- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Hydrogen
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions first, writing your working on paper, then check each answer and explanation. The questions mix calculations, equations and concepts from all five lessons.
Final self-assessment
-
1. Which property of hydrogen makes it resemble the halogens?
- It forms the H⁺ ion
- It has a low ionisation energy like sodium
- It is a reducing agent
- It gains one electron to form H⁻ with a noble-gas configuration
Show answer
Answer: D. Like a halogen forming X⁻, hydrogen can gain one electron to form the hydride ion H⁻, with helium's configuration. Forming H⁺ and acting as a reducing agent are alkali-metal-like, and its ionisation energy is actually high.
-
2. What is the molar mass of super-heavy water, T₂O? (T = 3.016, O = 16.00)
- 20.03 g mol⁻¹
- 22.03 g mol⁻¹
- 18.02 g mol⁻¹
- 24.03 g mol⁻¹
Show answer
Answer: B. T₂O = 2 × 3.016 + 16.00 = 6.032 + 16.00 = 22.03 g mol⁻¹.
-
3. What happens to the ortho : para ratio of hydrogen when it is cooled to a very low temperature?
- The equilibrium shifts towards para-hydrogen
- The equilibrium shifts towards ortho-hydrogen
- The ratio stays at 3 : 1
- All the hydrogen becomes atomic
Show answer
Answer: A. Para-hydrogen is the lower-energy form, so at low temperature the equilibrium favours it. At room temperature the ratio is about 3 : 1 ortho : para.
-
4. 1 kg of methane is converted to hydrogen by steam reforming followed by the shift reaction (overall CH₄ + 2H₂O → CO₂ + 4H₂). What mass of hydrogen is obtained?
- 375 g
- 250 g
- 500 g
- 125 g
Show answer
Answer: C. n(CH₄) = 1000 ÷ 16 = 62.5 mol. Overall 1 mol CH₄ gives 4 mol H₂, so 250 mol H₂ = 250 × 2 = 500 g. (375 g is the hydrogen from reforming alone, 187.5 mol.)
-
5. What volume of hydrogen at 273 K and 1 atm is needed to convert 2.6 g of ethyne completely into ethane over nickel?
- 2.24 L
- 4.48 L
- 6.72 L
- 1.12 L
Show answer
Answer: B. n(C₂H₂) = 2.6 ÷ 26 = 0.1 mol. Ethyne → ethene → ethane uses 2 mol H₂ per mol, so 0.2 mol H₂ = 0.2 × 22.4 = 4.48 L.
-
6. How is tritium prepared?
- By electrolysis of heavy water
- By passing steam over red-hot coke
- By the reaction of zinc with dilute acid
- By bombarding lithium-6 with slow neutrons in a nuclear reactor
Show answer
Answer: D. ⁶₃Li + ¹₀n → ⁴₂He + ³₁T. Tritium is too rare in nature to collect, so it is made by this nuclear reaction. Electrolysis of heavy water gives deuterium.
-
7. In Clark's method, 1.62 g of Ca(HCO₃)₂ is removed with lime: Ca(HCO₃)₂ + Ca(OH)₂ → 2CaCO₃ + 2H₂O. What mass of CaCO₃ precipitates?
- 2.0 g
- 1.0 g
- 1.62 g
- 0.74 g
Show answer
Answer: A. M(Ca(HCO₃)₂) = 162 g mol⁻¹, so n = 0.01 mol. Each mole gives 2 mol CaCO₃: 0.02 mol × 100 g mol⁻¹ = 2.0 g. (0.74 g is the mass of lime used.)
-
8. Which gas is liberated when fluorine reacts with water?
- Hydrogen
- Chlorine
- Oxygen
- Ozone only
Show answer
Answer: C. 2F₂ + 2H₂O → 4HF + O₂. Unlike chlorine, which gives HCl and HOCl, fluorine oxidises water and liberates oxygen.
-
9. How many molecules of water are needed to hydrolyse one molecule of P₄O₁₀ completely to H₃PO₄?
- 4
- 10
- 2
- 6
Show answer
Answer: D. P₄O₁₀ + 6H₂O → 4H₃PO₄. Check: P 4 = 4; H 12 = 4 × 3; O 10 + 6 = 16 = 4 × 4.
-
10. What is the volume strength of a 1.5 M hydrogen peroxide solution?
- 1.5 volume
- 11.2 volume
- 16.8 volume
- 33.6 volume
Show answer
Answer: C. Volume strength = molarity × 11.2 = 1.5 × 11.2 = 16.8. Check: 1.5 mol H₂O₂ per litre gives 0.75 mol O₂ = 0.75 × 22.4 = 16.8 L.
-
11. When old paintings are restored with H₂O₂ (PbS + 4H₂O₂ → PbSO₄ + 4H₂O), how does the oxidation number of sulphur change?
- From −2 to +6
- From +2 to +6
- From −2 to 0
- From +6 to −2
Show answer
Answer: A. In PbS, Pb is +2 so S is −2. In PbSO₄, (+2) + x + 4(−2) = 0 gives x = +6. Sulphur is oxidised from −2 to +6 by H₂O₂.
-
12. Magnesium nitride reacts with heavy water: Mg₃N₂ + 6D₂O → 3Mg(OD)₂ + 2X. What is X?
- NH₃
- ND₃
- N₂
- ND₄OD
Show answer
Answer: B. Balancing: N 2 on the left needs 2X with one N each; D: 12 on the left, 6 in 3Mg(OD)₂, so 6 left for 2X, i.e. 3 D each. X = ND₃, deuterated ammonia.
-
13. Which statement about metallic (interstitial) hydrides is correct?
- They are salt-like solids containing H⁻ ions
- They are gases made of small molecules
- They are formed only by non-metals
- They are often non-stoichiometric, such as TiH₁.₅₋₁.₈, with hydrogen in lattice voids
Show answer
Answer: D. In metallic hydrides hydrogen occupies interstitial sites of the metal lattice, so compositions vary, as in TiH₁.₅₋₁.₈ and PdH₀.₆₋₀.₈. Salt-like H⁻ solids are ionic hydrides; small-molecule gases are covalent hydrides.
-
14. What volume of H₂ at 273 K and 1 atm is released from 100 g of palladium of composition PdH₀.₆ when all the hydrogen is driven out? (Pd = 106.4)
- 12.6 L
- 6.3 L
- 3.2 L
- 0.56 L
Show answer
Answer: B. n(Pd) = 100 ÷ 106.4 = 0.940 mol; H atoms = 0.6 × 0.940 = 0.564 mol; H₂ = 0.282 mol; V = 0.282 × 22.4 = 6.3 L. (12.6 L forgets that two H atoms make one H₂ molecule.)
-
15. Which order of strength of attractions is correct?
- Van der Waals forces > hydrogen bond > covalent bond
- Hydrogen bond > covalent bond > van der Waals forces
- Covalent bond > hydrogen bond > van der Waals forces
- All three are equally strong
Show answer
Answer: C. A covalent bond (over 100 kJ mol⁻¹) is stronger than a hydrogen bond (about 20-50 kJ mol⁻¹), which is stronger than van der Waals forces (under 20 kJ mol⁻¹).
Questions 1-3: lesson 1 (position, isotopes and spin isomers). Questions 4-6: lesson 2 (preparation, properties and uses). Questions 7-9: lesson 3 (water and hardness). Questions 10-12: lesson 4 (heavy water and hydrogen peroxide). Questions 13-15: lesson 5 (hydrides, hydrogen bonding and fuel).
Sign in to keep track of the lessons you finish.