- Practice
- About 25 min
- 5 practice questions
Preparation, properties and uses of hydrogen
Describe how hydrogen, deuterium and tritium are prepared, write the reactions of hydrogen with oxygen, halogens, metals and unsaturated compounds, and calculate quantities in its industrial production and uses.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write equations for preparing hydrogen by electrolysis, in the laboratory and in industry.
- Explain how deuterium and tritium are obtained.
- Write the reactions of hydrogen and deuterium with oxygen, halogens and metals, and describe hydrogenation.
- List the main uses of hydrogen and do stoichiometric calculations on them.
Hydrogen is a key industrial chemical: most of it goes into making ammonia, methanol and hardened oils. Because free hydrogen is rare on earth, it must be made from compounds such as water and hydrocarbons.
Electrolysis of water
Very pure hydrogen (above 99.9%) is made by electrolysing water containing a little acid or alkali, or aqueous NaOH or KOH, with a nickel anode and an iron cathode. It is too costly for large-scale production.
- At the anode: 2OH⁻ → H₂O + ½O₂ + 2e⁻
- At the cathode: 2H₂O + 2e⁻ → 2OH⁻ + H₂
- Overall: H₂O → H₂ + ½O₂
Laboratory preparation
Metals such as zinc, iron or tin react with dilute hydrochloric or sulphuric acid: Zn + 2HCl → ZnCl₂ + H₂ (Zn 1 = 1; H 2 = 2; Cl 2 = 2). The gas is collected by downward displacement of water. Done as a teacher demonstration with small amounts, since hydrogen-air mixtures explode when lit.
Industrial production
- Steam reforming: methane and steam are passed over a nickel catalyst at 800-900 °C and about 35 atm: CH₄ + H₂O → CO + 3H₂ (C 1 = 1; H 4 + 2 = 6 = 3 × 2; O 1 = 1).
- Water gas: steam over red-hot coke at about 1000 °C: C + H₂O → CO + H₂. The mixture CO + H₂ is water gas, also called syngas because it is used to synthesise methanol and simple hydrocarbons.
- Water-gas shift reaction: more steam is mixed in at about 400 °C over an iron-copper catalyst: CO + H₂O → CO₂ + H₂, adding more hydrogen.
- The CO₂ is removed by absorbing it in potassium carbonate solution: CO₂ + K₂CO₃ + H₂O → 2KHCO₃ (K 2 = 2; C 2 = 2; O 2 + 3 + 1 = 6 = 2 × 3; H 2 = 2).
Hydrogen from methane on an industrial scale
- Steam reforming CH₄ + H₂O → CO + 3H₂ over Ni at 800-900 °C.
- Shift reaction CO + H₂O → CO₂ + H₂ over Fe-Cu at about 400 °C.
- Remove CO₂ Absorbed by K₂CO₃ solution as KHCO₃.
- Hydrogen Ready for ammonia, methanol or hydrogenation.
Worked example 1: hydrogen from 1 kg of methane
Working: n(CH₄) = 1000 ÷ 16 = 62.5 mol. Steam reforming gives 3 × 62.5 = 187.5 mol H₂ and 62.5 mol CO. The shift reaction turns the 62.5 mol CO into 62.5 mol more H₂. Total H₂ = 187.5 + 62.5 = 250 mol = 250 × 2 = 500 g. Overall: CH₄ + 2H₂O → CO₂ + 4H₂.
Deuterium and tritium
Deuterium: H₂O is electrolysed more readily than D₂O, so H₂ is set free faster and the remaining water becomes richer in heavy water. Continued electrolysis gives nearly pure D₂O, and electrolysing that gives deuterium: 2D₂O → 2D₂ + O₂. Tritium: too rare to collect, so it is made by bombarding lithium-6 with slow neutrons in a nuclear reactor: ⁶₃Li + ¹₀n → ⁴₂He + ³₁T (mass numbers 6 + 1 = 4 + 3; atomic numbers 3 + 0 = 2 + 1). Tritium is a β-emitter: ³₁T → ³₂He + ⁰₋₁e.
Properties of hydrogen
Hydrogen is a colourless, odourless, tasteless, highly flammable gas, the lightest of all gases. It is a non-polar diatomic molecule and can be liquefied at low temperature and high pressure. Chemically:
- With oxygen: 2H₂ + O₂ → 2H₂O, an explosive reaction releasing much energy, harnessed in fuel cells to make electricity.
- With halogens: H₂ + X₂ → 2HX. Fluorine reacts explosively even in the dark; chlorine at room temperature in light; bromine on heating; iodine in a photochemical reaction. Hydrogen is +1 in these halides.
- With reactive metals: 2Li + H₂ → 2LiH and 2Na + H₂ → 2NaH, hydrides in which hydrogen is −1. They are reducing agents used to make LiAlH₄ and NaBH₄: 4LiH + AlCl₃ → Li[AlH₄] + 3LiCl and 4NaH + B(OCH₃)₃ → Na[BH₄] + 3CH₃ONa.
- Hydrogenation: with finely divided nickel, hydrogen adds to unsaturated compounds: HC≡CH + H₂ → H₂C=CH₂, then H₂C=CH₂ + H₂ → H₃C-CH₃.
- Deuterium reacts the same way (2D₂ + O₂ → 2D₂O; D₂ + X₂ → 2DX) and can replace hydrogen in compounds: CH₄ + 2D₂ → CD₄ + 2H₂; 2NH₃ + 3D₂ → 2ND₃ + 3H₂.
Worked example 2: hydrogenating ethyne
What volume of hydrogen at 273 K and 1 atm converts 2.6 g of ethyne (C₂H₂) completely into ethane? Working: M(C₂H₂) = 2 × 12 + 2 = 26 g mol⁻¹; n = 2.6 ÷ 26 = 0.1 mol. Each mole needs 2 mol H₂ (one for each step), so 0.2 mol H₂ = 0.2 × 22.4 = 4.48 L.
Uses of hydrogen
- Ammonia (Haber process): N₂ + 3H₂ ⇌ 2NH₃ over iron at about 380-450 °C and 200 atm (conditions as given in the textbook). Ammonia makes nitric acid, fertilisers and explosives. The textbook states that over 90% of industrial hydrogen is used for such syntheses.
- Methanol: CO + 2H₂ → CH₃OH with a copper catalyst.
- Vanaspati (margarine): unsaturated vegetable oils are hydrogenated to saturated fats.
- Metallurgy: reducing metal oxides, e.g. CuO + H₂ → Cu + H₂O and WO₃ + 3H₂ → W + 3H₂O.
- Cutting and welding with atomic hydrogen and oxy-hydrogen torches; liquid hydrogen as rocket fuel; fuel cells for electricity; and metal hydride rechargeable batteries.
Key takeaways: pure hydrogen comes from electrolysis, laboratory hydrogen from metals and dilute acids, and industrial hydrogen from steam reforming, water gas and the shift reaction. Deuterium is concentrated by electrolysis of water; tritium is made from lithium-6 and neutrons. Hydrogen burns to water, forms HX with halogens and MH hydrides with active metals, and adds to unsaturated compounds.
Check your understanding
-
1. What volume of hydrogen at 273 K and 1 atm is produced when 5.585 g of iron reacts completely with dilute sulphuric acid? (Fe + H₂SO₄ → FeSO₄ + H₂; Fe = 55.85)
- 1.12 L
- 2.24 L
- 3.36 L
- 22.4 L
Show answer
Answer: B. n(Fe) = 5.585 ÷ 55.85 = 0.1 mol. 1 mol Fe ≡ 1 mol H₂, so 0.1 mol H₂ = 0.1 × 22.4 L = 2.24 L.
-
2. What is water gas?
- A mixture of CO and H₂
- A mixture of CO and N₂
- A mixture of CH₄ and H₂
- Steam mixed with CO₂
Show answer
Answer: A. Steam passed over red-hot coke gives C + H₂O → CO + H₂. This CO + H₂ mixture is water gas, or syngas.
-
3. Which equation is the water-gas shift reaction?
- CH₄ + H₂O → CO + 3H₂
- C + H₂O → CO + H₂
- CO + 2H₂ → CH₃OH
- CO + H₂O → CO₂ + H₂
Show answer
Answer: D. The shift reaction converts the carbon monoxide of water gas into carbon dioxide with more steam over an iron-copper catalyst, producing extra hydrogen: CO + H₂O → CO₂ + H₂.
-
4. What are the products of 4LiH + AlCl₃?
- LiCl and Al
- LiAlCl₄ and H₂
- Li[AlH₄] and 3LiCl
- AlH₃ and LiCl only
Show answer
Answer: C. 4LiH + AlCl₃ → Li[AlH₄] + 3LiCl. Check: Li 4 = 1 + 3; H 4 = 4; Al 1 = 1; Cl 3 = 3. Lithium aluminium hydride is an important reducing agent.
-
5. When sodium is heated in hydrogen, what is the oxidation state of hydrogen in the product?
- +1
- −1
- 0
- +2
Show answer
Answer: B. 2Na + H₂ → 2NaH. Sodium, an alkali metal, is +1, so hydrogen in sodium hydride must be −1: it is present as the hydride ion H⁻.
Sign in to keep track of the lessons you finish.