• Practice
  • About 26 min
  • 5 practice questions

Compounds of alkaline earth metals: lime, slaked lime, gypsum and plaster of Paris

Describe the oxides, hydroxides, halides, carbonates, sulphates and nitrates of group 2 with their trends, give the preparation, properties and uses of quick lime, slaked lime, gypsum and plaster of Paris, and state the biological role of magnesium and calcium.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the basic character, solubility and thermal stability trends of group 2 oxides, hydroxides, carbonates and sulphates.
  • Describe the structure of beryllium chloride in the solid and vapour states.
  • Write the equations for making and using quick lime and slaked lime, and do mass calculations on them.
  • Explain how gypsum becomes plaster of Paris and dead burnt plaster, and give the biological role of Mg²⁺ and Ca²⁺.

Group 2 compounds are mostly ionic, though less ionic than the matching group 1 compounds, because the M²⁺ ions are smaller and more highly charged. Limestone, lime, cement and plaster of Paris are among the most used materials in building.

Oxides and hydroxides

Heating the metals in oxygen gives the monoxides MO. BeO is covalent and amphoteric; BeO and MgO are almost insoluble in water; MgO is weakly basic; CaO, SrO and BaO are strongly basic and react with water to form hydroxides, MO + H₂O → M(OH)₂. All except beryllium also form peroxides, made by heating the monoxide in oxygen, for example 2BaO + O₂ → 2BaO₂.

The hydroxides are only sparingly soluble. Their solubility, thermal stability and basic character increase down the group, but they are less basic and less stable than group 1 hydroxides. Be(OH)₂ is amphoteric: Be(OH)₂ + 2NaOH → Na₂BeO₂ + 2H₂O and Be(OH)₂ + 2HCl → BeCl₂ + 2H₂O.

Halides

The halides MX₂ are made by heating the metal with the halogen. Beryllium halides are covalent, hygroscopic, fume in moist air and dissolve in organic solvents. Solid BeCl₂ is a polymeric chain of Be atoms linked by chloride bridges; in the vapour it forms a chloride-bridged dimer, which breaks into the linear monomer Cl–Be–Cl at about 1200 K. The other group 2 halides are ionic and conduct when molten or dissolved. The tendency to form hydrates falls down the group: MgCl₂·8H₂O, CaCl₂·6H₂O, SrCl₂·6H₂O, BaCl₂·2H₂O (formulas as given in the textbook).

Carbonates, sulphates and nitrates

  • Carbonates all decompose on heating: MCO₃ → MO + CO₂. Their solubility in water decreases down the group, but their thermal stability increases as the cation gets bigger and polarises the carbonate ion less.
  • Sulphates are white solids, stable to heat. BeSO₄ and MgSO₄ dissolve readily, because the high hydration enthalpies of Be²⁺ and Mg²⁺ outweigh the lattice enthalpy; solubility falls from CaSO₄ to BaSO₄.
  • Nitrates are made by dissolving the carbonates in dilute nitric acid. Magnesium nitrate crystallises with six water molecules, barium nitrate as the anhydrous salt (fewer hydrates for bigger ions). All decompose on heating to the oxide.
Decomposition temperatures given in the Tamil Nadu textbook (°C)
ElementCarbonateSulphate
Be25500
Mg540895
Ca9001149
Sr12901374
Ba1360not given

Quick lime, CaO

Quick lime is made by heating limestone in a lime kiln at 1070–1270 K: CaCO₃ ⇌ CaO + CO₂. The reaction is reversible, so the carbon dioxide is removed as soon as it forms, which pulls the reaction to completion (Le Chatelier's principle). CaO is a white amorphous solid (m.p. 2870 K). It absorbs moisture and CO₂ from air: CaO + H₂O → Ca(OH)₂ and CaO + CO₂ → CaCO₃. Adding a limited amount of water breaks lumps of lime with much heat: this is slaking, and the product is slaked lime. A mixture of CaO and NaOH is soda lime. As a basic oxide it combines with acidic oxides: CaO + SiO₂ → CaSiO₃ and 6CaO + P₄O₁₀ → 2Ca₃(PO₄)₂. It is used for cement, mortar and glass, for making sodium carbonate and slaked lime, in sugar purification and as a drying agent.

Worked example 1: lime from limestone

What mass of quick lime and what volume of CO₂ at STP come from 25.0 g of pure limestone? (Ca = 40, C = 12, O = 16; 22.4 L mol⁻¹ at STP.) Working: M(CaCO₃) = 40 + 12 + 48 = 100 g mol⁻¹, so moles = 25.0 ÷ 100 = 0.250 mol. CaCO₃ → CaO + CO₂ is 1 : 1 : 1. Mass of CaO = 0.250 × 56 = 14.0 g; volume of CO₂ = 0.250 × 22.4 = 5.60 L. Check by mass: 14.0 g CaO + 0.250 × 44 = 11.0 g CO₂ = 25.0 g, as it must.

Slaked lime, Ca(OH)₂

Slaked lime is made by adding water to quick lime. It is a white powder, sparingly soluble in water: its clear solution is lime water and a suspension is milk of lime. CO₂ turns lime water milky, Ca(OH)₂ + CO₂ → CaCO₃ + H₂O; excess CO₂ dissolves the precipitate, CaCO₃ + CO₂ + H₂O → Ca(HCO₃)₂. Milk of lime and chlorine give the hypochlorite of bleaching powder: 2Ca(OH)₂ + 2Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O. Slaked lime is used in mortar, in whitewash (it is a disinfectant), in glass making, tanning, bleaching powder and sugar purification.

The lime cycle

  1. Limestone CaCO₃ Heated in a kiln
  2. Quick lime CaO CO₂ given off
  3. Slaked lime Ca(OH)₂ Water added (slaking)
  4. Mortar sets Ca(OH)₂ absorbs CO₂ from air and forms CaCO₃

Then back to step 1: Limestone CaCO₃

Each stage is a reaction from this lesson; the last product is limestone again.

Gypsum, CaSO₄·2H₂O

Gypsum beds formed when ancient seas evaporated and the dissolved minerals crystallised. Gypsum is a soft mineral (1.5 to 2 on Mohs' scale), usually white, colourless or grey, tinted by impurities. Unusually, it becomes less soluble as temperature rises (retrograde solubility). It conducts heat poorly, so it is a natural insulator used in drywall and plasterboard; its alabaster variety has long been carved by sculptors; petal-shaped crystals are called 'desert rose'. Gypsum is used to make plaster of Paris and surgical casts, as a soil conditioner that adds calcium and sulphur and removes excess sodium from salty soils, in toothpastes and shampoos as a thickener, and in Portland cement (2–3%) to slow down setting.

Plaster of Paris, CaSO₄·½H₂O

Heating gypsum to 393 K gives the hemihydrate: 2CaSO₄·2H₂O → 2CaSO₄·½H₂O + 3H₂O. Heated above 393 K it loses all its water and becomes anhydrous CaSO₄, dead burnt plaster, which no longer sets. Mixed with the right amount of water, plaster of Paris forms a plastic mass that hardens in 5 to 15 minutes as it takes water back and turns into gypsum. It is used in building, for casts that hold fractured bones still, in dentistry, in ornamental work and for casts of statues.

Gypsum CaSO₄·2H₂O → (393 K) → plaster of Paris CaSO₄·½H₂O → (above 393 K) → dead burnt plaster CaSO₄

Worked example 2: water lost in making plaster of Paris

What mass of plaster of Paris forms from 34.4 g of gypsum, and what percentage of the gypsum's mass is lost? (Ca = 40, S = 32, O = 16, H = 1.) Working: M(CaSO₄) = 40 + 32 + 64 = 136 g mol⁻¹. M(gypsum) = 136 + 2 × 18 = 172 g mol⁻¹; M(hemihydrate) = 136 + ½ × 18 = 145 g mol⁻¹. Moles of gypsum = 34.4 ÷ 172 = 0.200 mol, giving 0.200 mol hemihydrate = 0.200 × 145 = 29.0 g. Water lost = 34.4 − 29.0 = 5.4 g (= 0.200 × 1.5 × 18 = 5.4 g), so loss = 5.4 ÷ 34.4 × 100 = 15.7%. Atom check of the equation: Ca 2 = 2; S 2 = 2; O 8 + 4 = 12 and 8 + 1 + 3 = 12; H 8 = 2 + 6.

Biological importance of magnesium and calcium

According to the textbook, an adult body holds about 25 g of magnesium and 1200 g of calcium. Mg²⁺ is the co-factor of all enzymes that use ATP in phosphate transfer, is needed for DNA synthesis and stability, and helps balance electrolytes; lack of it causes convulsions and neuromuscular irritation. Chlorophyll, the green pigment of photosynthesis, contains magnesium. Calcium is a major part of bones and teeth; its level in blood is controlled by the hormones calcitonin and parathyroid hormone; it is needed for blood clotting (low calcium makes clotting slower) and for muscle contraction.

Key takeaways: down group 2, hydroxides become more soluble and basic, carbonates more stable but less soluble, sulphates less soluble. CaCO₃ → CaO → Ca(OH)₂ gives the lime used in building; gypsum at 393 K gives plaster of Paris, and above that dead burnt plaster.

Check your understanding

  1. 1. Which trend down group 2 is correct?

    1. Solubility of hydroxides decreases.
    2. Thermal stability of carbonates increases.
    3. Solubility of sulphates increases.
    4. Basic character of hydroxides decreases.
    Show answer

    Answer: B. Larger cations polarise the carbonate ion less, so the carbonates become more stable to heat down the group (BeCO₃ decomposes near room temperature, BaCO₃ only above 1300 °C). Hydroxide solubility and basicity increase, and sulphate solubility decreases, down the group.

  2. 2. Why is carbon dioxide removed continuously from a lime kiln?

    1. CO₂ is poisonous to the kiln lining.
    2. CaCO₃ ⇌ CaO + CO₂ is reversible, so removing CO₂ drives the reaction forward to completion.
    3. CO₂ reacts with the fuel and stops it burning.
    4. CO₂ would turn quick lime into slaked lime.
    Show answer

    Answer: B. If CO₂ stayed in contact with hot CaO, it would recombine to form CaCO₃. Removing a product shifts the equilibrium to the right, so more limestone decomposes.

  3. 3. Which equation for the reaction of chlorine with slaked lime is balanced?

    1. Ca(OH)₂ + Cl₂ → CaCl₂ + Ca(OCl)₂ + H₂O
    2. 2Ca(OH)₂ + Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O
    3. Ca(OH)₂ + 2Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O
    4. 2Ca(OH)₂ + 2Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O
    Show answer

    Answer: D. Check each atom in the last equation: Ca 2 = 1 + 1; O 4 = 2 + 2; H 4 = 4; Cl 4 = 2 + 2. In the other versions calcium, chlorine or oxygen does not balance.

  4. 4. What is 'dead burnt plaster'?

    1. Anhydrous calcium sulphate formed by heating gypsum above 393 K
    2. Plaster of Paris that has set with water
    3. Calcium sulphate dihydrate
    4. A mixture of quick lime and sodium hydroxide
    Show answer

    Answer: A. Heating gypsum to 393 K gives CaSO₄·½H₂O (plaster of Paris). Heating above 393 K removes all water and gives anhydrous CaSO₄, which does not set with water, so it is called dead burnt. Set plaster is gypsum again; CaO + NaOH is soda lime.

  5. 5. How much plaster of Paris (M = 145 g mol⁻¹) forms from 8.6 g of gypsum (M = 172 g mol⁻¹)?

    1. 7.25 g
    2. 14.5 g
    3. 8.6 g
    4. 6.8 g
    Show answer

    Answer: A. 2CaSO₄·2H₂O → 2CaSO₄·½H₂O + 3H₂O is 1 : 1 for calcium sulphate units. Moles of gypsum = 8.6 ÷ 172 = 0.050 mol, so plaster of Paris = 0.050 × 145 = 7.25 g. 14.5 g would need 0.100 mol of gypsum.

Privacy · Terms · Refunds · Delivery