• Practice
  • About 24 min
  • 5 practice questions

Alkaline earth metals: properties, beryllium's behaviour and uses

Explain the trends in the physical properties of group 2, compare their ionisation enthalpies with group 1, describe beryllium's anomalous behaviour and diagonal relationship with aluminium, and write reactions with halogens and hydrogen.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write the ns² configuration of group 2 elements and explain their +2 oxidation state.
  • Explain why group 2 has higher first but much lower second ionisation enthalpies than group 1.
  • Give the flame colours of calcium, strontium and barium.
  • Contrast beryllium with the rest of group 2, list its similarities with aluminium, and give uses of the group 2 metals.

Group 2 contains beryllium, magnesium, calcium, strontium, barium and radium. Apart from beryllium they are called alkaline earth metals, because their oxides and hydroxides are alkaline and these oxides occur in the earth's crust. Magnesium and calcium are very common: magnesium in carnallite (KCl·MgCl₂·6H₂O), magnesite and dolomite (MgCO₃·CaCO₃); calcium in chalk, limestone, gypsum and fluorapatite. Strontium occurs in celestite (SrSO₄), barium in barytes (BaSO₄), beryllium in beryl (Be₃Al₂Si₆O₁₈), and radium, a decay product of uranium, in uranium ores.

General characteristics

Electronic configuration of group 2
ElementAtomic numberConfiguration
Be4[He] 2s²
Mg12[Ne] 3s²
Ca20[Ar] 4s²
Sr38[Kr] 5s²
Ba56[Xe] 6s²
Ra88[Rn] 7s²
  • Oxidation state: losing both ns² electrons gives a noble gas configuration, so the elements show +2.
  • Radii: smaller than the alkali metal in the same period, because the extra nuclear charge pulls the electrons in. They increase down the group as shells are added.
  • Ionisation enthalpy: low compared with p-block elements and decreasing down the group, but higher than group 1 in the same period, because the atoms are smaller. So group 2 metals are less electropositive than group 1.
  • Hydration enthalpy: larger than for alkali metal ions (smaller ions, double charge) and decreasing Be²⁺ > Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺. That is why MgCl₂ and CaCl₂ crystallise as hydrates while NaCl and KCl do not.
  • Electronegativity: decreases down the group, as in group 1.

First and second ionisation enthalpies compared

For sodium, the second electron must come out of Na⁺, which already has the neon configuration, so its second ionisation enthalpy is very high. For magnesium, the second electron comes from Mg⁺, which still has one electron in the 3s orbital. So although IE₁ of Mg is higher than that of Na, IE₂ of Mg is far lower than IE₂ of Na. The energy to form M²⁺ is repaid by the very large hydration or lattice enthalpy of the doubly charged ion, which is why group 2 forms M²⁺ compounds.

Worked example 1: energy to form Mg²⁺

Using the textbook's values IE₁ = 737.8 kJ mol⁻¹ and IE₂ = 1450.7 kJ mol⁻¹ for magnesium, find the energy needed to change 1 mol of gaseous Mg atoms into Mg²⁺ ions, and for 0.25 mol. Working: total = IE₁ + IE₂ = 737.8 + 1450.7 = 2188.5 kJ mol⁻¹. For 0.25 mol: 0.25 × 2188.5 = 547.1 kJ. The magnitude of the hydration enthalpy of Mg²⁺ (1921 kJ mol⁻¹ in the textbook's table) shows how much energy is returned when the ion enters water.

Flame colours

Flame colours of group 2 salts (wavelengths as given in the Tamil Nadu textbook)
ElementFlame colourWavelength (nm)
CalciumBrick red622
StrontiumCrimson red689
BariumApple green554

Beryllium and magnesium give no flame colour: their electrons are held so tightly that the flame cannot excite them. Strontium and barium salts give the red and green of fireworks.

Anomalous behaviour of beryllium

Beryllium differs from the rest of the group because of its very small size and high polarising power, its relatively high electronegativity and ionisation enthalpy, and the absence of d-orbitals in its valence shell.

Beryllium compared with the other group 2 elements
BerylliumOther group 2 elements
Forms covalent compoundsForm ionic compounds
High melting and boiling pointsLower melting and boiling points
Does not react with water even when heatedReact with water
Does not combine directly with hydrogenCombine directly with hydrogen
Halides are covalentHalides are ionic
Oxide and hydroxide are amphotericOxides and hydroxides are basic
Not readily attacked by acids (protective oxide film)Readily attacked by acids
Carbide gives methane with waterCarbides (such as CaC₂) give acetylene
Salts are extensively hydrolysedSalts are hydrolysed less

Diagonal relationship with aluminium

Be²⁺ and Al³⁺ are not very close in size, but their charge-to-size ratios are similar and the two elements have nearly the same electronegativity, so beryllium resembles aluminium.

Ways beryllium resembles aluminium

  • Chlorides
    • BeCl₂ and AlCl₃ form chloride-bridged dimers
    • Soluble in organic solvents
    • Strong Lewis acids
  • Hydroxides
    • Both amphoteric
    • Dissolve in excess alkali: [Be(OH)₄]²⁻ and [Al(OH)₄]⁻
  • Complexes
    • Strong tendency to form complexes such as [BeF₄]²⁻ and [AlF₆]³⁻
  • Carbides and acids
    • Be₂C and Al₄C₃ give methane with water
    • Both made passive by nitric acid

Worked example 2: balancing carbide hydrolysis

Balance the reactions of Be₂C and CaC₂ with water. Working: Be₂C + 4H₂O → 2Be(OH)₂ + CH₄. Check: Be 2 = 2; C 1 = 1; H 8 = 4 + 4; O 4 = 4. CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂. Check: Ca 1 = 1; C 2 = 2; H 4 = 2 + 2; O 2 = 2. So beryllium carbide gives methane while calcium carbide gives acetylene (ethyne).

Reactions with halogens and hydrogen

  • The metals are less reactive than group 1, and reactivity increases down the group.
  • Halogens at high temperature: M + X₂ → MX₂. BeF₂ is best made by heating (NH₄)₂BeF₄; BeCl₂ is made from the oxide: BeO + C + Cl₂ → BeCl₂ + CO (600–800 K).
  • Hydrogen on heating: M + H₂ → MH₂ for all except beryllium. BeH₂ is made indirectly: 2BeCl₂ + LiAlH₄ → 2BeH₂ + LiCl + AlCl₃.

Uses of the group 2 metals

  • Beryllium: low atomic number and very weak absorption of X-rays, so it makes windows for X-ray tubes and detectors and sample holders; it is used for beam pipes in particle accelerators and in detectors.
  • Magnesium: removes sulphur from iron and steel; light alloys for aircraft and missiles; photo-engraving plates; Grignard reagents; desiccant; sacrificial anode against corrosion.
  • Calcium: reducing agent in extracting uranium, zirconium and thorium; deoxidiser and desulphuriser for alloys; getter in vacuum tubes; in cement, mortar, fertilisers and plaster.
  • Strontium: ⁹⁰Sr in cancer therapy; ⁸⁷Sr/⁸⁶Sr ratios in dating rocks, marine studies, tracing animal migration and forensic work.
  • Barium: compounds in fireworks and radiology; deoxidiser in copper refining; Ba–Ni alloys in spark plugs and electron tubes; ¹³³Ba to calibrate gamma-ray detectors.
  • Radium: formerly in self-luminous paints for dials.

Key takeaways: group 2 elements are ns², +2, smaller and harder to ionise first than group 1, but easier to ionise a second time. Beryllium is covalent, amphoteric and unreactive with water, and resembles aluminium diagonally.

Check your understanding

  1. 1. Why is the second ionisation enthalpy of magnesium much lower than that of sodium?

    1. Magnesium has a smaller nuclear charge than sodium.
    2. For magnesium the second electron is removed from Mg⁺, which still has a 3s electron; for sodium it comes from the stable neon core of Na⁺.
    3. Magnesium is an alkali metal.
    4. The first ionisation enthalpy of magnesium is lower than that of sodium.
    Show answer

    Answer: B. Na⁺ already has a noble gas configuration, so removing another electron means breaking into the 2p shell. Mg⁺ still has one 3s electron, which is far easier to remove. Mg actually has the higher nuclear charge and the higher IE₁.

  2. 2. Which salt gives an apple-green flame?

    1. Calcium chloride
    2. Strontium chloride
    3. Barium chloride
    4. Magnesium chloride
    Show answer

    Answer: C. Barium gives apple green, calcium brick red and strontium crimson red. Magnesium gives no flame colour because its electrons are held too tightly to be excited by the flame.

  3. 3. Which property of beryllium is NOT shared by the other alkaline earth metals?

    1. Its compounds show the +2 oxidation state.
    2. Its oxide and hydroxide are amphoteric.
    3. It has two valence electrons.
    4. It forms a chloride with formula MCl₂.
    Show answer

    Answer: B. All group 2 elements are ns², +2 and form MCl₂. Only BeO and Be(OH)₂ react with both acids and alkalis (amphoteric); the oxides and hydroxides of the others are basic.

  4. 4. Which balanced equation shows how BeH₂ is prepared?

    1. Be + H₂ → BeH₂
    2. BeCl₂ + H₂ → BeH₂ + Cl₂
    3. BeCl₂ + LiAlH₄ → BeH₂ + LiCl + AlCl₃
    4. 2BeCl₂ + LiAlH₄ → 2BeH₂ + LiCl + AlCl₃
    Show answer

    Answer: D. Beryllium does not combine directly with hydrogen, so BeH₂ is made with lithium aluminium hydride. Atom check: Be 2 = 2; Cl 4 = 1 + 3; Li 1 = 1; Al 1 = 1; H 4 = 4. The version with one BeCl₂ leaves the chlorine and hydrogen unbalanced.

  5. 5. Beryllium shows a diagonal relationship with

    1. magnesium
    2. boron
    3. lithium
    4. aluminium
    Show answer

    Answer: D. The diagonal partner of beryllium (period 2, group 2) is aluminium (period 3, group 13). Their charge-to-size ratios and electronegativities are similar, so both form covalent bridged chlorides, amphoteric hydroxides and carbides that give methane.

Privacy · Terms · Refunds · Delivery