- Practice
- About 20 min
- 5 practice questions
Classification, naming and the nature of the C–X bond
Classify organic halogen compounds by the number of halogens and the hybridisation of the carbon bearing them, give common and IUPAC names, and explain the polarity, length and strength of carbon–halogen bonds.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify halogen compounds as mono- or polyhalo, and as alkyl, allylic, benzylic, vinylic or aryl halides.
- Tell primary, secondary and tertiary haloalkanes apart.
- Write common and IUPAC names of haloalkanes.
- Explain why the C–X bond is polar and why its strength falls from C–F to C–I.
When one or more hydrogens of a hydrocarbon are replaced by halogen atoms (F, Cl, Br, I) we get haloalkanes or haloarenes. They are key starting materials in synthesis, and many are familiar: the textbook mentions chloramphenicol (from soil microbes, used against typhoid), chloroquine (malaria), halothane (an anaesthetic) and trichloroethylene (a cleaning solvent for electronics).
Classification
Organic halogen compounds
-
By number of halogens
- Monohalo: C₂H₅Br (bromoethane)
- Polyhalo: CCl₃–CH₂–CH₃ (1,1,1-trichloropropane)
-
C(sp³)–X
- Alkyl halides (haloalkanes): CH₃I
- Allylic halides: CH₂=CH–CH₂–Cl (X on the carbon next to C=C)
- Benzylic halides: C₆H₅CH₂Br (X on the carbon next to a ring)
- Alicyclic halides: bromocyclobutane
-
C(sp²)–X
- Vinylic halides: CH₂=CHI (X on a doubly bonded carbon)
- Aryl halides (haloarenes): C₆H₅Cl (X on the ring)
Haloalkanes have the general formula R–X, where R is an alkyl group CₙH₂ₙ₊₁. Like alcohols, they are primary (1°), secondary (2°) or tertiary (3°) according to how many carbons are attached to the carbon carrying the halogen: CH₃CH₂Br is 1°, (CH₃)₂CHCl (isopropyl chloride) is 2°, (CH₃)₃CI (tert-butyl iodide) is 3°.
Naming
In the common system the alkyl group is named, then the halide: methyl iodide, ethyl bromide. In the IUPAC system the halogen is a prefix (fluoro, chloro, bromo, iodo) on the parent alkane, with the chain numbered to give substituents the lowest numbers and prefixes in alphabetical order.
| Structure | Common name | IUPAC name |
|---|---|---|
| CH₃CH₂CH₂F | n-propyl fluoride | 1-Fluoropropane |
| (CH₃)₂CHCH₂Cl | isobutyl chloride | 1-Chloro-2-methylpropane |
| CH₃CH(Cl)CH₂CH₃ | sec-butyl chloride | 2-Chlorobutane |
| (CH₃)₃CCl | tert-butyl chloride | 2-Chloro-2-methylpropane |
| (CH₃)₃CCH₂Br | neopentyl bromide | 1-Bromo-2,2-dimethylpropane |
| CH₂=CHCl | vinyl chloride | Chloroethene |
| CH₂=CHCH₂Br | allyl bromide | 3-Bromopropene |
| ClCH₂CH₂Cl | ethylene dichloride | 1,2-Dichloroethane |
| CH₃CHCl₂ | ethylidene dichloride | 1,1-Dichloroethane |
Worked example 1: naming and classifying
Name CH₃–CH(Cl)–CH₂–CH(CH₃)–CH₃. Step 1: the longest chain has five carbons (pentane). Step 2: numbering from the left gives Cl on C2 and CH₃ on C4 (set 2, 4); from the right gives CH₃ on C2 and Cl on C4 (also 2, 4). The sets tie, so the prefix first in the alphabet, chloro, gets the lower number. Step 3: 2-chloro-4-methylpentane. The carbon carrying Cl is bonded to two other carbons (C1 and C3), so this is a secondary haloalkane.
Nature of the C–X bond
Every halogen is more electronegative than carbon, so the bond is polar, Cδ+–Xδ−. In haloalkanes it forms by overlap of an sp³ orbital of carbon with the half-filled p orbital of the halogen. Down the group the halogen atom becomes larger, so the bond gets longer and weaker from C–F to C–I. The δ+ carbon is what nucleophiles attack, which is why haloalkanes are so reactive.
| Bond | Bond length (pm) | Bond enthalpy (kJ mol⁻¹) | Dipole moment (D) |
|---|---|---|---|
| CH₃–F | 139 | 452 | 1.847 |
| CH₃–Cl | 178 | 351 | 1.860 |
| CH₃–Br | 193 | 293 | 1.830 |
| CH₃–I | 214 | 234 | 1.636 |
From C–F to C–I: bond length increases, bond enthalpy decreases, so the bond becomes easier to break.
Worked example 2: reading the table
How much more energy is needed to break one mole of C–Cl bonds in CH₃Cl than one mole of C–I bonds in CH₃I? Working: 351 − 234 = 117 kJ mol⁻¹. Ratio of lengths C–I to C–F: 214 ÷ 139 = 1.54, so the C–I bond is about half as long again. Notice that the dipole moment is not simply largest for fluorine: CH₃–Cl (1.860 D) is slightly higher than CH₃–F (1.847 D), because dipole moment depends on both the charge separation and the (much shorter) bond length.
Key takeaways: halo compounds are classified by number of halogens and by the carbon holding X (sp³: alkyl, allylic, benzylic; sp²: vinylic, aryl); haloalkanes are 1°, 2° or 3°. The C–X bond is polar (Cδ+), and it becomes longer and weaker from F to I.
Check your understanding
-
1. C₆H₅CH₂Cl is classified as a
- vinylic halide
- aryl halide
- benzylic halide
- allylic halide
Show answer
Answer: C. The chlorine is on a CH₂ carbon (sp³) that is directly attached to the benzene ring, which is the definition of a benzylic halide. In an aryl halide, X would be on a ring carbon itself.
-
2. What is the IUPAC name of (CH₃)₂CH–CH₂–CH₂Br?
- 1-Bromo-3-methylbutane
- 4-Bromo-2-methylbutane
- 1-Bromopentane
- Isopentyl methyl bromide
Show answer
Answer: A. The longest chain containing the C–Br carbon has four carbons. Numbering from the Br end puts Br on C1 and CH₃ on C3 (1, 3), lower than 2, 4 from the other end. So the name is 1-bromo-3-methylbutane.
-
3. Which haloalkane is tertiary?
- CH₃CH₂CH₂Br
- (CH₃)₂CHBr
- (CH₃)₂C(Br)CH₂CH₃
- (CH₃)₂CHCH₂Br
Show answer
Answer: C. In 2-bromo-2-methylbutane the carbon bearing Br is attached to three other carbons (two CH₃ and one CH₂CH₃), so it is tertiary. The other bromides have Br on a carbon joined to one or two carbons.
-
4. Which C–X bond in CH₃X is the longest and weakest?
- C–F
- C–Cl
- C–Br
- C–I
Show answer
Answer: D. Iodine is the largest halogen, so its overlap with carbon is the poorest: the C–I bond is longest (214 pm) and has the lowest bond enthalpy (234 kJ mol⁻¹).
-
5. In CH₂=CH–CH₂–Br, the hybridisation of the carbon attached to bromine is
- sp
- sp²
- sp³
- sp³d
Show answer
Answer: C. The bromine is on the CH₂ carbon, which has four single bonds (two H, one C, one Br), so it is sp³. That makes this an allylic halide, not a vinylic one; in a vinylic halide X sits on an sp² carbon of the C=C.
Sign in to keep track of the lessons you finish.