- Practice
- About 22 min
- 5 practice questions
s-block elements and the general characteristics of alkali metals
Place the s-block in the periodic table and explain the trends in configuration, oxidation state, radii, ionisation enthalpy, hydration enthalpy, electronegativity and flame colour of the alkali metals.
If something looks wrong, please tell us.
By the end of this lesson you can
- Say which elements make up the s-block and why group 1 metals are called alkali metals.
- Write the ns¹ configuration of each alkali metal and explain why the only oxidation state is +1.
- Explain the trends in atomic radius, ionisation enthalpy, hydration enthalpy and electronegativity down group 1.
- Explain flame colours in terms of excited electrons and calculate the energy of the light given out.
Groups 1 and 2 of the modern periodic table form the s-block, because the last electron of their atoms enters an s orbital. Group 1 metals are the alkali metals and group 2 metals the alkaline earth metals. The name 'alkali' comes from an Arabic word for plant ashes: water poured through burnt plant ash (potash) gives a solution rich in potassium carbonate, which is strongly alkaline.
Where alkali metals are found
Group 1 contains lithium, sodium, potassium, rubidium, caesium and francium. They are soft, silvery, very reactive metals, so they never occur free in nature; they are always found as compounds, and in the laboratory they are kept under oil (kerosene) away from air and water. Typical minerals are spodumene LiAl(SiO₃)₂ for lithium, rock salt NaCl for sodium and sylvite KCl for potassium. Rubidium and caesium occur only in tiny amounts alongside other alkali metal minerals. Francium is radioactive; its longest-lived isotope has a half-life of only about 21 minutes, so almost none exists naturally.
Electronic configuration and oxidation state
| Element | Symbol | Atomic number | Configuration |
|---|---|---|---|
| Lithium | Li | 3 | [He] 2s¹ |
| Sodium | Na | 11 | [Ne] 3s¹ |
| Potassium | K | 19 | [Ar] 4s¹ |
| Rubidium | Rb | 37 | [Kr] 5s¹ |
| Caesium | Cs | 55 | [Xe] 6s¹ |
| Francium | Fr | 87 | [Rn] 7s¹ |
Every alkali metal has a single electron, ns¹, outside a noble gas core, where n is the period number. Losing it gives an M⁺ ion with the stable noble gas configuration. Removing a second electron would mean breaking into that stable core, which needs far more energy. So the alkali metals are strongly electropositive and show only the +1 oxidation state.
Group 1: valence configuration ns¹, one oxidation state (+1), first ionisation enthalpy low, second ionisation enthalpy very high.
Trends down the group
- Atomic and ionic radii: each alkali metal begins a new period, so it has the largest atom in its period. Down the group a new shell is added each time, so the radii increase from Li to Cs. The M⁺ ion is smaller than its atom because the whole outer shell is lost.
- Ionisation enthalpy: the lowest in each period. It decreases down the group (Li 520 to Cs 376 kJ mol⁻¹, according to the textbook's table) because the outer electron is further from the nucleus and more inner shells screen it.
- Hydration enthalpy: the energy released when a gaseous ion is surrounded by water molecules. A smaller ion attracts water more strongly, so hydration enthalpy decreases (becomes less negative) from Li⁺ to Cs⁺. Li⁺, the smallest ion, is the most strongly hydrated, which is why lithium salts are often more soluble than the matching salts of the other alkali metals.
- Electronegativity: small (about 1.0 for Li down to 0.7 for Cs). With very electronegative elements such as the halogens they therefore form ionic compounds.
- Melting and boiling points: low, and falling down the group, because the single valence electron gives weak metallic bonding that weakens further as atoms get bigger.
Why reactivity rises from lithium to caesium
- A new shell is added Atomic radius increases down the group
- More inner-shell screening The nucleus holds the ns¹ electron less tightly
- Ionisation enthalpy falls Less energy is needed to form M⁺
- Metal loses its electron more easily Reactivity and electropositive character increase
Worked example 1: comparing trends
Arrange Li⁺, Na⁺ and K⁺ in order of (a) ionic radius and (b) hydration enthalpy. Working: (a) each step down the group adds a shell, so radius increases Li⁺ < Na⁺ < K⁺. (b) The smaller the ion, the more strongly it holds water, so the magnitude of hydration enthalpy is Li⁺ > Na⁺ > K⁺. The two orders are opposite, which is a common exam check.
Flame colours
A salt moistened with concentrated hydrochloric acid and held on a platinum wire in a flame colours the flame. The heat excites the valence electron to a higher energy level; when it falls back, the extra energy is given out as light of a definite wavelength. For the alkali metals this light lies in the visible region, so each metal shows a characteristic colour.
| Element | Flame colour | Wavelength (nm) |
|---|---|---|
| Lithium | Crimson red | 670.8 |
| Sodium | Yellow | 589.2 |
| Potassium | Lilac (violet) | 766.5 |
| Rubidium | Reddish violet | 780.0 |
| Caesium | Blue | 455.5 |
Worked example 2: energy of the sodium flame line
Find the energy of one photon of sodium's yellow light, λ = 589 nm, and the energy per mole of photons. Use h = 6.626 × 10⁻³⁴ J s, c = 3.0 × 10⁸ m s⁻¹, Nₐ = 6.022 × 10²³ mol⁻¹. Working: E = hc/λ = (6.626 × 10⁻³⁴ × 3.0 × 10⁸) ÷ (589 × 10⁻⁹) J = (1.9878 × 10⁻²⁵) ÷ (5.89 × 10⁻⁷) J = 3.375 × 10⁻¹⁹ J per photon. Per mole: 3.375 × 10⁻¹⁹ J × 6.022 × 10²³ mol⁻¹ = 2.032 × 10⁵ J mol⁻¹ = 203 kJ mol⁻¹. This is the energy gap the excited electron falls through.
Key takeaways: the s-block is groups 1 and 2. Alkali metals are ns¹, always +1, have the largest atoms and lowest ionisation enthalpies in their periods. Down the group radius rises, while ionisation enthalpy, hydration enthalpy and electronegativity fall. Flame colours come from excited electrons returning to their normal level.
Check your understanding
-
1. Why do alkali metals show only the +1 oxidation state?
- They have very high electronegativity.
- After losing one electron the ion has a noble gas configuration, and removing a second electron needs much more energy.
- Their first ionisation enthalpy is the highest in each period.
- They have two electrons in the valence shell.
Show answer
Answer: B. The single ns¹ electron is lost easily, leaving a stable noble gas core. The second ionisation enthalpy is very high because the next electron would come from that stable core, so M²⁺ is not formed in chemical reactions.
-
2. Which order of hydration enthalpy (magnitude) is correct for the alkali metal ions?
- Cs⁺ > Rb⁺ > K⁺ > Na⁺ > Li⁺
- Na⁺ > Li⁺ > K⁺ > Rb⁺ > Cs⁺
- Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺
- All alkali metal ions have the same hydration enthalpy.
Show answer
Answer: C. Hydration enthalpy depends on how strongly the ion attracts water molecules. Li⁺ is the smallest ion, so it is hydrated most strongly; the ions get larger down the group and their hydration enthalpy falls in size.
-
3. The ionisation enthalpy of alkali metals decreases down the group mainly because
- the nuclear charge decreases down the group
- the atomic size and the screening by inner shells both increase
- the number of valence electrons increases
- the metals become more electronegative
Show answer
Answer: B. Nuclear charge actually rises down the group, but each new shell puts the ns¹ electron further out and adds screening electrons in between. The outer electron is held less tightly, so less energy removes it.
-
4. A potassium salt gives a lilac flame at about 766 nm. What is the energy of one photon of this light? (h = 6.626 × 10⁻³⁴ J s, c = 3.0 × 10⁸ m s⁻¹)
- 2.60 × 10⁻¹⁹ J
- 5.08 × 10⁻¹⁹ J
- 1.52 × 10⁻²⁷ J
- 3.38 × 10⁻¹⁹ J
Show answer
Answer: A. E = hc/λ = (6.626 × 10⁻³⁴ × 3.0 × 10⁸) ÷ (766 × 10⁻⁹) J = (1.9878 × 10⁻²⁵) ÷ (7.66 × 10⁻⁷) J = 2.60 × 10⁻¹⁹ J. The value 3.38 × 10⁻¹⁹ J belongs to sodium's 589 nm line.
-
5. Assertion (A): Alkali metals are kept under kerosene. Reason (R): Alkali metals react readily with air and water.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. Both are true. Because the metals react quickly with oxygen and moisture, they are stored under kerosene (oil), which keeps air and water away. R is exactly the reason for A.
Sign in to keep track of the lessons you finish.