear turns at half the speed with twice the torque.

Example 2. Two machines with VR = 3 and VR = 4 are used in a chain. Overall VR = 12. If their efficiencies are 80% and 90%, the overall efficiency is 72% and the overall MA = 0.72 × 12 = 8.64.

Example 3. A fishing rod is a third-class lever: the effort (your hand) lies between the fulcrum (the end of the rod) and the load (the fish). MA < 1, but the tip moves quickly through a large distance.

Example 4. A pair of tongs is third class, a claw hammer is first class, a bottle opener is second class, and a wheelbarrow is second class.

Gears: N₁T₁ = N₂T₂. Chained machines: VR multiplies and efficiency multiplies. No machine increases the work done.

— Remember

Key takeaways

  • Gears trade speed for torque.
  • In a chain of machines multiply the ratios and the efficiencies.
  • Classify levers by the order of fulcrum, load and effort.

Check your understanding

  1. 1. A gear with 30 teeth drives a gear with 10 teeth. If the driver turns at 60 rpm, how fast does the driven gear turn?

    1. 20 rpm
    2. 180 rpm
    3. 60 rpm
    4. 90 rpm
    Show answer

    Answer: B. N₁T₁ = N₂T₂: N₂ = 60 × 30 ÷ 10 = 180 rpm.

  2. 2. Two machines of efficiency 50% and 80% are used one after the other. What is the overall efficiency?

    1. 65%
    2. 130%
    3. 30%
    4. 40%
    Show answer

    Answer: D. Overall efficiency = 0.5 × 0.8 = 0.4 = 40%. Efficiencies multiply; they are not added or averaged.

  3. 3. A 20-tooth driver gear at 120 rpm drives a 40-tooth gear. How does the driven gear turn?

    1. At 60 rpm, with twice the torque
    2. At 240 rpm, with half the torque
    3. At 60 rpm, with half the torque
    4. At 240 rpm, with twice the torque
    Show answer

    Answer: A. N₂ = 120 × 20 ÷ 40 = 60 rpm. A small gear driving a large one lowers the speed and raises the torque by the same factor, 2.

  4. 4. Two machines with VR = 3 and VR = 4 and efficiencies 80% and 90% are used in a chain. What is the overall MA?

    1. 12
    2. 10.8
    3. 8.64
    4. 1.7
    Show answer

    Answer: C. Overall VR = 3 × 4 = 12. Overall efficiency = 0.8 × 0.9 = 0.72. MA = 0.72 × 12 = 8.64.

  5. 5. Which pairing of tool and lever class is correct?

    1. Claw hammer: third class; bottle opener: second class
    2. Claw hammer: first class; bottle opener: third class
    3. Claw hammer: first class; bottle opener: second class
    4. Claw hammer: second class; bottle opener: first class
    Show answer

    Answer: C. A claw hammer pulling a nail pivots between effort and load (first class). In a bottle opener the load lies between the fulcrum and the effort (second class).

Privacy · Terms · Refunds · Delivery