Revision notes

Unit 5 Alkali and Alkaline Earth Metals: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

s-block elements and the general characteristics of alkali metals

Electronic configuration of the alkali metals
ElementSymbolAtomic numberConfiguration
LithiumLi3[He] 2s¹
SodiumNa11[Ne] 3s¹
PotassiumK19[Ar] 4s¹
RubidiumRb37[Kr] 5s¹
CaesiumCs55[Xe] 6s¹
FranciumFr87[Rn] 7s¹

Group 1: valence configuration ns¹, one oxidation state (+1), first ionisation enthalpy low, second ionisation enthalpy very high.

Why reactivity rises from lithium to caesium

  1. A new shell is added Atomic radius increases down the group
  2. More inner-shell screening The nucleus holds the ns¹ electron less tightly
  3. Ionisation enthalpy falls Less energy is needed to form M⁺
  4. Metal loses its electron more easily Reactivity and electropositive character increase
Flame colours of alkali metal salts (wavelengths as given in the Tamil Nadu textbook)
ElementFlame colourWavelength (nm)
LithiumCrimson red670.8
SodiumYellow589.2
PotassiumLilac (violet)766.5
RubidiumReddish violet780.0
CaesiumBlue455.5

Key takeaways: the s-block is groups 1 and 2. Alkali metals are ns¹, always +1, have the largest atoms and lowest ionisation enthalpies in their periods. Down the group radius rises, while ionisation enthalpy, hydration enthalpy and electronegativity fall. Flame colours come from excited electrons returning to their normal level.

Read the full lesson

Lesson 2

Lithium's distinctive behaviour and the chemical properties of alkali metals

Lithium compared with the other alkali metals
LithiumOther alkali metals
Harder, with higher melting and boiling pointsSoft, with lower melting and boiling points
Least reactive; burns to the normal oxide Li₂O and forms a peroxide only with great difficultyMore reactive; form peroxides and (K, Rb, Cs) superoxides
Combines with nitrogen: 6Li + N₂ → 2Li₃NDo not react with nitrogen
Reacts slowly with bromineReact violently
Combines directly with carbon: 2Li + 2C → Li₂C₂Do not combine with carbon directly; acetylene gives acetylides, 2Na + C₂H₂ → Na₂C₂ + H₂
Nitrate decomposes to the oxide: 4LiNO₃ → 2Li₂O + 4NO₂ + O₂Nitrates decompose to nitrites: 2NaNO₃ → 2NaNO₂ + O₂

Lithium and magnesium: shared properties

  • Lithium
    • Harder than other group 1 metals
    • Forms Li₃N directly with nitrogen
    • Burns to Li₂O only, no superoxide
    • Li₂CO₃ decomposes on heating to Li₂O + CO₂
    • No solid bicarbonate
    • LiCl is deliquescent, dissolves in ethanol, crystallises as LiCl·2H₂O
  • Magnesium
    • Harder than other group 2 metals
    • Forms Mg₃N₂ directly with nitrogen
    • Burns to MgO only, no superoxide
    • MgCO₃ decomposes on heating to MgO + CO₂
    • No solid bicarbonate
    • MgCl₂ is deliquescent, dissolves in ethanol, crystallises as a hydrate

Blue colour and paramagnetism of a dilute alkali metal–ammonia solution are both due to the ammoniated electron.

Key takeaways: lithium is small, strongly polarising and highly hydrated, so it resembles magnesium (diagonal relationship). Alkali metals form oxides (Li₂O, Na₂O₂, KO₂), hydrides, halides and hydroxides, and dissolve in liquid ammonia to give blue, paramagnetic solutions of ammoniated electrons.

Read the full lesson

Lesson 3

Compounds of alkali metals and the biological role of sodium and potassium

Solvay process in four stages

  1. Brine saturated with NH₃ Ammonia dissolves in the salt solution
  2. CO₂ passed in Ammonium carbonate, then ammonium bicarbonate
  3. NaHCO₃ precipitates Least soluble product, filtered off
  4. NaHCO₃ heated Gives Na₂CO₃; the CO₂ is reused

Overall Castner-Kellner change: 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂ (sodium hydroxide, chlorine and hydrogen from brine).

Key takeaways: peroxides are diamagnetic and superoxides paramagnetic; LiF is sparingly soluble and Li₂CO₃ unstable because Li⁺ is so small. Na₂CO₃ comes from the Solvay process, NaOH from the Castner-Kellner cell. Na⁺ works outside cells, K⁺ inside.

Read the full lesson

Lesson 4

Alkaline earth metals: properties, beryllium's behaviour and uses

Electronic configuration of group 2
ElementAtomic numberConfiguration
Be4[He] 2s²
Mg12[Ne] 3s²
Ca20[Ar] 4s²
Sr38[Kr] 5s²
Ba56[Xe] 6s²
Ra88[Rn] 7s²
Flame colours of group 2 salts (wavelengths as given in the Tamil Nadu textbook)
ElementFlame colourWavelength (nm)
CalciumBrick red622
StrontiumCrimson red689
BariumApple green554
Beryllium compared with the other group 2 elements
BerylliumOther group 2 elements
Forms covalent compoundsForm ionic compounds
High melting and boiling pointsLower melting and boiling points
Does not react with water even when heatedReact with water
Does not combine directly with hydrogenCombine directly with hydrogen
Halides are covalentHalides are ionic
Oxide and hydroxide are amphotericOxides and hydroxides are basic
Not readily attacked by acids (protective oxide film)Readily attacked by acids
Carbide gives methane with waterCarbides (such as CaC₂) give acetylene
Salts are extensively hydrolysedSalts are hydrolysed less

Ways beryllium resembles aluminium

  • Chlorides
    • BeCl₂ and AlCl₃ form chloride-bridged dimers
    • Soluble in organic solvents
    • Strong Lewis acids
  • Hydroxides
    • Both amphoteric
    • Dissolve in excess alkali: [Be(OH)₄]²⁻ and [Al(OH)₄]⁻
  • Complexes
    • Strong tendency to form complexes such as [BeF₄]²⁻ and [AlF₆]³⁻
  • Carbides and acids
    • Be₂C and Al₄C₃ give methane with water
    • Both made passive by nitric acid

Key takeaways: group 2 elements are ns², +2, smaller and harder to ionise first than group 1, but easier to ionise a second time. Beryllium is covalent, amphoteric and unreactive with water, and resembles aluminium diagonally.

Read the full lesson

Lesson 5

Compounds of alkaline earth metals: lime, slaked lime, gypsum and plaster of Paris

Decomposition temperatures given in the Tamil Nadu textbook (°C)
ElementCarbonateSulphate
Be25500
Mg540895
Ca9001149
Sr12901374
Ba1360not given

The lime cycle

  1. Limestone CaCO₃ Heated in a kiln
  2. Quick lime CaO CO₂ given off
  3. Slaked lime Ca(OH)₂ Water added (slaking)
  4. Mortar sets Ca(OH)₂ absorbs CO₂ from air and forms CaCO₃

Then back to step 1: Limestone CaCO₃

Each stage is a reaction from this lesson; the last product is limestone again.

Gypsum CaSO₄·2H₂O → (393 K) → plaster of Paris CaSO₄·½H₂O → (above 393 K) → dead burnt plaster CaSO₄

Key takeaways: down group 2, hydroxides become more soluble and basic, carbonates more stable but less soluble, sulphates less soluble. CaCO₃ → CaO → Ca(OH)₂ gives the lime used in building; gypsum at 393 K gives plaster of Paris, and above that dead burnt plaster.

Read the full lesson

Privacy · Terms · Refunds · Delivery