• Practice
  • About 25 min
  • 5 practice questions

Heavy water and hydrogen peroxide

Describe heavy water, its exchange reactions and uses, and explain the preparation, volume strength, oxidising and reducing reactions, uses and non-planar structure of hydrogen peroxide.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Compare heavy water with ordinary water and write its exchange reactions.
  • Use deuterium exchange to count ionisable hydrogens and to make deuterated compounds.
  • Prepare hydrogen peroxide and convert between volume strength, molarity and percentage strength.
  • Write reactions showing H₂O₂ as an oxidising and as a reducing agent, and describe its structure.

Two compounds of hydrogen with oxygen are especially useful: heavy water, D₂O, important in nuclear reactors and research, and hydrogen peroxide, H₂O₂, a clean oxidising agent used from hospitals to paper mills.

Heavy water

Heavy water (D₂O) is the oxide of heavy hydrogen. It occurs in ordinary water only in very small amounts and is obtained mainly by prolonged electrolysis of water, since D₂O is electrolysed less readily than H₂O. It is colourless, odourless and tasteless, but its physical properties differ noticeably from those of H₂O.

Water and heavy water compared (values given in the textbook)
Property (at 298 K unless stated)H₂OD₂O
Molar mass (g mol⁻¹)18.01520.028
Melting point (K)273.0276.8
Boiling point (K)373.0374.4
Temperature of maximum density (K)277.0284.2
Density (g cm⁻³)0.9971.104

Exchange reactions of heavy water

When compounds containing ionisable (acidic or basic) hydrogen are treated with D₂O, those hydrogens exchange for deuterium: 2NaOH + D₂O → 2NaOD + HOD; HCl + D₂O → DCl + HOD; NH₄Cl + 4D₂O → ND₄Cl + 4HOD. This lets chemists count the ionisable hydrogens in a molecule. Hypophosphorous acid, H₃PO₂, exchanges only one hydrogen (H₃PO₂ + D₂O → H₂DPO₂ + HDO), showing that it is a monobasic acid: the other two hydrogens are bonded directly to phosphorus.

D₂O also makes deuterated compounds (each equation balanced for every atom):

  • Al₄C₃ + 12D₂O → 4Al(OD)₃ + 3CD₄ (Al 4; C 3; D 24 = 12 + 12; O 12)
  • CaC₂ + 2D₂O → Ca(OD)₂ + C₂D₂ (deuterated ethyne)
  • Mg₃N₂ + 6D₂O → 3Mg(OD)₂ + 2ND₃ (deuterated ammonia)
  • Ca₃P₂ + 6D₂O → 3Ca(OD)₂ + 2PD₃ (deuterated phosphine)

Uses: heavy water is a moderator in nuclear reactors (it slows fast neutrons), a coolant in some reactors, and a tracer for studying the mechanisms of organic and metabolic reactions.

Hydrogen peroxide: preparation

H₂O₂ can be made by treating a metal peroxide with dilute acid: BaO₂ + H₂SO₄ → BaSO₄ + H₂O₂ and Na₂O₂ + H₂SO₄ → Na₂SO₄ + H₂O₂. On an industrial scale it is made by the autoxidation of 2-alkylanthraquinols: 2-ethylanthraquinol is oxidised by air to 2-ethylanthraquinone and H₂O₂; the H₂O₂ is extracted into water (about 40% solution), and the quinone is reduced back with hydrogen and a catalyst and used again.

Physical properties and volume strength

Pure H₂O₂ is an almost colourless (pale blue) liquid, less volatile and more viscous than water. Its strength is often given as volume strength: an 'x-volume' solution gives x mL of oxygen at STP (273 K, 1 atm) from 1 mL of solution on decomposition, 2H₂O₂ → 2H₂O + O₂. A 30% solution is sold as '100-volume'.

Molarity of H₂O₂ = volume strength ÷ 11.2, because 1 mol of H₂O₂ gives ½ mol O₂ = 11.2 L at 273 K and 1 atm.

— Volume strength shortcut

Worked example 1: a 20-volume solution

1 L of 20-volume H₂O₂ gives 20 L of O₂ at 273 K and 1 atm. Working: n(O₂) = 20 ÷ 22.4 = 0.893 mol; n(H₂O₂) = 2 × 0.893 = 1.786 mol, so the molarity is 1.79 M (shortcut: 20 ÷ 11.2 = 1.79). Mass = 1.786 × 34 = 60.7 g per litre, i.e. about 6.1% (w/v).

Chemical properties

H₂O₂ is unstable: it slowly disproportionates, H₂O₂ → H₂O + ½O₂, and the reaction can become violent when catalysed by metals. Glass releases alkali metal ions that catalyse it, so H₂O₂ is stored in plastic bottles. It acts as both an oxidising and a reducing agent; oxidations are usually carried out in acid and reductions in base.

  • Oxidising agent (acid): H₂O₂ + 2H⁺ + 2e⁻ → 2H₂O. Example: 2FeSO₄ + H₂SO₄ + H₂O₂ → Fe₂(SO₄)₃ + 2H₂O (Fe 2; S 3; O 8 + 4 + 2 = 14 = 12 + 2; H 4 = 4); Fe goes from +2 to +3.
  • Reducing agent (base): HO₂⁻ + OH⁻ → O₂ + H₂O + 2e⁻. Example: 2KMnO₄ + 3H₂O₂ → 2MnO₂ + 2KOH + 2H₂O + 3O₂ (K 2; Mn 2; O 8 + 6 = 14 = 4 + 2 + 2 + 6; H 6 = 2 + 4); Mn goes from +7 to +4.

Uses

Because its products, water and oxygen, are harmless, H₂O₂ is used to treat water by oxidising pollutants, as a mild antiseptic, and as a bleach for textiles, paper and hair. It also restores old paintings whose white lead pigment has been blackened to PbS by hydrogen sulphide in air: PbS + 4H₂O₂ → PbSO₄ + 4H₂O (sulphur goes from −2 to +6, giving white lead sulphate).

Structure of hydrogen peroxide

H₂O₂ is non-planar. The two O-H bonds lie in different planes, like the covers of a partly open book with the O-O bond along the spine, because the O-H bonds are repelled by the lone pairs on the oxygen atoms. It is the smallest molecule known to show hindered rotation about a single bond. According to the textbook, in the gas phase the dihedral angle is 111.5° and the O-O-H angle 94.8°; in the solid, hydrogen bonding reduces the dihedral angle to 90.2° and opens the O-O-H angle to 101.9°.

H₂O₂ as oxidant and as reductant

  • Oxidising agent
    • Usually in acidic medium
    • H₂O₂ + 2H⁺ + 2e⁻ → 2H₂O
    • Fe²⁺ → Fe³⁺; PbS → PbSO₄
  • Reducing agent
    • Usually in basic medium
    • HO₂⁻ + OH⁻ → O₂ + H₂O + 2e⁻
    • MnO₄⁻ → MnO₂, with O₂ given off

Key takeaways: D₂O is denser and boils and melts higher than H₂O; it exchanges with ionisable hydrogens and is a moderator, coolant and tracer. H₂O₂ is made from peroxides and acid or by anthraquinol autoxidation; molarity = volume strength ÷ 11.2. It oxidises in acid and reduces in base, is a clean bleach and antiseptic, and has a non-planar open-book structure.

Check your understanding

  1. 1. What is the molarity of an 11.2-volume hydrogen peroxide solution?

    1. 0.5 M
    2. 1 M
    3. 2 M
    4. 11.2 M
    Show answer

    Answer: B. 1 L gives 11.2 L of O₂ = 11.2 ÷ 22.4 = 0.5 mol O₂. Since 2H₂O₂ → 2H₂O + O₂, n(H₂O₂) = 2 × 0.5 = 1 mol, so the solution is 1 M (11.2 ÷ 11.2 = 1).

  2. 2. Hypophosphorous acid, H₃PO₂, exchanges only one hydrogen with D₂O. How many ionisable hydrogens does it have?

    1. 3
    2. 2
    3. 0
    4. 1
    Show answer

    Answer: D. Only ionisable (O-H) hydrogens exchange with D₂O. One exchange means one ionisable hydrogen, so H₃PO₂ is monobasic; the other two are bonded to phosphorus.

  3. 3. In 2KMnO₄ + 3H₂O₂ → 2MnO₂ + 2KOH + 2H₂O + 3O₂, hydrogen peroxide acts as

    1. a reducing agent
    2. an oxidising agent
    3. an acid
    4. a catalyst only
    Show answer

    Answer: A. Manganese is reduced from +7 to +4, and oxygen in H₂O₂ is oxidised from −1 to 0 in O₂. H₂O₂ gives up electrons, so it is the reducing agent here.

  4. 4. According to the textbook, what is the dihedral angle of hydrogen peroxide in the gas phase?

    1. 90.2°
    2. 94.8°
    3. 111.5°
    4. 180°
    Show answer

    Answer: C. In the gas phase the dihedral angle is 111.5°; in the solid it falls to 90.2° because of hydrogen bonding. 94.8° is the O-O-H angle in the gas phase, and 180° would mean a planar molecule, which H₂O₂ is not.

  5. 5. Why is heavy water used in nuclear reactors?

    1. To slow down fast neutrons, as a moderator
    2. To absorb all neutrons and stop the reaction
    3. As the nuclear fuel itself
    4. To speed up neutrons
    Show answer

    Answer: A. Heavy water lowers the energy of fast neutrons, acting as a moderator; it is also used as a coolant. It is not a fuel.

Privacy · Terms · Refunds · Delivery