• Practice
  • About 28 min
  • 5 practice questions

Haloarenes and polyhalogen compounds

Name and prepare haloarenes, explain why their C–X bond resists substitution, write their nucleophilic, metal and electrophilic substitution reactions, and describe gem- and vic-dihalides, methylene chloride, chloroform, carbon tetrachloride, freons and DDT.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name polyhaloarenes and prepare chloro-, iodo- and fluorobenzene.
  • Explain the short, strong C–X bond of haloarenes and its effect on their reactions.
  • Write the Dow, Wurtz–Fittig and Fittig reactions and the o,p-substitution of chlorobenzene.
  • Describe the preparation, reactions and uses of polyhalogen compounds and name freons.

In haloarenes the halogen sits directly on a benzene ring. That one change, from an sp³ to an sp² carbon conjugated with the ring, makes them behave very differently from haloalkanes.

Naming haloarenes

Add the halo prefix to the arene: chlorobenzene. Disubstituted rings use ortho (1,2), meta (1,3) and para (1,4). In polyhaloarenes, number the ring to give the lowest set of locants and write the halogens in alphabetical order, e.g. 1,3,5-tribromobenzene; 1-bromo-4-fluoro-2-iodobenzene.

The C–X bond in haloarenes

Two features strengthen it. (1) The carbon is sp²; an sp² orbital has more s character, is shorter and holds the bond pair more tightly. (2) A lone pair in a p orbital of the halogen is delocalised into the ring (resonance structures with C=X⁺ and negative charge at ortho and para), giving the C–X bond partial double-bond character. The textbook gives C–Cl = 1.70 Å in chlorobenzene against 1.77 Å in chloromethane. A shorter, stronger bond plus an electron-rich ring that repels nucleophiles explains why haloarenes resist nucleophilic substitution.

Preparing haloarenes

  • Direct halogenation: C₆H₆ + Cl₂ → C₆H₅Cl + HCl, with a Lewis acid such as FeCl₃ (in the dark).
  • Sandmeyer reaction: benzenediazonium chloride warmed with Cu₂Cl₂/HCl gives C₆H₅Cl + N₂; with copper powder and HCl it is the Gattermann reaction.
  • Iodobenzene: C₆H₅N₂Cl + KI → C₆H₅I + N₂ + KCl (warm).
  • Fluorobenzene (Balz–Schiemann): C₆H₅N₂Cl + HBF₄ → C₆H₅N₂⁺BF₄⁻ + HCl; on heating, C₆H₅N₂BF₄ → C₆H₅F + BF₃ + N₂.
  • Raschig process (commercial): C₆H₆ + HCl + ½O₂ → C₆H₅Cl + H₂O over CuCl₂ at 525 K.

Physical properties: boiling points iodo > bromo > chloro; isomeric dihalobenzenes boil at nearly the same temperature, but the para isomer melts highest because its symmetrical molecules pack more closely in the crystal (p-dichlorobenzene > o- > m-). Haloarenes are insoluble in water, soluble in organic solvents, and denser than water (iodo > bromo > chloro).

Reactions of haloarenes

  • Nucleophilic substitution only under harsh conditions: C₆H₅Cl + NaOH → C₆H₅OH + NaCl at 623 K and 300 atm (Dow's process); C₆H₅Cl + 2NH₃ → C₆H₅NH₂ + NH₄Cl at 523 K and 50 atm; C₆H₅Cl + CuCN → C₆H₅CN + CuCl in pyridine at 523 K.
  • Wurtz–Fittig: C₆H₅Cl + 2Na + ClC₂H₅ → C₆H₅C₂H₅ + 2NaCl (ether) gives ethylbenzene. Fittig: 2C₆H₅Cl + 2Na → C₆H₅–C₆H₅ + 2NaCl gives biphenyl.
  • Electrophilic substitution at ortho and para, slower than benzene: Cl is deactivating by its −I effect but o,p-directing by its +M effect. Chlorination (Cl₂/FeCl₃), nitration (HNO₃/H₂SO₄), sulphonation (fuming H₂SO₄) and Friedel–Crafts methylation (CH₃Cl/AlCl₃) give the para product as the major and the ortho as the minor isomer.
  • Reduction: C₆H₅Cl + 2[H] → C₆H₆ + HCl, Ni–Al alloy in NaOH.
  • Grignard reagent: C₆H₅Cl + Mg → C₆H₅MgCl in tetrahydrofuran (THF).

Chlorobenzene is used to make pesticides such as DDT, as a high-boiling solvent, and as a fibre-swelling agent in textile processing.

Dihalides

gem-dihalides and vic-dihalides

  • gem-dihalide: both X on one carbon
    • Example: CH₃CHCl₂, ethylidene dichloride (1,1-dichloroethane)
    • Made from CH₃CHO + PCl₅ → CH₃CHCl₂ + POCl₃, or HC≡CH + 2HCl
    • Aqueous KOH: CH₃CH(OH)₂ → CH₃CHO (an aldehyde)
    • Alcoholic KOH: ethyne
  • vic-dihalide: X on adjacent carbons
    • Example: ClCH₂CH₂Cl, ethylene dichloride (1,2-dichloroethane)
    • Made from CH₂=CH₂ + Cl₂, or HOCH₂CH₂OH + 2PCl₅
    • Aqueous KOH: HOCH₂CH₂OH (a glycol)
    • Zn in methanol: ethene; alcoholic KOH: ethyne

They are sweet-smelling colourless liquids; ethylidene chloride boils lower than ethylene dichloride. The different hydrolysis products (an aldehyde from the gem compound, a diol from the vic compound) are used to tell them apart. Methylene chloride, CH₂Cl₂, is made by reducing chloroform (CHCl₃ + 2[H] → CH₂Cl₂ + HCl, with Zn + HCl or H₂/Ni) or by chlorinating methane, and is used as an aerosol propellant, paint remover, process solvent for drugs and metal-cleaning solvent.

Chloroform and carbon tetrachloride

Dumas named CHCl₃ chloroform because it gives formic acid on hydrolysis. In the laboratory it is made from ethanol and bleaching powder (the haloform reaction), bleaching powder supplying Cl₂ and Ca(OH)₂: oxidation CH₃CH₂OH + Cl₂ → CH₃CHO + 2HCl; chlorination CH₃CHO + 3Cl₂ → CCl₃CHO + 3HCl; hydrolysis 2CCl₃CHO + Ca(OH)₂ → 2CHCl₃ + (HCOO)₂Ca. It is a colourless liquid with a sickly smell whose vapour causes unconsciousness.

  • Oxidation in light and air: CHCl₃ + ½O₂ → COCl₂ + HCl. Phosgene is very poisonous, so chloroform is stored in dark bottles filled to the top, with a little ethanol added to destroy any phosgene.
  • Nitration: CHCl₃ + HNO₃ → CCl₃NO₂ + H₂O, chloropicrin, an insecticide and soil sterilising agent.
  • Carbylamine reaction: CH₃NH₂ + CHCl₃ + 3KOH → CH₃NC + 3KCl + 3H₂O; the foul smell of the isocyanide is a test for primary amines.
  • Carbon tetrachloride: made by CH₄ + 4Cl₂ → CCl₄ + 4HCl (light) or CS₂ + 3Cl₂ → CCl₄ + S₂Cl₂ (AlCl₃). Hot water or steam gives phosgene, CCl₄ + H₂O → COCl₂ + 2HCl; iron and dilute HCl reduce it to chloroform.

Worked example 1: balancing the carbylamine reaction

CH₃NH₂ + CHCl₃ + 3KOH → CH₃NC + 3KCl + 3H₂O. C: 1 + 1 = 2 and CH₃NC has 2. H: 5 + 1 + 3 = 9; right 3 + 6 = 9. N: 1 = 1. Cl: 3 = 3. K: 3 = 3. O: 3 = 3. Balanced. The CHCl₃ carbon becomes the isocyanide carbon bonded to nitrogen.

Freons and DDT

Freons (CFCs) are chlorofluoro derivatives of methane and ethane, named Freon-cba where c = carbons − 1, b = hydrogens + 1 and a = fluorines (a leading zero is dropped). Freon-12, CCl₂F₂, is made by the Swarts reaction: CCl₄ + 2HF → CCl₂F₂ + 2HCl (SbCl₅ catalyst). Freons are stable, unreactive, non-corrosive, non-toxic and easily liquefied, and were used as refrigerants and as propellants for aerosols and foams; the textbook notes their adverse environmental effects (Unit 15 explains how they damage the ozone layer).

Worked example 2: freon numbers

(a) CHClF₂: c = 1 − 1 = 0, b = 1 + 1 = 2, a = 2, digits 0-2-2, so Freon-22. (b) CClF₃: c = 0, b = 0 + 1 = 1, a = 3, so Freon-13. (c) C₂Cl₃F₃: c = 1, b = 1, a = 3, so Freon-113.

DDT (p,p'-dichlorodiphenyltrichloroethane) was first made in 1873; in 1939 Paul Müller found it to be an effective insecticide, for which he received the 1948 Nobel Prize in physiology or medicine. It is made by heating chlorobenzene with chloral in concentrated H₂SO₄: 2C₆H₅Cl + CCl₃CHO → (ClC₆H₄)₂CH–CCl₃ + H₂O (C 14 = 12 + 2; H 10 + 1 = 9 + 2; Cl 2 + 3 = 5; O 1 = 1). It was used against insects that carry malaria and yellow fever, and against farm and building pests; the textbook notes it is now banned in many countries because of its long-term toxic effects.

Key takeaways: the sp² carbon and partial double-bond character make the haloarene C–X bond short and strong, so substitution of X needs harsh conditions, while the ring undergoes slower, o,p-directed electrophilic substitution. gem-Dihalides hydrolyse to carbonyl compounds and vic-dihalides to glycols. Chloroform forms phosgene in air and light; freons are named c-b-a; DDT comes from chlorobenzene and chloral.

Check your understanding

  1. 1. Why does chlorobenzene resist nucleophilic substitution much more than chloroethane?

    1. Chlorine is less electronegative in chlorobenzene
    2. Its C–Cl bond has partial double-bond character and the carbon is sp², so the bond is shorter and stronger
    3. Chlorobenzene is a gas
    4. The benzene ring is electron-poor
    Show answer

    Answer: B. Resonance with the chlorine lone pair gives the C–Cl bond some double-bond character, and the sp² carbon holds the bond pair tightly (1.70 Å against 1.77 Å). Also the electron-rich ring repels nucleophiles. So the bond breaks only at high temperature and pressure.

  2. 2. Chlorobenzene is treated with sodium and chloromethane in dry ether. The product is

    1. biphenyl
    2. toluene
    3. benzene
    4. ethylbenzene
    Show answer

    Answer: B. This is the Wurtz–Fittig reaction: C₆H₅Cl + 2Na + ClCH₃ → C₆H₅CH₃ + 2NaCl, joining the phenyl and methyl groups to give toluene. Without the haloalkane (Fittig reaction) biphenyl would form.

  3. 3. Which compound gives an aldehyde when boiled with aqueous KOH?

    1. 1,2-Dichloroethane
    2. 1,1-Dichloroethane
    3. Chloroethane
    4. Chlorobenzene
    Show answer

    Answer: B. In 1,1-dichloroethane both Cl atoms are on one carbon. Replacing them by OH gives CH₃CH(OH)₂, which loses water to form CH₃CHO. 1,2-Dichloroethane gives the glycol, and chloroethane gives ethanol.

  4. 4. What is the freon number of CHClF₂?

    1. Freon-12
    2. Freon-21
    3. Freon-22
    4. Freon-112
    Show answer

    Answer: C. c = carbons − 1 = 0, b = hydrogens + 1 = 2, a = fluorines = 2. The digits are 0-2-2; dropping the leading zero gives Freon-22.

  5. 5. Why is a little ethanol added to chloroform stored for use?

    1. To destroy any phosgene formed by oxidation in air and light
    2. To increase its boiling point
    3. To make it mix with water
    4. To turn it into chloropicrin
    Show answer

    Answer: A. In light and air, CHCl₃ + ½O₂ → COCl₂ + HCl. Phosgene is very poisonous; the small amount of ethanol reacts with it and makes it harmless, and dark, full bottles keep light and air out.

Privacy · Terms · Refunds · Delivery