• Practice
  • About 22 min
  • 5 practice questions

Preparation and physical properties of haloalkanes

Prepare haloalkanes from alcohols, alkenes and alkanes, by Finkelstein and Swarts halogen exchange and by the Hunsdiecker reaction, and explain the trends in their boiling points, solubility and density.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Convert alcohols into haloalkanes with HX, PX₃, PX₅ or SOCl₂.
  • Write the Finkelstein, Swarts and Hunsdiecker reactions.
  • Explain the order of reactivity of alcohols and of halogen acids.
  • Rank haloalkanes by boiling point and explain why they do not dissolve in water.

The commonest way to make a haloalkane is to replace the –OH of an alcohol. Other routes start from alkenes, alkanes, other haloalkanes or carboxylic acid salts.

From alcohols

  • Hydrogen halides: CH₃CH₂OH + HCl → CH₃CH₂Cl + H₂O, with anhydrous ZnCl₂; concentrated HCl with anhydrous ZnCl₂ is Lucas reagent. With HI (from KI + H₃PO₄): (CH₃)₃COH + HI → (CH₃)₃CI + H₂O. Reactivity of acids: HI > HBr > HCl. Reactivity of alcohols: 3° > 2° > 1°.
  • Phosphorus halides: CH₃CH₂OH + PCl₅ → CH₃CH₂Cl + POCl₃ + HCl, and 3CH₃CH₂OH + PCl₃ → 3CH₃CH₂Cl + H₃PO₃. PBr₃ and PI₃ are made in the mixture from red phosphorus and Br₂ or I₂.
  • Thionyl chloride (Darzens halogenation): CH₃CH₂OH + SOCl₂ → CH₃CH₂Cl + SO₂↑ + HCl↑, in pyridine. Both by-products are gases that escape, leaving the haloalkane nearly pure.

Worked example 1: yield from thionyl chloride

How much chloroethane can 23 g of ethanol give with excess SOCl₂? Molar mass C₂H₅OH = 24 + 6 + 16 = 46 g mol⁻¹, so 23 g = 0.50 mol. The equation is 1 : 1, so 0.50 mol C₂H₅Cl forms. Molar mass C₂H₅Cl = 24 + 5 + 35.5 = 64.5 g mol⁻¹. Mass = 0.50 × 64.5 = 32.25 g (assuming complete conversion). Equation check: C 2 = 2; H 6 = 5 + 1; O 1 + 1 = 2 (in SO₂); S 1 = 1; Cl 2 = 1 + 1.

From alkenes and alkanes

Alkenes add HCl, HBr or HI by Markovnikov's rule (Unit 13): CH₃CH=CH₂ + HBr → CH₃CHBrCH₃. Alkanes react with Cl₂ or Br₂ in ultraviolet light by free radical substitution, but give a mixture: CH₄ → CH₃Cl → CH₂Cl₂ → CHCl₃ → CCl₄. Because these products boil at different temperatures, they can be separated by fractional distillation.

Halogen exchange and the Hunsdiecker reaction

Three more preparations
NameWhat happensExample
Finkelstein reaction (an SN2 reaction)A chloro- or bromoalkane is heated with concentrated NaI in dry acetone to give the iodoalkaneCH₃CH₂Br + NaI → CH₃CH₂I + NaBr
Swarts reactionA chloro- or bromoalkane is heated with a metal fluoride (AgF, SbF₃ or Hg₂F₂) to give the fluoroalkaneCH₃CH₂Br + AgF → CH₃CH₂F + AgBr
Hunsdiecker reactionThe silver salt of a fatty acid is refluxed with Br₂ in CCl₄; the bromoalkane has one carbon fewerCH₃CH₂COOAg + Br₂ → CH₃CH₂Br + CO₂ + AgBr

The Finkelstein reaction goes forward because sodium iodide dissolves in dry acetone while sodium bromide and sodium chloride hardly do; the NaBr (or NaCl) comes out of solution and the exchange keeps going.

Worked example 2: choosing a route

Make 1-bromopropane from a carboxylic acid salt. Step 1: Hunsdiecker removes one carbon, so start with a four-carbon acid, butanoic acid, as its silver salt. Step 2: CH₃CH₂CH₂COOAg + Br₂ → CH₃CH₂CH₂Br + CO₂ + AgBr. Atom check: C 4 = 3 + 1; H 7 = 7; O 2 = 2; Ag 1 = 1; Br 2 = 1 + 1. Silver butanoate with bromine in CCl₄ gives 1-bromopropane.

Physical properties

  • Pure haloalkanes are colourless; bromo and iodo compounds turn coloured in light.
  • Boiling points are higher than those of the parent alkanes, because of dipole–dipole attractions as well as stronger van der Waals forces.
  • For the same alkyl group: R–I > R–Br > R–Cl > R–F, e.g. CH₃I > CH₃Br > CH₃Cl > CH₃F.
  • More halogens, higher boiling point: CCl₄ > CHCl₃ > CH₂Cl₂ > CH₃Cl; longer chain, higher boiling point: CH₃CH₂CH₂Cl > CH₃CH₂Cl > CH₃Cl.
  • Branching lowers the boiling point: 1-chlorobutane (351.5 K) > 2-chlorobutane (341 K) > 2-chloro-2-methylpropane (324 K), values from the textbook.
  • Insoluble in water (they cannot form hydrogen bonds with water) but soluble in organic solvents; denser than hydrocarbons of similar molar mass.

What raises and what lowers the boiling point of a haloalkane

  • Raises it
    • Larger halogen (I > Br > Cl > F)
    • More halogen atoms
    • Longer carbon chain
    • Straight chain
  • Lowers it
    • Smaller halogen
    • Fewer halogen atoms
    • Shorter chain
    • Branching (more spherical, less surface contact)

Key takeaways: alcohols give haloalkanes with HX (+ ZnCl₂), PX₃, PX₅ or SOCl₂ (cleanest); alkenes add HX; alkanes halogenate in light. Finkelstein makes iodides, Swarts makes fluorides, Hunsdiecker removes one carbon. Boiling point rises with halogen size, number of halogens and chain length, and falls with branching.

Check your understanding

  1. 1. Which reagent converts ethanol into chloroethane with only gaseous by-products?

    1. PCl₅
    2. PCl₃
    3. SOCl₂
    4. HCl with ZnCl₂
    Show answer

    Answer: C. CH₃CH₂OH + SOCl₂ → CH₃CH₂Cl + SO₂ + HCl. Both SO₂ and HCl are gases and leave the mixture. PCl₅ leaves liquid POCl₃, PCl₃ leaves H₃PO₃, and HCl/ZnCl₂ leaves water.

  2. 2. 1-Chloropropane is heated with sodium iodide in dry acetone. The product and the name of the reaction are

    1. 1-iodopropane, Finkelstein reaction
    2. 1-fluoropropane, Swarts reaction
    3. propene, elimination
    4. propan-1-ol, hydrolysis
    Show answer

    Answer: A. NaI in dry acetone exchanges Cl for I: CH₃CH₂CH₂Cl + NaI → CH₃CH₂CH₂I + NaCl. NaCl precipitates from acetone, which drives the Finkelstein reaction forward.

  3. 3. Which alcohol reacts fastest with Lucas reagent (conc. HCl + anhydrous ZnCl₂)?

    1. Methanol
    2. Propan-1-ol
    3. Propan-2-ol
    4. 2-Methylpropan-2-ol
    Show answer

    Answer: D. The order of reactivity of alcohols with halogen acids is 3° > 2° > 1°. 2-Methylpropan-2-ol is tertiary, so it reacts fastest (it forms the most stable carbocation).

  4. 4. Which compound has the highest boiling point?

    1. CH₃Cl
    2. CH₂Cl₂
    3. CHCl₃
    4. CCl₄
    Show answer

    Answer: D. Boiling point increases with the number of chlorine atoms because molar mass and van der Waals forces increase: CCl₄ > CHCl₃ > CH₂Cl₂ > CH₃Cl.

  5. 5. The silver salt of pentanoic acid, CH₃(CH₂)₃COOAg, is refluxed with Br₂ in CCl₄. The organic product is

    1. 1-bromopentane
    2. 1-bromobutane
    3. 2-bromobutane
    4. pentanoic acid
    Show answer

    Answer: B. In the Hunsdiecker reaction the –COOAg group is lost as CO₂ and replaced by Br: CH₃(CH₂)₃COOAg + Br₂ → CH₃(CH₂)₃Br + CO₂ + AgBr. Five carbons become four: 1-bromobutane.

Privacy · Terms · Refunds · Delivery