• Practice
  • About 24 min
  • 5 practice questions

Enthalpy, heat capacities and calorimetry

Define enthalpy, show that ΔH equals the heat at constant pressure, relate ΔH and ΔU through Δn(g)RT, use Cp and Cv with Cp − Cv = R, and calculate ΔU and ΔH from bomb and coffee-cup calorimeter readings.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define enthalpy H = U + PV and show that ΔH = q_p.
  • Use ΔH = ΔU + Δn(g)RT for reactions involving gases.
  • Define Cp and Cv, prove Cp − Cv = R for an ideal gas and use ΔU = nCvΔT and ΔH = nCpΔT.
  • Explain how a bomb calorimeter measures ΔU and a coffee-cup calorimeter measures ΔH.

Most reactions in the laboratory happen in open vessels at the constant pressure of the atmosphere, not in sealed containers. A quantity that directly gives the heat at constant pressure is therefore very useful: that quantity is enthalpy.

Enthalpy

Enthalpy is defined as H = U + PV. Since U, P and V are state functions, H is also a state function, and it is extensive. For a change at constant pressure, ΔH = ΔU + PΔV. Using the first law with w = −PΔV: ΔU = q_p − PΔV, so ΔH = q_p − PΔV + PΔV = q_p. The enthalpy change is the heat absorbed at constant pressure (when only expansion work is done). For an endothermic change q_p > 0, so ΔH is positive; for an exothermic change ΔH is negative.

ΔH and ΔU for reactions of gases

For gases at constant T and P, PVᵢ = nᵢRT for the reactants and PV_f = n_fRT for the products, so PΔV = (n_f − nᵢ)RT = Δn(g)RT, where Δn(g) = moles of gaseous products − moles of gaseous reactants. Liquids and solids are ignored, because their volumes are tiny.

ΔH = ΔU + Δn(g)RT, with Δn(g) = (moles of gaseous products) − (moles of gaseous reactants).

Worked example 1: ΔU for the ammonia synthesis

For N₂(g) + 3H₂(g) → 2NH₃(g), ΔH = −92.4 kJ at 298 K. Find ΔU. Working: Δn(g) = 2 − (1 + 3) = −2. Δn(g)RT = −2 × 8.314 × 10⁻³ kJ K⁻¹ mol⁻¹ × 298 K = −4.96 kJ. ΔU = ΔH − Δn(g)RT = −92.4 − (−4.96) = −87.4 kJ. ΔU is less negative because at constant pressure the surroundings do work on the shrinking gas, and that energy also leaves as heat.

Heat capacities

The heat q needed to raise the temperature of a mass m by ΔT is q = c m ΔT, where c is the specific heat capacity (heat to raise 1 kg, or 1 g, by 1 K). The molar heat capacity is the heat to raise 1 mol by 1 K (J K⁻¹ mol⁻¹). At constant volume all the heat goes into internal energy, so Cv = (∂U/∂T)ᵥ; at constant pressure, Cp = (∂H/∂T)ₚ.

For an ideal gas, H = U + PV = U + nRT. Differentiating with respect to T: dH/dT = dU/dT + nR, so Cp = Cv + nR, and for one mole Cp − Cv = R. Cp is larger because, at constant pressure, part of the heat is spent pushing back the surroundings. For a finite change of n moles: ΔU = nCvΔT and ΔH = nCpΔT.

Worked example 2: heating nitrogen

2.0 mol of nitrogen is heated from 300 K to 400 K. Take Cv = 20.8 and Cp = 29.1 J K⁻¹ mol⁻¹. Working: ΔU = nCvΔT = 2.0 × 20.8 × 100 = 4160 J; ΔH = nCpΔT = 2.0 × 29.1 × 100 = 5820 J. Check: ΔH − ΔU = 1660 J, while nRΔT = 2.0 × 8.314 × 100 = 1663 J, which agrees within rounding because Cp − Cv = 8.3 ≈ R.

Calorimetry

Two calorimeters

  • Bomb calorimeter
    • Sealed steel bomb filled with oxygen at high pressure
    • Sample ignited electrically; bomb sits in stirred water
    • Volume constant, so it measures ΔU (q_v)
    • Heat = (calorimeter constant + heat capacity of water) × ΔT
    • Used for fuels, foods and explosives
  • Coffee-cup calorimeter
    • Nested insulated (styrofoam) cups with lid, stirrer and thermometer
    • Open to the atmosphere, so pressure constant
    • Measures ΔH (q_p) directly
    • Heat = mass × specific heat × ΔT of the solution
    • Used for neutralisation and dissolving

A bomb calorimeter is first calibrated by burning a known mass of a standard such as benzoic acid, whose heat of combustion is known (−3227 kJ mol⁻¹, as given in the textbook). Then, for an unknown sample, heat released = (heat capacity of calorimeter + water) × ΔT. ΔH is then found from ΔH = ΔU + Δn(g)RT.

Worked example 3: from ΔU to ΔH for ethylene

In a bomb calorimeter the combustion C₂H₄(g) + 3O₂(g) → 2CO₂(g) + 2H₂O(l) gives ΔU = −1406 kJ mol⁻¹ at 300 K. Find ΔH. Working: gaseous moles: products 2 (water is liquid), reactants 1 + 3 = 4, so Δn(g) = −2. Δn(g)RT = −2 × 8.314 × 10⁻³ × 300 = −4.99 kJ. ΔH = −1406 + (−4.99) = −1411 kJ mol⁻¹.

Worked example 4: a coffee-cup neutralisation (made-up data)

50 mL of 1.0 M HCl and 50 mL of 1.0 M NaOH, both at the same temperature, are mixed in a coffee-cup calorimeter and the temperature rises by 6.8 K. Take the solution as 100 g with specific heat 4.18 J g⁻¹ K⁻¹. Working: heat released q = 100 × 4.18 × 6.8 = 2842 J. Moles of water formed = 0.050 L × 1.0 mol L⁻¹ = 0.050 mol. Per mole: 2842 ÷ 0.050 = 56,840 J = 56.8 kJ. The reaction gives out heat, so ΔH ≈ −56.8 kJ mol⁻¹, close to the accepted −57.3 kJ mol⁻¹.

Key takeaways: H = U + PV and ΔH = q_p. ΔH = ΔU + Δn(g)RT, counting gases only. Cp − Cv = R for an ideal gas; ΔU = nCvΔT, ΔH = nCpΔT. A bomb calorimeter gives ΔU, a coffee-cup calorimeter gives ΔH.

Check your understanding

  1. 1. For which reaction is ΔH equal to ΔU?

    1. H₂(g) + I₂(g) → 2HI(g)
    2. N₂(g) + 3H₂(g) → 2NH₃(g)
    3. PCl₅(g) → PCl₃(g) + Cl₂(g)
    4. 2SO₂(g) + O₂(g) → 2SO₃(g)
    Show answer

    Answer: A. ΔH = ΔU when Δn(g) = 0. For H₂ + I₂ → 2HI, gaseous moles are 2 on each side. The other reactions have Δn(g) = −2, +1 and −1.

  2. 2. The heat of combustion of benzene at constant volume, C₆H₆(l) + 7½O₂(g) → 6CO₂(g) + 3H₂O(l), is −3268.1 kJ mol⁻¹ at 298 K. What is ΔH? (R = 8.314 × 10⁻³ kJ K⁻¹ mol⁻¹)

    1. −3264.4 kJ mol⁻¹
    2. −3268.1 kJ mol⁻¹
    3. −3271.8 kJ mol⁻¹
    4. −3275.5 kJ mol⁻¹
    Show answer

    Answer: C. Δn(g) = 6 − 7.5 = −1.5 (benzene and water are liquids). Δn(g)RT = −1.5 × 8.314 × 10⁻³ × 298 = −3.72 kJ. ΔH = −3268.1 − 3.72 = −3271.8 kJ mol⁻¹.

  3. 3. Why is Cp greater than Cv for a gas?

    1. At constant pressure some of the heat is used to do expansion work against the surroundings.
    2. At constant volume the gas loses heat to the walls.
    3. Gases have more molecules at constant pressure.
    4. Internal energy is larger at constant pressure.
    Show answer

    Answer: A. At constant volume all the heat raises internal energy. At constant pressure the gas also expands and pushes back the atmosphere, so more heat is needed for the same temperature rise. For an ideal gas the extra is R per mole per kelvin.

  4. 4. 128 g of oxygen is heated from 0 °C to 100 °C. Taking Cv = 21 J K⁻¹ mol⁻¹, what is ΔU? (O = 16)

    1. 2.1 kJ
    2. 8.4 kJ
    3. 11.6 kJ
    4. 268.8 kJ
    Show answer

    Answer: B. n = 128 ÷ 32 = 4.0 mol of O₂. ΔT = 100 K (the same in kelvin and Celsius). ΔU = nCvΔT = 4.0 × 21 × 100 = 8400 J = 8.4 kJ. Using n = 1 gives 2.1 kJ.

  5. 5. A bomb calorimeter has a total heat capacity (calorimeter plus water) of 10.0 kJ K⁻¹. Burning 0.50 g of a fuel raises its temperature by 2.0 K. What is the heat released per gram of fuel?

    1. 10 kJ g⁻¹
    2. 20 kJ g⁻¹
    3. 2.5 kJ g⁻¹
    4. 40 kJ g⁻¹
    Show answer

    Answer: D. Heat absorbed by the calorimeter = 10.0 kJ K⁻¹ × 2.0 K = 20.0 kJ. This came from 0.50 g, so per gram: 20.0 ÷ 0.50 = 40 kJ g⁻¹ (at constant volume). 20 kJ is the total, not per gram.

Privacy · Terms · Refunds · Delivery