Revision notes

Unit 14 Haloalkanes and Haloarenes: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Classification, naming and the nature of the C–X bond

Organic halogen compounds

  • By number of halogens
    • Monohalo: C₂H₅Br (bromoethane)
    • Polyhalo: CCl₃–CH₂–CH₃ (1,1,1-trichloropropane)
  • C(sp³)–X
    • Alkyl halides (haloalkanes): CH₃I
    • Allylic halides: CH₂=CH–CH₂–Cl (X on the carbon next to C=C)
    • Benzylic halides: C₆H₅CH₂Br (X on the carbon next to a ring)
    • Alicyclic halides: bromocyclobutane
  • C(sp²)–X
    • Vinylic halides: CH₂=CHI (X on a doubly bonded carbon)
    • Aryl halides (haloarenes): C₆H₅Cl (X on the ring)
Examples of names
StructureCommon nameIUPAC name
CH₃CH₂CH₂Fn-propyl fluoride1-Fluoropropane
(CH₃)₂CHCH₂Clisobutyl chloride1-Chloro-2-methylpropane
CH₃CH(Cl)CH₂CH₃sec-butyl chloride2-Chlorobutane
(CH₃)₃CCltert-butyl chloride2-Chloro-2-methylpropane
(CH₃)₃CCH₂Brneopentyl bromide1-Bromo-2,2-dimethylpropane
CH₂=CHClvinyl chlorideChloroethene
CH₂=CHCH₂Brallyl bromide3-Bromopropene
ClCH₂CH₂Clethylene dichloride1,2-Dichloroethane
CH₃CHCl₂ethylidene dichloride1,1-Dichloroethane
Carbon–halogen bonds in CH₃X (values from the textbook)
BondBond length (pm)Bond enthalpy (kJ mol⁻¹)Dipole moment (D)
CH₃–F1394521.847
CH₃–Cl1783511.860
CH₃–Br1932931.830
CH₃–I2142341.636

From C–F to C–I: bond length increases, bond enthalpy decreases, so the bond becomes easier to break.

— Trend in carbon–halogen bonds

Key takeaways: halo compounds are classified by number of halogens and by the carbon holding X (sp³: alkyl, allylic, benzylic; sp²: vinylic, aryl); haloalkanes are 1°, 2° or 3°. The C–X bond is polar (Cδ+), and it becomes longer and weaker from F to I.

Read the full lesson

Lesson 2

Preparation and physical properties of haloalkanes

Three more preparations
NameWhat happensExample
Finkelstein reaction (an SN2 reaction)A chloro- or bromoalkane is heated with concentrated NaI in dry acetone to give the iodoalkaneCH₃CH₂Br + NaI → CH₃CH₂I + NaBr
Swarts reactionA chloro- or bromoalkane is heated with a metal fluoride (AgF, SbF₃ or Hg₂F₂) to give the fluoroalkaneCH₃CH₂Br + AgF → CH₃CH₂F + AgBr
Hunsdiecker reactionThe silver salt of a fatty acid is refluxed with Br₂ in CCl₄; the bromoalkane has one carbon fewerCH₃CH₂COOAg + Br₂ → CH₃CH₂Br + CO₂ + AgBr

What raises and what lowers the boiling point of a haloalkane

  • Raises it
    • Larger halogen (I > Br > Cl > F)
    • More halogen atoms
    • Longer carbon chain
    • Straight chain
  • Lowers it
    • Smaller halogen
    • Fewer halogen atoms
    • Shorter chain
    • Branching (more spherical, less surface contact)

Key takeaways: alcohols give haloalkanes with HX (+ ZnCl₂), PX₃, PX₅ or SOCl₂ (cleanest); alkenes add HX; alkanes halogenate in light. Finkelstein makes iodides, Swarts makes fluorides, Hunsdiecker removes one carbon. Boiling point rises with halogen size, number of halogens and chain length, and falls with branching.

Read the full lesson

Lesson 3

Nucleophilic substitution in haloalkanes: products, SN2 and SN1

Reactions of bromoethane, CH₃CH₂Br
ReagentProductEquation
Aqueous KOH, or moist Ag₂O (AgOH)EthanolCH₃CH₂Br + KOH → CH₃CH₂OH + KBr
Alcoholic NH₃ (ammonolysis)EthylamineCH₃CH₂Br + NH₃ → CH₃CH₂NH₂ + HBr
Alcoholic KCNEthyl cyanide (propanenitrile)CH₃CH₂Br + KCN → CH₃CH₂CN + KBr
Alcoholic AgCNEthyl isocyanideCH₃CH₂Br + AgCN → CH₃CH₂NC + AgBr
NaNO₂ or KNO₂Ethyl nitriteCH₃CH₂Br + KNO₂ → CH₃CH₂–O–N=O + KBr
Alcoholic AgNO₂NitroethaneCH₃CH₂Br + AgNO₂ → CH₃CH₂NO₂ + AgBr
NaSH or KSH (alcohol/water)EthanethiolCH₃CH₂Br + NaSH → CH₃CH₂SH + NaBr
Sodium alkoxide (Williamson synthesis)EtherCH₃CH₂Br + NaOCH₂CH₃ → CH₃CH₂OCH₂CH₃ + NaBr

SN2 and SN1 compared

  • SN2
    • One step, through a transition state
    • Rate = k₂[RX][Nu⁻], second order
    • Back-side attack: inversion of configuration
    • Fastest for CH₃X > 1° > 2° > 3° (less crowding)
  • SN1
    • Two steps, through a carbocation
    • Rate = k[RX], first order
    • Attack on both faces: racemisation
    • Fastest for 3° > 2° > 1° > CH₃X (more stable cation)

SN2: one step, rate = k[RX][Nu], inversion, methyl and 1° fastest. SN1: two steps, rate = k[RX], racemisation, 3° fastest.

— Nucleophilic substitution in one line

Key takeaways: OH⁻, NH₃, CN⁻, SH⁻ and RO⁻ replace X to give alcohols, amines, nitriles, thiols and ethers. CN⁻ and NO₂⁻ are ambident: potassium salts give R–CN and R–ONO, silver salts R–NC and R–NO₂. SN2 is one-step, second-order, with inversion; SN1 is two-step, first-order, via a planar carbocation, with racemisation.

Read the full lesson

Lesson 4

Elimination, reactions with metals and Grignard reagents

In dehydrohalogenation the preferred product is the alkene with more alkyl groups on the doubly bonded carbons (the more substituted alkene).

— Saytzeff's rule

E2 and E1 mechanisms

  • E2 (bimolecular)
    • One step: base removes β-H while X⁻ leaves
    • Rate = k[alkyl halide][base], second order
    • Typical of primary haloalkanes with alcoholic KOH
    • Example: 1-chloropropane → propene
  • E1 (unimolecular)
    • Step 1 (slow): C–X ionises to a carbocation
    • Step 2 (fast): base removes a β-H
    • First order in the alkyl halide
    • Typical of tertiary haloalkanes; example: tert-butyl chloride → 2-methylpropene
Synthetic uses of a Grignard reagent RMgX (each addition product is then hydrolysed with H₂O/H⁺)
Reacts withGivesExample with CH₃MgI
Formaldehyde HCHOPrimary alcoholHCHO → CH₃CH₂OH (ethanol)
Other aldehydes RCHOSecondary alcoholCH₃CHO → (CH₃)₂CHOH (propan-2-ol)
KetonesTertiary alcoholCH₃COCH₃ → (CH₃)₃COH (2-methylpropan-2-ol)
Ethyl formate HCOOC₂H₅Aldehyde (excess RMgX: 2° alcohol)HCOOC₂H₅ → CH₃CHO + Mg(I)OC₂H₅
Acid chloride RCOClKetone (excess RMgX: 3° alcohol)CH₃COCl → CH₃COCH₃ + Mg(I)Cl
Solid CO₂Carboxylic acidCO₂ → CH₃COOH
Ethyl chloroformate ClCOOC₂H₅EsterClCOOC₂H₅ → CH₃COOC₂H₅ (ethyl acetate)
Lower halo ether CH₃OCH₂ClHigher ether→ CH₃OCH₂CH₃ (ethyl methyl ether)
Cyanogen chloride ClCNAlkyl cyanide→ CH₃CN + Mg(I)Cl
Water, alcohols, amines (active H)AlkaneH₂O → CH₄; C₂H₅OH → CH₄ + Mg(I)OC₂H₅

Key takeaways: alcoholic KOH eliminates HX and Saytzeff's rule picks the more substituted alkene; E2 is one-step and second-order (1°), E1 two-step via a carbocation (3°). Haloalkanes form RMgX, RLi and TEL. Grignard reagents add their R group to C=O: HCHO → 1°, RCHO → 2°, ketone → 3° alcohol, CO₂ → acid.

Read the full lesson

Lesson 5

Haloarenes and polyhalogen compounds

gem-dihalides and vic-dihalides

  • gem-dihalide: both X on one carbon
    • Example: CH₃CHCl₂, ethylidene dichloride (1,1-dichloroethane)
    • Made from CH₃CHO + PCl₅ → CH₃CHCl₂ + POCl₃, or HC≡CH + 2HCl
    • Aqueous KOH: CH₃CH(OH)₂ → CH₃CHO (an aldehyde)
    • Alcoholic KOH: ethyne
  • vic-dihalide: X on adjacent carbons
    • Example: ClCH₂CH₂Cl, ethylene dichloride (1,2-dichloroethane)
    • Made from CH₂=CH₂ + Cl₂, or HOCH₂CH₂OH + 2PCl₅
    • Aqueous KOH: HOCH₂CH₂OH (a glycol)
    • Zn in methanol: ethene; alcoholic KOH: ethyne

Key takeaways: the sp² carbon and partial double-bond character make the haloarene C–X bond short and strong, so substitution of X needs harsh conditions, while the ring undergoes slower, o,p-directed electrophilic substitution. gem-Dihalides hydrolyse to carbonyl compounds and vic-dihalides to glycols. Chloroform forms phosgene in air and light; freons are named c-b-a; DDT comes from chlorobenzene and chloral.

Read the full lesson

Privacy · Terms · Refunds · Delivery