- Practice
- About 28 min
- 5 practice questions
Entropy, the second and third laws and Gibbs free energy
Explain spontaneity, state the second law in its entropy, Kelvin-Planck and Clausius forms, calculate Carnot efficiency and entropy changes, use ΔG = ΔH − TΔS to predict spontaneity, relate ΔG° to the equilibrium constant and state the third law.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why the first law cannot predict the direction of a change, and state the second law in three ways.
- Calculate the maximum efficiency of a heat engine, η = 1 − T_c/T_h.
- Calculate entropy changes for phase changes (ΔS = ΔH/T) and for reactions from standard entropies.
- Use ΔG = ΔH − TΔS and ΔG° = −2.303 RT log K to predict spontaneity, and state the third law.
A cup of hot tea cools down by itself; it never warms up by itself, even though either change would conserve energy. Salt solution never turns back into hydrochloric acid and sodium hydroxide on its own. The first law allows both directions; the second law tells us which way a change goes naturally. A spontaneous process is one that occurs under given conditions without any outside driving force: water running downhill, sugar dissolving in tea, heat flowing from hot to cold, a gas expanding into a vacuum.
Entropy and the second law
Entropy (S) is a state function that measures the molecular disorder (randomness) of a system. Its change is defined by dS = dq_rev/T; its unit is J K⁻¹ (J K⁻¹ mol⁻¹ for molar entropy). Melting and evaporation increase entropy: molecules in ice are fixed in a crystal, move more freely in water and most freely as vapour, so S(solid) < S(liquid) < S(gas).
- Entropy statement: the entropy of an isolated system increases in a spontaneous process: ΔS(total) = ΔS(system) + ΔS(surroundings) > 0. For a reversible process at equilibrium, such as ice melting at 0 °C, ΔS(total) = 0.
- Kelvin-Planck statement: no engine working in a cycle can take heat from a hot source and turn it completely into work; some heat must be passed to a cold sink.
- Clausius statement: heat cannot be transferred from a cold body to a hot body without doing work on the system (as a refrigerator does).
Carnot showed that the maximum efficiency of a reversible heat engine depends only on the hot and cold temperatures. Efficiency η = work done ÷ heat taken in = (q_h − q_c)/q_h = 1 − q_c/q_h. For a reversible cycle ΔS(total) = 0, so q_h/T_h = q_c/T_c, giving q_c/q_h = T_c/T_h.
Maximum (Carnot) efficiency: η = 1 − T_c/T_h = (T_h − T_c)/T_h, with temperatures in kelvin; η is always less than 1.
Worked example 1: efficiency of an engine
An engine works between 227 °C and 27 °C. Find its maximum efficiency. Working: T_h = 227 + 273 = 500 K; T_c = 27 + 273 = 300 K. η = 1 − 300/500 = 1 − 0.60 = 0.40, so the maximum efficiency is 40%. Even a perfect, frictionless engine wastes 60% of the heat to the cold sink.
Entropy changes
A phase change at its transition temperature happens reversibly, with both phases in equilibrium, so ΔS = ΔH/T: ΔS_fus = ΔH_fus/T_f, ΔS_vap = ΔH_vap/T_b and ΔS_trans = ΔH_trans/T_t. For a reaction, from standard (absolute) entropies S° at 298 K and 1 bar: ΔS°ᵣ = ΣS°(products) − ΣS°(reactants). Unlike ΔH°f, the S° of an element is not zero at 298 K.
Worked example 2: entropy of fusion and vaporisation of water
Use ΔH_fus = 6008 J mol⁻¹ at 273 K and ΔH_vap = 40.63 kJ mol⁻¹ at 373 K. Working: ΔS_fus = 6008 ÷ 273 = 22.0 J K⁻¹ mol⁻¹. ΔS_vap = 40,630 ÷ 373 = 108.9 J K⁻¹ mol⁻¹. Vaporisation gives a much larger entropy increase, because a gas is far more disordered than a liquid.
Worked example 3: entropy change for ammonia synthesis
For N₂(g) + 3H₂(g) → 2NH₃(g), use S°: N₂ 191.6, H₂ 130.7, NH₃ 192.5 J K⁻¹ mol⁻¹. Working: ΣS°(products) = 2 × 192.5 = 385.0. ΣS°(reactants) = 191.6 + 3 × 130.7 = 191.6 + 392.1 = 583.7. ΔS° = 385.0 − 583.7 = −198.7 J K⁻¹ mol⁻¹. Four moles of gas become two, so disorder decreases.
Gibbs free energy
Exothermic changes are often spontaneous (burning methane, neutralisation), but some endothermic ones are too: ammonium nitrate dissolves in water spontaneously although ΔH is positive. Neither ΔH nor ΔS(system) alone decides spontaneity. J. Willard Gibbs defined the free energy G = H − TS, an extensive state function. At constant T, ΔG = ΔH − TΔS.
At constant T and P, the heat given to the surroundings is −ΔH(system), so ΔS(surroundings) = −ΔH/T. Then ΔS(total) = ΔS − ΔH/T > 0 for a spontaneous change; multiplying by −T gives ΔH − TΔS < 0. So: ΔG < 0 spontaneous; ΔG = 0 at equilibrium; ΔG > 0 non-spontaneous (the reverse change is spontaneous). −ΔG equals the maximum useful work, other than expansion work, that the system can do.
| ΔH | ΔS | ΔG = ΔH − TΔS | Example |
|---|---|---|---|
| − | + | Negative at all temperatures: always spontaneous | 2O₃(g) → 3O₂(g) |
| − | − | Negative at low T, positive at high T | Adsorption of a gas; freezing of water |
| + | + | Positive at low T, negative at high T | Melting of a solid |
| + | − | Positive at all temperatures: never spontaneous | 3O₂(g) → 2O₃(g) |
Worked example 4: is ammonia synthesis spontaneous?
ΔH° = −92.4 kJ mol⁻¹ and ΔS° = −198.7 J K⁻¹ mol⁻¹ = −0.1987 kJ K⁻¹ mol⁻¹. Working at 298 K: ΔG° = −92.4 − 298 × (−0.1987) = −92.4 + 59.2 = −33.2 kJ mol⁻¹: spontaneous. With ΔH and ΔS both negative, the reaction stops being spontaneous above T = ΔH/ΔS = 92.4 ÷ 0.1987 = 465 K (if ΔH and ΔS stay constant). Remember to put ΔH and ΔS in the same energy unit.
Free energy and the equilibrium constant
At any stage of a reaction, ΔG = ΔG° + RT ln Q, where Q is the reaction quotient. At equilibrium ΔG = 0 and Q = K, so ΔG° = −RT ln K. A large K (products favoured) means a negative ΔG°; K < 1 means a positive ΔG°.
ΔG° = −RT ln K = −2.303 RT log K, and ΔG° = ΔH° − TΔS°.
Worked example 5: K for ammonia synthesis at 298 K
Using ΔG° = −33.2 kJ mol⁻¹: log K = −ΔG°/(2.303RT) = 33,200 ÷ (2.303 × 8.314 × 298) = 33,200 ÷ 5706 = 5.82. K = 10⁵·⁸² = 6.6 × 10⁵, so at equilibrium products are strongly favoured, though the reaction is slow at 298 K: thermodynamics says nothing about rate.
Third law of thermodynamics
As a substance is cooled, its entropy falls: vapour condenses to liquid, the liquid freezes, and the crystal's vibrations slow down. The entropy of a perfectly crystalline pure substance is zero at absolute zero (lim S = 0 as T → 0). This lets us find absolute entropies, which are therefore always positive above 0 K. A crystal with defects keeps some entropy even at 0 K. A related statement: absolute zero cannot be reached in a finite number of steps; it can only be approached.
Key takeaways: spontaneous changes increase total entropy. η = 1 − T_c/T_h. ΔS = ΔH/T for phase changes; ΔS°ᵣ = ΣS°(products) − ΣS°(reactants). ΔG = ΔH − TΔS: negative means spontaneous. ΔG° = −2.303 RT log K. A perfect crystal has zero entropy at 0 K.
Check your understanding
-
1. What is the maximum efficiency of an engine working between 127 °C and 47 °C?
- 63%
- 37%
- 80%
- 20%
Show answer
Answer: D. T_h = 400 K and T_c = 320 K. η = 1 − 320/400 = 1 − 0.80 = 0.20 = 20%. Using Celsius (1 − 47/127 = 63%) is wrong; temperatures must be in kelvin.
-
2. The enthalpy of vaporisation of ethanol is 39.84 kJ mol⁻¹ at its boiling point of 351 K. What is its entropy of vaporisation?
- 113.5 J K⁻¹ mol⁻¹
- 0.1135 J K⁻¹ mol⁻¹
- 8.81 J K⁻¹ mol⁻¹
- 13,984 J K⁻¹ mol⁻¹
Show answer
Answer: A. ΔS_vap = ΔH_vap/T_b = 39,840 J mol⁻¹ ÷ 351 K = 113.5 J K⁻¹ mol⁻¹. Forgetting to change kJ to J gives 0.1135.
-
3. A reaction has ΔH = −10 kJ mol⁻¹ and ΔS = −20 J K⁻¹ mol⁻¹. Which statement is correct (ΔH and ΔS constant)?
- It is spontaneous at all temperatures.
- It is spontaneous at 300 K but not at 600 K.
- It is spontaneous at 600 K but not at 300 K.
- It is never spontaneous.
Show answer
Answer: B. At 300 K: ΔG = −10 − 300 × (−0.020) = −10 + 6 = −4 kJ mol⁻¹ (spontaneous). At 600 K: ΔG = −10 + 12 = +2 kJ mol⁻¹ (not spontaneous). The crossover is at 10 ÷ 0.020 = 500 K.
-
4. For 3/2 O₂(g) ⇌ O₃(g) at 298 K, K = 2.47 × 10⁻²⁹. What is ΔG°? (log 2.47 × 10⁻²⁹ = −28.61; R = 8.314 J K⁻¹ mol⁻¹)
- −163.2 kJ mol⁻¹
- +70.9 kJ mol⁻¹
- +163.2 kJ mol⁻¹
- +1.63 kJ mol⁻¹
Show answer
Answer: C. ΔG° = −2.303RT log K = −2.303 × 8.314 × 298 × (−28.61) = −5706 × (−28.61) = +163,200 J mol⁻¹ = +163.2 kJ mol⁻¹. The tiny K means ozone formation is strongly non-spontaneous, so ΔG° is positive.
-
5. Which statement of the third law is correct?
- The entropy of every substance is zero at 298 K.
- The entropy of a perfectly crystalline pure substance is zero at absolute zero.
- Energy can neither be created nor destroyed.
- Heat cannot flow from a cold body to a hot body.
Show answer
Answer: B. The third law fixes the zero of entropy: a perfect crystal at 0 K has S = 0. Energy conservation is the first law, and heat flow from cold to hot is the Clausius statement of the second law.
Sign in to keep track of the lessons you finish.