• Practice
  • About 26 min
  • 5 practice questions

Elimination, reactions with metals and Grignard reagents

Apply Saytzeff's rule, compare the E2 and E1 mechanisms, write reactions of haloalkanes with metals and reducing agents, list uses of common haloalkanes, and use Grignard reagents to make alcohols, aldehydes, ketones, acids, esters, ethers, cyanides and alkanes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Predict the major alkene from a dehydrohalogenation using Saytzeff's rule.
  • Compare the E2 and E1 mechanisms.
  • Write the reactions of haloalkanes with Mg, Li and Na–Pb, and their reduction.
  • Choose a carbonyl compound and a Grignard reagent to make a given alcohol, acid, aldehyde, ketone or ester.

The same hydroxide ion that substitutes in water eliminates in alcohol. Haloalkanes also give organometallic compounds, of which Grignard reagents are the most useful in building larger molecules.

β-Elimination (dehydrohalogenation)

A haloalkane with a hydrogen on the β-carbon, heated with ethanolic KOH, loses H from the β-carbon and X from the α-carbon, forming a C=C bond: CH₃CH₂Br + KOH → CH₂=CH₂ + KBr + H₂O. When more than one alkene is possible, Saytzeff's rule applies.

In dehydrohalogenation the preferred product is the alkene with more alkyl groups on the doubly bonded carbons (the more substituted alkene).

— Saytzeff's rule

2-Bromobutane, for example, gives mainly but-2-ene (CH₃CH=CHCH₃) with a little but-1-ene (CH₂=CHCH₂CH₃).

Worked example 1: applying Saytzeff's rule

2-Bromopentane, CH₃–CHBr–CH₂–CH₂–CH₃, with alcoholic KOH. Step 1: the β-carbons are C1 and C3. Step 2: losing H from C1 gives CH₂=CH–CH₂CH₂CH₃ (pent-1-ene), with one alkyl group on the C=C. Losing H from C3 gives CH₃–CH=CH–CH₂CH₃ (pent-2-ene), with two alkyl groups on the C=C. Step 3: pent-2-ene is the major product; pent-1-ene is minor. Both are C₅H₁₀ (C₅H₁₁Br minus HBr).

E2 and E1 mechanisms

  • E2 (bimolecular)
    • One step: base removes β-H while X⁻ leaves
    • Rate = k[alkyl halide][base], second order
    • Typical of primary haloalkanes with alcoholic KOH
    • Example: 1-chloropropane → propene
  • E1 (unimolecular)
    • Step 1 (slow): C–X ionises to a carbocation
    • Step 2 (fast): base removes a β-H
    • First order in the alkyl halide
    • Typical of tertiary haloalkanes; example: tert-butyl chloride → 2-methylpropene

Reactions with metals and reduction

  • Magnesium (Grignard reagent): CH₃CH₂Br + Mg → CH₃CH₂MgBr, in dry ether.
  • Lithium: CH₃CH₂Br + 2Li → CH₃CH₂Li + LiBr, in dry ether.
  • Sodium–lead alloy: 4CH₃CH₂Br + 4NaPb → (CH₃CH₂)₄Pb + 4NaBr + 3Pb, giving tetraethyl lead (TEL). Lead check: 4 = 1 + 3.
  • Reduction: with H₂ over Ni or Pd at 523 K, CH₃CH₂Br + H₂ → CH₃CH₃ + HBr; or with HI and red phosphorus, CH₃CH₂I + HI → CH₃CH₃ + I₂.

Uses named in the textbook

  • Chloroform: a solvent in the pharmaceutical industry, used to make pesticides and drugs, a preservative for anatomical specimens, and formerly an anaesthetic (now replaced by safer ones).
  • Iodoform: an antiseptic for dressing wounds, because it releases iodine.
  • Carbon tetrachloride: dry cleaning, a solvent for oils, fats and waxes, and (under the name pyrene) in fire extinguishers for oil and petrol fires, since its vapour does not burn; the textbook notes its harmful effects on the environment.

Grignard reagents

Organometallic compounds contain a direct carbon–metal bond, e.g. CH₃MgI (methylmagnesium iodide). In a Grignard reagent the C–Mg bond is covalent but highly polar, Rδ−–Mgδ+X, because carbon is more electronegative than magnesium. The alkyl group acts as a carbanion (a nucleophile) and attacks the δ+ carbon of C=O. Everything must be dry: water destroys the reagent at once, CH₃MgI + H₂O → CH₄ + Mg(OH)I.

Synthetic uses of a Grignard reagent RMgX (each addition product is then hydrolysed with H₂O/H⁺)
Reacts withGivesExample with CH₃MgI
Formaldehyde HCHOPrimary alcoholHCHO → CH₃CH₂OH (ethanol)
Other aldehydes RCHOSecondary alcoholCH₃CHO → (CH₃)₂CHOH (propan-2-ol)
KetonesTertiary alcoholCH₃COCH₃ → (CH₃)₃COH (2-methylpropan-2-ol)
Ethyl formate HCOOC₂H₅Aldehyde (excess RMgX: 2° alcohol)HCOOC₂H₅ → CH₃CHO + Mg(I)OC₂H₅
Acid chloride RCOClKetone (excess RMgX: 3° alcohol)CH₃COCl → CH₃COCH₃ + Mg(I)Cl
Solid CO₂Carboxylic acidCO₂ → CH₃COOH
Ethyl chloroformate ClCOOC₂H₅EsterClCOOC₂H₅ → CH₃COOC₂H₅ (ethyl acetate)
Lower halo ether CH₃OCH₂ClHigher ether→ CH₃OCH₂CH₃ (ethyl methyl ether)
Cyanogen chloride ClCNAlkyl cyanide→ CH₃CN + Mg(I)Cl
Water, alcohols, amines (active H)AlkaneH₂O → CH₄; C₂H₅OH → CH₄ + Mg(I)OC₂H₅

Worked example 2: designing Grignard syntheses

(a) Make 2-methylbutan-2-ol, (CH₃)₂C(OH)CH₂CH₃. Step 1: it is a tertiary alcohol, so use a ketone. Step 2: the carbinol carbon carries CH₃, CH₃ and C₂H₅; take acetone (supplies the two CH₃) and ethylmagnesium bromide (supplies C₂H₅). Step 3: CH₃COCH₃ + C₂H₅MgBr → (CH₃)₂C(OMgBr)C₂H₅, then H₂O/H⁺ → (CH₃)₂C(OH)C₂H₅. Carbon check: 3 + 2 = 5. (b) Make propanoic acid. It has one carbon more than the ethyl group, so use C₂H₅MgBr with solid CO₂, then hydrolyse: C₂H₅MgBr + CO₂ → C₂H₅COOMgBr → C₂H₅COOH.

Key takeaways: alcoholic KOH eliminates HX and Saytzeff's rule picks the more substituted alkene; E2 is one-step and second-order (1°), E1 two-step via a carbocation (3°). Haloalkanes form RMgX, RLi and TEL. Grignard reagents add their R group to C=O: HCHO → 1°, RCHO → 2°, ketone → 3° alcohol, CO₂ → acid.

Check your understanding

  1. 1. 2-Bromo-3-methylbutane, CH₃CHBrCH(CH₃)₂, is heated with alcoholic KOH. By Saytzeff's rule the major product is

    1. 3-methylbut-1-ene
    2. 2-methylbut-2-ene
    3. 2-methylbutan-2-ol
    4. 3-methylbutan-2-ol
    Show answer

    Answer: B. H can be lost from C1 (giving CH₂=CH–CH(CH₃)₂, one alkyl group on C=C) or from C3 (giving CH₃CH=C(CH₃)₂, three alkyl groups on C=C). The more substituted alkene, 2-methylbut-2-ene, is the major product. Alcohols would come from substitution, not elimination.

  2. 2. Which statement about the E1 mechanism is correct?

    1. It occurs in one step
    2. Its rate depends on both the alkyl halide and the base
    3. It goes through a carbocation formed in a slow first step
    4. It is typical of methyl halides
    Show answer

    Answer: C. In E1 the C–X bond first ionises slowly to a carbocation; then a base removes a β-hydrogen quickly. Only the haloalkane is in the slow step, so it is first order, and it is typical of tertiary haloalkanes.

  3. 3. Which carbonyl compound reacts with CH₃MgI, followed by hydrolysis, to give propan-2-ol?

    1. Formaldehyde
    2. Acetaldehyde
    3. Acetone
    4. Carbon dioxide
    Show answer

    Answer: B. Propan-2-ol, (CH₃)₂CHOH, is a secondary alcohol, so an aldehyde other than formaldehyde is needed. CH₃CHO + CH₃MgI → (CH₃)₂CH–OMgI, which hydrolyses to (CH₃)₂CHOH. Formaldehyde gives ethanol, acetone gives tert-butyl alcohol and CO₂ gives acetic acid.

  4. 4. In a Grignard reagent R–MgX, the carbon bonded to magnesium carries

    1. a partial negative charge, because carbon is more electronegative than Mg
    2. a partial positive charge, because carbon is less electronegative than Mg
    3. no charge, because the bond is purely covalent
    4. a full positive charge
    Show answer

    Answer: A. Carbon is more electronegative than magnesium, so the shared pair is pulled towards carbon: Rδ−–Mgδ+. That is why R behaves as a carbanion and attacks electron-poor carbonyl carbons.

  5. 5. CH₃MgI reacts with ethyl alcohol. The products are

    1. ethane and Mg(I)OH
    2. propane and MgI₂
    3. methane and Mg(I)OC₂H₅
    4. ethyl methyl ether and MgI₂
    Show answer

    Answer: C. Ethanol has an active hydrogen on oxygen. The methyl group takes it as a proton: CH₃MgI + C₂H₅OH → CH₄ + Mg(I)OC₂H₅. Any compound with an O–H or N–H turns a Grignard reagent into an alkane.

Sign in to keep track of the lessons you finish.

Next lesson → Haloarenes and polyhalogen compounds

Privacy · Terms · Refunds · Delivery