Revision notes

Unit 7 Thermodynamics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

System, surroundings, properties and thermodynamic processes

Three types of system

  • Open system
    • Exchanges matter and energy
    • Example: hot water in an open beaker
    • Living things are open systems
  • Closed system
    • Exchanges energy only, not matter
    • Boundary sealed but not insulated
    • Example: hot water in a stoppered flask; gas in a cylinder with a piston
  • Isolated system
    • Exchanges neither matter nor energy
    • Boundary sealed and insulated
    • Example: hot water in a closed vacuum (thermos) flask (approximately)
Extensive and intensive properties
Extensive (depends on the amount)Intensive (does not depend on the amount)
Mass, volume, number of molesDensity, molar volume, molar mass
Internal energy, enthalpyTemperature, pressure
Entropy, free energyBoiling point, freezing point, refractive index, surface tension
Heat capacitySpecific heat capacity, molarity, molality, mole fraction
Processes and their conditions
ProcessWhat is constantConditionExample
AdiabaticNo heat exchangedq = 0Gas expanding in an insulated cylinder
IsothermalTemperaturedT = 0Reaction in a thermostat
IsobaricPressuredP = 0Reaction in an open beaker
IsochoricVolumedV = 0Combustion in a sealed bomb calorimeter
CyclicSystem returns to its initial statedU = 0, dH = 0, dP = 0, dV = 0, dT = 0Working fluid of an engine over one cycle

State functions (U, H, S, G, P, V, T): change depends only on initial and final states; zero for a complete cycle. Path functions (q, w): depend on how the change is carried out.

Key takeaways: open systems exchange matter and energy, closed systems energy only, isolated systems neither. Extensive properties depend on amount, intensive ones do not. U, H, S, G are state functions; q and w are path functions. Know the condition for each process: q = 0, dT = 0, dP = 0, dV = 0, or a return to the start.

Read the full lesson

Lesson 2

Internal energy, heat, work and the first law

Sign convention used in the Tamil Nadu textbook (IUPAC)
ChangeSign
Heat absorbed by the systemq positive (+q)
Heat given out by the systemq negative (−q)
Work done on the systemw positive (+w)
Work done by the systemw negative (−w)

Irreversible (constant Pₑₓₜ): w = −PₑₓₜΔV. Reversible isothermal, ideal gas: w = −nRT ln(V_f/V_i) = −2.303 nRT log(V_f/V_i).

First law: ΔU = q + w (q = heat supplied to the system, w = work done on the system).

The first law in special processes

  • Isochoric (ΔV = 0)
    • No expansion work, w = 0
    • ΔU = q_v: all heat goes into internal energy
  • Adiabatic (q = 0)
    • ΔU = w
    • Work done by the gas lowers its internal energy and temperature
  • Isobaric (P constant)
    • ΔU = q − PΔV
    • Part of the heat does expansion work, the rest raises U
  • Cyclic, or isothermal ideal gas
    • ΔU = 0
    • q = −w: heat absorbed equals work done by the system

Key takeaways: energy into the system is positive, energy out is negative. w = −PₑₓₜΔV for a constant external pressure; reversible isothermal work is −2.303 nRT log(V_f/V_i), the largest possible. ΔU = q + w; ΔU = q_v at constant volume, ΔU = w when adiabatic, ΔU = 0 for a cycle.

Read the full lesson

Lesson 3

Enthalpy, heat capacities and calorimetry

ΔH = ΔU + Δn(g)RT, with Δn(g) = (moles of gaseous products) − (moles of gaseous reactants).

Two calorimeters

  • Bomb calorimeter
    • Sealed steel bomb filled with oxygen at high pressure
    • Sample ignited electrically; bomb sits in stirred water
    • Volume constant, so it measures ΔU (q_v)
    • Heat = (calorimeter constant + heat capacity of water) × ΔT
    • Used for fuels, foods and explosives
  • Coffee-cup calorimeter
    • Nested insulated (styrofoam) cups with lid, stirrer and thermometer
    • Open to the atmosphere, so pressure constant
    • Measures ΔH (q_p) directly
    • Heat = mass × specific heat × ΔT of the solution
    • Used for neutralisation and dissolving

Key takeaways: H = U + PV and ΔH = q_p. ΔH = ΔU + Δn(g)RT, counting gases only. Cp − Cv = R for an ideal gas; ΔU = nCvΔT, ΔH = nCpΔT. A bomb calorimeter gives ΔU, a coffee-cup calorimeter gives ΔH.

Read the full lesson

Lesson 4

Thermochemistry, Hess's law and the Born-Haber cycle

Standard enthalpies of formation at 298 K (accepted values)
SubstanceΔH°f (kJ mol⁻¹)
H₂O(l)−285.8
H₂O(g)−241.8
CO₂(g)−393.5
CO(g)−110.5
CH₄(g)−74.8
NH₃(g)−46.1
HCl(g)−92.4
C₂H₂(g)+226.7 (the textbook gives +222.33)

ΔH°ᵣ = ΣΔH°f(products) − ΣΔH°f(reactants), each multiplied by its coefficient.

Born-Haber steps for NaCl

  1. Sublime sodium Na(s) → Na(g), ΔH₁ = +108.7 kJ
  2. Ionise sodium Na(g) → Na⁺(g) + e⁻, ΔH₂ = +495.0 kJ
  3. Break half a mole of Cl₂ ½Cl₂(g) → Cl(g), ΔH₃ = ½ × 244 = +122 kJ
  4. Add an electron to Cl Cl(g) + e⁻ → Cl⁻(g), ΔH₄ = −349.0 kJ
  5. Ions form the crystal Na⁺(g) + Cl⁻(g) → NaCl(s), U = ?
The sum of all five steps equals ΔH°f of NaCl(s).

Key takeaways: elements in standard states have ΔH°f = 0; ΔH°ᵣ = ΣΔH°f(products) − ΣΔH°f(reactants). Reverse an equation, reverse the sign; scale it, scale ΔH. Hess's law lets you add steps; the Born-Haber cycle uses it to find lattice enthalpy.

Read the full lesson

Lesson 5

Entropy, the second and third laws and Gibbs free energy

Maximum (Carnot) efficiency: η = 1 − T_c/T_h = (T_h − T_c)/T_h, with temperatures in kelvin; η is always less than 1.

Effect of temperature on spontaneity (assuming ΔH and ΔS do not change with T)
ΔHΔSΔG = ΔH − TΔSExample
−+Negative at all temperatures: always spontaneous2O₃(g) → 3O₂(g)
−−Negative at low T, positive at high TAdsorption of a gas; freezing of water
++Positive at low T, negative at high TMelting of a solid
+−Positive at all temperatures: never spontaneous3O₂(g) → 2O₃(g)

ΔG° = −RT ln K = −2.303 RT log K, and ΔG° = ΔH° − TΔS°.

Key takeaways: spontaneous changes increase total entropy. η = 1 − T_c/T_h. ΔS = ΔH/T for phase changes; ΔS°ᵣ = ΣS°(products) − ΣS°(reactants). ΔG = ΔH − TΔS: negative means spontaneous. ΔG° = −2.303 RT log K. A perfect crystal has zero entropy at 0 K.

Read the full lesson

Privacy · Terms · Refunds · Delivery