- Practice
- About 26 min
- 5 practice questions
Thermochemistry, Hess's law and the Born-Haber cycle
Write thermochemical equations, calculate standard enthalpies of reaction from enthalpies of formation, define enthalpies of combustion, neutralisation, solution and phase change, apply Hess's law and use a Born-Haber cycle to find a lattice enthalpy.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define standard enthalpy of formation and follow the rules for thermochemical equations.
- Calculate ΔH°ᵣ = ΣΔH°f(products) − ΣΔH°f(reactants).
- Define the enthalpies of combustion, solution, neutralisation, fusion, vaporisation, sublimation and transition.
- State Hess's law, use it to find enthalpies that cannot be measured, and calculate a lattice enthalpy with the Born-Haber cycle.
Some enthalpy changes, such as burning graphite to pure carbon monoxide or forming solid sodium chloride from gaseous ions, cannot be measured directly. Because enthalpy is a state function, they can be calculated from other, measurable values.
Standard enthalpy of formation
The standard enthalpy of formation, ΔH°f, is the enthalpy change when 1 mol of a compound is formed from its elements in their standard states (1 bar, usually at 298 K). By convention, ΔH°f of every element in its standard state (O₂(g), H₂(g), C(graphite), Na(s) ...) is zero. Examples: ½H₂(g) + ½Cl₂(g) → HCl(g), ΔH°f = −92.4 kJ mol⁻¹; 2C(s) + H₂(g) → C₂H₂(g), ΔH°f = +226.7 kJ mol⁻¹ (an endothermic compound).
| Substance | ΔH°f (kJ mol⁻¹) |
|---|---|
| H₂O(l) | −285.8 |
| H₂O(g) | −241.8 |
| CO₂(g) | −393.5 |
| CO(g) | −110.5 |
| CH₄(g) | −74.8 |
| NH₃(g) | −46.1 |
| HCl(g) | −92.4 |
| C₂H₂(g) | +226.7 (the textbook gives +222.33) |
Thermochemical equations
- The coefficients are moles of each substance, and ΔH is written with its sign and units.
- The physical states (s, l, g, aq) must be shown, because ΔH depends on them.
- Reversing an equation reverses the sign of ΔH: 2H₂(g) + O₂(g) → 2H₂O(g) has ΔH = −483.6 kJ, so 2H₂O(g) → 2H₂(g) + O₂(g) has ΔH = +483.6 kJ.
- Multiplying an equation by a number multiplies ΔH by the same number.
- A negative ΔH means exothermic; a positive ΔH means endothermic.
ΔH°ᵣ = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.
Worked example 1: combustion of methane
Find ΔH° for CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l). Working: products: (−393.5) + 2(−285.8) = −393.5 − 571.6 = −965.1 kJ. Reactants: (−74.8) + 2(0) = −74.8 kJ. ΔH° = −965.1 − (−74.8) = −890.3 kJ mol⁻¹. The equation is balanced: C 1 = 1; H 4 = 4; O 4 = 2 + 2.
Other enthalpy changes
- Enthalpy of combustion (ΔH_c): for 1 mol of a substance burnt completely in excess oxygen; always negative. For carbon (graphite) it is −393.5 kJ mol⁻¹ and for methane −890 kJ mol⁻¹. The calorific value of a fuel or food is the heat from burning 1 g (SI unit J kg⁻¹).
- Enthalpy of solution: for 1 mol of a substance dissolved in a stated amount of solvent.
- Enthalpy of neutralisation: for one gram-equivalent of acid neutralised by one gram-equivalent of base in dilute solution. For any strong acid and strong base it is about −57.3 kJ, because both are fully ionised and the only reaction is H⁺(aq) + OH⁻(aq) → H₂O(l). H₂SO₄ with 2KOH gives 2 × (−57.3) kJ.
- Enthalpy of fusion: 1 mol of solid to liquid at its melting point; for ice about +6.0 kJ mol⁻¹ at 273 K.
- Enthalpy of vaporisation: 1 mol of liquid to vapour at its boiling point; for water +40.6 kJ mol⁻¹ at 373 K.
- Enthalpy of sublimation: 1 mol of solid directly to vapour (iodine; solid CO₂).
- Enthalpy of transition: 1 mol of one allotrope to another, such as monoclinic to rhombic sulphur or white to red phosphorus.
Hess's law of constant heat summation
The enthalpy change of a reaction is the same whether it takes place in one step or in several steps, provided the initial and final states are the same. This follows because H is a state function. Thermochemical equations can therefore be added, subtracted and multiplied like algebraic equations.
Worked example 2: carbon to carbon monoxide
Find ΔH for C(graphite) + ½O₂(g) → CO(g), given (i) C(graphite) + O₂(g) → CO₂(g), ΔH = −393.5 kJ and (ii) CO(g) + ½O₂(g) → CO₂(g), ΔH = −283.0 kJ. Working: the direct route (i) must equal the two-step route C → CO → CO₂, so −393.5 = x + (−283.0), giving x = −393.5 + 283.0 = −110.5 kJ. Equivalently, (i) − (ii) gives the wanted equation.
Worked example 3: ΔH°f of methane from combustion data
Use ΔH_c: H₂ −285.8, C(graphite) −393.5, CH₄ −890.4 kJ mol⁻¹. Wanted: C(graphite) + 2H₂(g) → CH₄(g). Working: write C + O₂ → CO₂ (−393.5); 2 × [H₂ + ½O₂ → H₂O(l)] (2 × −285.8 = −571.6); and reverse the methane combustion, CO₂ + 2H₂O(l) → CH₄ + 2O₂ (+890.4). Adding, CO₂, H₂O and O₂ cancel: ΔH°f = −393.5 − 571.6 + 890.4 = −74.7 kJ mol⁻¹.
Lattice enthalpy and the Born-Haber cycle
Lattice enthalpy is the energy needed to separate 1 mol of an ionic crystal completely into its gaseous ions: NaCl(s) → Na⁺(g) + Cl⁻(g), +788 kJ mol⁻¹. The textbook writes U for the reverse step (gaseous ions → crystal), which has the same size but a negative sign. It cannot be measured directly, so the Born-Haber cycle (Max Born and Fritz Haber) uses Hess's law: forming the solid from its elements directly must equal forming it in steps.
Born-Haber steps for NaCl
- Sublime sodium Na(s) → Na(g), ΔH₁ = +108.7 kJ
- Ionise sodium Na(g) → Na⁺(g) + e⁻, ΔH₂ = +495.0 kJ
- Break half a mole of Cl₂ ½Cl₂(g) → Cl(g), ΔH₃ = ½ × 244 = +122 kJ
- Add an electron to Cl Cl(g) + e⁻ → Cl⁻(g), ΔH₄ = −349.0 kJ
- Ions form the crystal Na⁺(g) + Cl⁻(g) → NaCl(s), U = ?
Worked example 4: lattice enthalpy of NaCl
ΔH°f(NaCl) = −411.3 kJ mol⁻¹. Working: ΔH°f = ΔH₁ + ΔH₂ + ΔH₃ + ΔH₄ + U, so U = ΔH°f − (ΔH₁ + ΔH₂ + ΔH₃ + ΔH₄) = −411.3 − (108.7 + 495.0 + 122 − 349.0) = −411.3 − 376.7 = −788 kJ mol⁻¹. Energy is released when the gaseous ions come together; the lattice enthalpy (dissociation) is +788 kJ mol⁻¹.
Key takeaways: elements in standard states have ΔH°f = 0; ΔH°ᵣ = ΣΔH°f(products) − ΣΔH°f(reactants). Reverse an equation, reverse the sign; scale it, scale ΔH. Hess's law lets you add steps; the Born-Haber cycle uses it to find lattice enthalpy.
Check your understanding
-
1. Which substance has a standard enthalpy of formation of zero at 298 K?
- H₂O(l)
- O₃(g)
- C(diamond)
- O₂(g)
Show answer
Answer: D. ΔH°f is zero only for an element in its standard (most stable) state. O₂(g) is oxygen's standard state; ozone and diamond are not the most stable forms of oxygen and carbon, and water is a compound.
-
2. Using ΔH°f values CO₂(g) −393.5, CO(g) −110.5 and H₂O(g) −241.8 kJ mol⁻¹, what is ΔH° for CO₂(g) + H₂(g) → CO(g) + H₂O(g)?
- −41.2 kJ
- +41.2 kJ
- +745.8 kJ
- −524.8 kJ
Show answer
Answer: B. Products: −110.5 + (−241.8) = −352.3 kJ. Reactants: −393.5 + 0 = −393.5 kJ. ΔH° = −352.3 − (−393.5) = +41.2 kJ, an endothermic reaction.
-
3. The enthalpy of neutralisation of HNO₃ by KOH is about −57.3 kJ mol⁻¹, the same as for HCl and NaOH, because
- nitric acid and hydrochloric acid have the same molar mass
- in each case the only change is H⁺(aq) + OH⁻(aq) → H₂O(l), since strong acids and bases are fully ionised
- potassium and sodium have the same ionisation enthalpy
- neutralisation always absorbs heat
Show answer
Answer: B. Strong acids and bases are completely ionised in dilute solution, so the spectator ions (K⁺, Na⁺, NO₃⁻, Cl⁻) do nothing; the reaction is always H⁺ + OH⁻ → H₂O, with the same enthalpy change.
-
4. Given S(s) + O₂(g) → SO₂(g), ΔH = −297 kJ and 2SO₂(g) + O₂(g) → 2SO₃(g), ΔH = −198 kJ, what is ΔH for S(s) + 1½O₂(g) → SO₃(g)?
- −495 kJ
- −99 kJ
- −693 kJ
- −396 kJ
Show answer
Answer: D. Halve the second equation: SO₂ + ½O₂ → SO₃, ΔH = −99 kJ. Add it to the first: S + 1½O₂ → SO₃, ΔH = −297 + (−99) = −396 kJ. Forgetting to halve gives −495 kJ.
-
5. Use these values to find U for Na⁺(g) + Cl⁻(g) → NaCl(s): ΔH°f(NaCl) = −411 kJ, sublimation of Na = +109 kJ, ionisation of Na = +495 kJ, ½ bond enthalpy of Cl₂ = +122 kJ, electron gain by Cl = −349 kJ.
- +788 kJ
- −34 kJ
- −788 kJ
- −1486 kJ
Show answer
Answer: C. U = ΔH°f − (sum of the other steps) = −411 − (109 + 495 + 122 − 349) = −411 − 377 = −788 kJ. The sign is negative because energy is released when the ions form the crystal; +788 kJ is the reverse (lattice dissociation).
Sign in to keep track of the lessons you finish.