• Practice
  • About 15 min
  • 5 practice questions

Efficiency problems: finding the missing quantity, power and the effect of load

Use η = load ÷ (effort × VR) to find any missing quantity, link efficiency to power and time, and see why efficiency rises with load.

If something looks wrong, please tell us.

Efficiency questions are really one equation in disguise. Once you know that equation and how to rearrange it, every problem in this family is solved in two lines. We then add power and time, and finally look at why a pulley system is more efficient with a heavy load. Take g = 10 m/s².

The master equation

MA = load ÷ effort, and efficiency η = MA ÷ VR. Putting these together: η = L ÷ (E × VR). So L = η × E × VR, E = L ÷ (η × VR) and VR = L ÷ (η × E). For power, output power = load × speed of the load, and input power = output power ÷ η.

Worked examples

Type 1: find η. A machine lifts 900 N using 300 N, and VR = 4. MA = 3, so η = 3 ÷ 4 = 75%.

Type 2: find the load. η = 60%, VR = 5, E = 200 N. L = 0.6 × 5 × 200 = 600 N.

Type 3: find the effort. A load of 1500 N is raised by a machine with VR = 6 and η = 75%. E = 1500 ÷ (0.75 × 6) = 1500 ÷ 4.5 = 333 N (about 333.3 N).

Type 4: from distances and forces. An effort of 250 N moves 6 m and lifts a 900 N load through 1.5 m. Work in = 250 × 6 = 1500 J. Work out = 900 × 1.5 = 1350 J. η = 1350 ÷ 1500 = 90%. Check: VR = 6 ÷ 1.5 = 4 and MA = 900 ÷ 250 = 3.6, so η = 3.6 ÷ 4 = 90%.

Type 5: power. A motor-driven winch lifts a 2000 N load at a steady 0.5 m/s and is 80% efficient. Output power = 2000 × 0.5 = 1000 W. Input power = 1000 ÷ 0.8 = 1250 W. To lift the load 10 m takes 10 ÷ 0.5 = 20 s, using an input energy of 1250 × 20 = 25 000 J.

Type 6: efficiency changes with load. A pulley system has VR = 4. With a load of 200 N the effort is 100 N. With a load of 400 N the effort is 160 N. First case: MA = 2, η = 2 ÷ 4 = 50%. Second case: MA = 2.5, η = 62.5%. The efficiency has risen because much of the energy loss, such as lifting the weight of the movable pulley and overcoming bearing friction, is nearly the same whatever the load. When the load is larger, that fixed loss is a smaller fraction of the total.

The two readings also give the straight-line relation E = aL + b. Here a = (160 − 100) ÷ (400 − 200) = 0.3 and b = 100 − 0.3 × 200 = 40 N, so E = 0.3L + 40. For L = 1000 N, E = 340 N, MA = 2.94 and η = 2.94 ÷ 4 = 73.5%. The efficiency can never exceed 1 ÷ (a × VR) = 1 ÷ 1.2 = 83.3% however large the load becomes.

η = L ÷ (E × VR). Output power = load × speed. Input power = output power ÷ η.

— Rule to remember

Traps

  • Using the percentage as a whole number (60) in place of 0.6 in the equation.
  • Calculating η as VR ÷ MA, which gives a value above 100%.
  • Forgetting that input power is larger than output power, not smaller.

Key takeaways

  • One equation covers L, E, VR and η.
  • Power and time link to the same efficiency.
  • Efficiency of a real machine rises with load.

Check your understanding

  1. 1. A machine with VR = 8 and efficiency 50% is used with an effort of 150 N. The load lifted is:

    1. 300 N
    2. 600 N
    3. 1200 N
    4. 2400 N
    Show answer

    Answer: B. L = η × E × VR = 0.5 × 150 × 8 = 600 N.

  2. 2. To raise a 720 N load with a machine of VR = 4 and efficiency 90%, the effort needed is:

    1. 200 N
    2. 180 N
    3. 162 N
    4. 250 N
    Show answer

    Answer: A. E = L ÷ (η × VR) = 720 ÷ 3.6 = 200 N.

  3. 3. A winch lifts 1200 N at 0.25 m/s and is 60% efficient. The input power is:

    1. 300 W
    2. 180 W
    3. 750 W
    4. 500 W
    Show answer

    Answer: D. Output = 1200 × 0.25 = 300 W. Input = 300 ÷ 0.6 = 500 W.

  4. 4. An effort of 40 N moving 5 m lifts a load of 120 N through 1 m. The efficiency is:

    1. 60%
    2. 40%
    3. 80%
    4. 120%
    Show answer

    Answer: A. Work in = 40 × 5 = 200 J. Work out = 120 × 1 = 120 J. Efficiency = 120 ÷ 200 = 60%.

  5. 5. The efficiency of a pulley system usually rises as the load is increased because:

    1. The velocity ratio increases
    2. Fixed losses are a smaller share
    3. The rope gets shorter
    4. The effort becomes smaller than the load
    Show answer

    Answer: B. A large part of the loss is nearly independent of the load, so at larger loads it is a smaller fraction of the work done.

Privacy · Terms · Refunds · Delivery