• Practice
  • About 26 min
  • 5 practice questions

Compounds of alkali metals and the biological role of sodium and potassium

Describe the oxides, hydroxides, halides and oxo-acid salts of the alkali metals, explain the Solvay and Castner-Kellner processes, give the properties and uses of washing soda, common salt, caustic soda and baking soda, and state why Na⁺ and K⁺ matter in the body.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write equations for the reaction of oxides, peroxides and superoxides with water and compare their magnetic behaviour.
  • Explain the solubility of LiF and the stability of Li₂CO₃ compared with the other alkali metals.
  • Write the steps of the Solvay process and the Castner-Kellner cell, and do mass calculations on them.
  • List the properties and uses of sodium carbonate, sodium chloride, sodium hydroxide and sodium bicarbonate, and the roles of Na⁺ and K⁺ in cells.

Washing soda, table salt, caustic soda and baking soda are among the most used chemicals in homes and industries. All are sodium compounds, and almost all alkali metal compounds are ionic.

Oxides and hydroxides

Burnt in excess air the metals form the normal oxide M₂O; all except lithium also form the peroxide M₂O₂, and all except lithium and sodium also form the superoxide MO₂. Each gives a basic hydroxide with water:

  • Normal oxide: M₂O + H₂O → 2MOH
  • Peroxide: M₂O₂ + 2H₂O → 2MOH + H₂O₂ (M = Na, K, Rb, Cs)
  • Superoxide: 2MO₂ + 2H₂O → 2MOH + H₂O₂ + O₂ (M = K, Rb, Cs)

Pure oxides and peroxides are colourless; superoxides are yellow or orange. The peroxide ion O₂²⁻ has all electrons paired, so peroxides are diamagnetic; the superoxide ion O₂⁻ has one unpaired electron, so superoxides are paramagnetic. In KO₂ potassium is still +1, so each oxygen is −½. Sodium peroxide is a common oxidising agent. The hydroxides are white crystalline solids and strong bases, and they dissolve in water with much heat because of strong hydration.

Halides and salts of oxo-acids

The halides MX are colourless, high-melting crystalline solids, made by treating the oxide, hydroxide or carbonate with the acid HX. They are ionic, except LiBr and LiI, which have covalent character and dissolve in organic solvents. All are water-soluble except LiF, whose lattice enthalpy is very high because both Li⁺ and F⁻ are small.

Alkali metal salts of oxo-acids are mostly soluble and thermally stable. The carbonates M₂CO₃ are stable up to about 1273 K, then melt and finally decompose to oxides. Li₂CO₃ is the exception: it decomposes readily, Li₂CO₃ → Li₂O + CO₂, because the small Li⁺ and the large carbonate ion do not form a stable lattice. All except lithium form solid bicarbonates, M₂CO₃ + CO₂ + H₂O → 2MHCO₃; no other metals form solid bicarbonates. Down the group the solubility of carbonates and bicarbonates rises, because lattice enthalpy falls faster than hydration enthalpy.

Sodium carbonate (washing soda) by the Solvay process

Carbon dioxide is passed into brine (sodium chloride solution) saturated with ammonia. Ammonium bicarbonate forms and reacts with sodium chloride; sodium bicarbonate, being only slightly soluble, crystallises out and is heated to give sodium carbonate.

  1. 2NH₃ + H₂O + CO₂ → (NH₄)₂CO₃
  2. (NH₄)₂CO₃ + H₂O + CO₂ → 2NH₄HCO₃
  3. NH₄HCO₃ + NaCl → NH₄Cl + NaHCO₃ (precipitates)
  4. 2NaHCO₃ → Na₂CO₃ + CO₂ + H₂O (on heating)
  5. Ammonia recovery: 2NH₄Cl + Ca(OH)₂ → CaCl₂ + 2NH₃ + 2H₂O (calcium chloride is the by-product)

Solvay process in four stages

  1. Brine saturated with NH₃ Ammonia dissolves in the salt solution
  2. CO₂ passed in Ammonium carbonate, then ammonium bicarbonate
  3. NaHCO₃ precipitates Least soluble product, filtered off
  4. NaHCO₃ heated Gives Na₂CO₃; the CO₂ is reused

Washing soda crystallises as the white decahydrate Na₂CO₃·10H₂O; its solution is alkaline. On heating it loses nine water molecules to give the monohydrate, which becomes anhydrous soda ash above 373 K: Na₂CO₃·10H₂O → Na₂CO₃·H₂O + 9H₂O, then Na₂CO₃·H₂O → Na₂CO₃ + H₂O. It is used for laundering, for softening hard water and in making glass, paper and paint. Potassium carbonate cannot be made this way, because potassium bicarbonate is too soluble to precipitate.

Worked example 1: soda ash from sodium bicarbonate

What mass of Na₂CO₃ is obtained by heating 16.8 g of NaHCO₃? (Na = 23, H = 1, C = 12, O = 16.) Working: M(NaHCO₃) = 23 + 1 + 12 + 48 = 84 g mol⁻¹, so moles = 16.8 ÷ 84 = 0.200 mol. 2NaHCO₃ → Na₂CO₃ + CO₂ + H₂O gives 0.200 ÷ 2 = 0.100 mol Na₂CO₃. M(Na₂CO₃) = 46 + 12 + 48 = 106 g mol⁻¹, so mass = 0.100 × 106 = 10.6 g. Atom check: left Na 2, H 2, C 2, O 6; right Na 2, C 1 + 1 = 2, O 3 + 2 + 1 = 6, H 2.

Worked example 2: heating washing soda

28.6 g of Na₂CO₃·10H₂O is heated until it becomes the monohydrate. What mass of water is lost? Working: M = 106 + 10 × 18 = 286 g mol⁻¹, so 28.6 g = 0.100 mol. Each mole loses 9 mol water: 0.100 × 9 × 18 = 16.2 g lost, leaving 28.6 − 16.2 = 12.4 g, which matches 0.100 mol of Na₂CO₃·H₂O (M = 124 g mol⁻¹).

Sodium chloride, sodium hydroxide and sodium bicarbonate

Sodium chloride is obtained by evaporating sea water (which, according to the textbook, contains 2.7 to 2.9% salt by mass). Crude salt contains sodium sulphate, calcium sulphate, calcium chloride and magnesium chloride. To purify it, insoluble matter is filtered from a concentrated solution and HCl gas is passed in: pure NaCl crystallises, while the more soluble calcium and magnesium chlorides stay dissolved. It melts at 1081 K, its solubility hardly changes with temperature, and besides being table salt it is the raw material for NaOH and Na₂CO₃.

Sodium hydroxide is made by electrolysing brine in the Castner-Kellner cell, with a mercury cathode and a carbon anode. At the cathode Na⁺ + e⁻ → Na (amalgam); at the anode Cl⁻ → ½Cl₂ + e⁻. The sodium amalgam is then treated with water: 2Na(amalgam) + 2H₂O → 2NaOH + 2Hg + H₂. NaOH is a white, translucent, deliquescent solid (m.p. 591 K) that gives a strongly alkaline solution and slowly absorbs CO₂ from air to form Na₂CO₃. It is used to purify bauxite, in petroleum refining, for mercerising cotton and in making soap, paper and artificial silk.

Sodium bicarbonate (baking soda) is made by saturating sodium carbonate solution with CO₂: Na₂CO₃ + CO₂ + H₂O → 2NaHCO₃, which precipitates. On heating it releases CO₂ bubbles that make cakes light. It is also a mild antiseptic for skin infections and is used in fire extinguishers.

Overall Castner-Kellner change: 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂ (sodium hydroxide, chlorine and hydrogen from brine).

Biological importance of sodium and potassium

Na⁺ and K⁺ are present in large amounts in body fluids; the textbook notes that a 70 kg man contains about 90 g of sodium and 170 g of potassium, compared with about 5 g of iron. Na⁺ is found mainly outside cells, in blood plasma and the fluid around cells; it helps carry nerve signals, controls the flow of water across cell membranes and helps transport sugars and amino acids into cells. K⁺ is the main cation inside cells, where it activates many enzymes and takes part in oxidising glucose to make ATP. Although chemically similar, the two ions differ in how they cross membranes, and the sodium–potassium pump keeps them on opposite sides, which is essential for nerve impulses.

Key takeaways: peroxides are diamagnetic and superoxides paramagnetic; LiF is sparingly soluble and Li₂CO₃ unstable because Li⁺ is so small. Na₂CO₃ comes from the Solvay process, NaOH from the Castner-Kellner cell. Na⁺ works outside cells, K⁺ inside.

Check your understanding

  1. 1. Which statement about KO₂ is correct?

    1. It is a peroxide and diamagnetic.
    2. It is a superoxide and paramagnetic.
    3. It is a superoxide and diamagnetic.
    4. Potassium is in the +2 oxidation state in it.
    Show answer

    Answer: B. KO₂ contains K⁺ and the superoxide ion O₂⁻. With potassium at +1, the O₂ unit carries −1, so each O is −½. O₂⁻ has one unpaired electron, so KO₂ is paramagnetic.

  2. 2. Why cannot potassium carbonate be made by the Solvay process?

    1. Potassium chloride does not dissolve in water.
    2. Potassium bicarbonate is too soluble to precipitate from the solution.
    3. Potassium carbonate decomposes at room temperature.
    4. Ammonia does not dissolve in potassium chloride solution.
    Show answer

    Answer: B. The Solvay process works because NaHCO₃ is only slightly soluble and crystallises out. KHCO₃ is much more soluble, so it stays in solution and cannot be separated in the same way.

  3. 3. In the Castner-Kellner cell, what is formed at the mercury cathode?

    1. Chlorine gas
    2. Oxygen gas
    3. Sodium amalgam
    4. Sodium hydroxide directly
    Show answer

    Answer: C. At the mercury cathode, Na⁺ + e⁻ → Na, and the sodium dissolves in mercury as sodium amalgam. Chlorine is released at the carbon anode. NaOH forms later, when the amalgam reacts with water.

  4. 4. 117 g of sodium chloride is fully converted by the overall reaction 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂. What mass of NaOH forms? (Na = 23, Cl = 35.5, O = 16, H = 1)

    1. 40 g
    2. 117 g
    3. 160 g
    4. 80 g
    Show answer

    Answer: D. M(NaCl) = 58.5 g mol⁻¹, so 117 g = 2.0 mol. The equation gives 2 mol NaOH from 2 mol NaCl, so 2.0 mol NaOH = 2.0 × 40 = 80 g. 40 g would be only one mole.

  5. 5. Which ion is the main cation inside cells and activates many enzymes?

    1. K⁺
    2. Na⁺
    3. Mg²⁺
    4. Li⁺
    Show answer

    Answer: A. Potassium ions are the most abundant cations in the fluid inside cells, where they activate enzymes and help in the oxidation of glucose to ATP. Sodium ions are mainly outside cells.

Privacy · Terms · Refunds · Delivery