- Practice
- About 18 min
- 5 practice questions
Converting scales and constructing a bar scale
Convert a statement scale into a representative fraction and back in the metric and English systems, and construct a bar scale with primary and secondary divisions.
If something looks wrong, please tell us.
By the end of this lesson you can
- Convert a statement scale into an RF in the metric and English systems.
- Convert an RF into a statement scale.
- Construct a bar scale of suitable length with primary and secondary divisions.
Scale conversions are pure unit work: once both sides are in the same unit, the ratio falls out. Learn the two conversion facts below by heart and every problem becomes three short steps.
Conversion facts
| Unit | Equals |
|---|---|
| 1 km | 1,000 m = 100,000 cm |
| 1 m | 100 cm |
| 1 mile | 63,360 inches |
Statement to RF: bring both sides to the same unit, then divide so the map side becomes 1. RF to statement: divide the denominator by 100,000 (cm to km) or 63,360 (inches to miles).
Statement scale to RF
Example A (metric): '1 cm represents 4 km'. Step 1: 4 km = 4 × 100,000 = 400,000 cm. Step 2: 1 cm : 400,000 cm. RF = 1 : 400,000.
Example B: '3 cm represents 1.5 km'. Step 1: 1.5 km = 150,000 cm. Step 2: 3 cm : 150,000 cm. Step 3: divide both by 3: 1 : 50,000. RF = 1 : 50,000. Check: 1 cm then represents 50,000 cm = 0.5 km, and 3 cm represents 1.5 km.
Example C (English): '1 inch represents 2 miles'. Step 1: 2 miles = 2 × 63,360 = 126,720 inches. RF = 1 : 126,720.
Example D: '1 cm represents 250 metres'. Step 1: 250 m = 25,000 cm. RF = 1 : 25,000.
RF to statement scale
Example E: RF 1 : 1,000,000. 1 cm represents 1,000,000 cm; ÷ 100,000 = 10 km. Statement: 1 cm represents 10 km.
Example F: RF 1 : 63,360. 1 inch represents 63,360 inches = 1 mile. Statement: 1 inch represents 1 mile. (On the same map, 1 cm represents 63,360 cm = 633.6 m.)
Example G: RF 1 : 75,000. 75,000 ÷ 100,000 = 0.75. Statement: 1 cm represents 0.75 km (750 m).
Constructing a bar scale
By convention a bar scale is drawn about 15 cm long. The method, as in the Tamil Nadu textbook, is: work out how much ground the line can show, choose a round figure, draw the line, divide it into primary divisions, write 0 at the end of the first division, and divide that first (left) division into secondary parts.
Steps to draw a bar scale
- Find ground per cm From the RF, work out what 1 cm represents.
- Choose a round length Pick a round ground distance whose line is close to 15 cm.
- Draw and divide Draw the line and mark equal primary divisions.
- Place zero Write 0 at the end of the first division; number primaries to the right.
- Secondary divisions Divide the left division into smaller units, numbered leftwards from 0.
- Label Write the units and the RF below the scale.
Worked example 1: bar scale for RF 1 : 25,000
Step 1: 1 cm represents 25,000 cm = 250 m. Step 2: 15 cm would represent 15 × 250 = 3,750 m; choose the round figure 3 km. Step 3: length = 3,000 ÷ 250 = 12 cm. Step 4: divide the 12 cm line into 3 primary divisions of 4 cm, each 1 km. Step 5: write 0 at the end of the first division; to its right mark 1 km and 2 km. Step 6: divide the first division into 10 secondary parts of 0.4 cm, each 100 m, numbered 0 to 1,000 m leftwards. Check: 4 cm × 250 m = 1,000 m per primary division.
Worked example 2: bar scale for '1 cm represents 2 km'
Step 1: 15 cm would represent 30 km, already a round figure, so the line is 15 cm. Step 2: divide it into 6 primary divisions of 2.5 cm, each representing 5 km. Step 3: 0 at the end of the first division, then 5, 10, 15, 20, 25 km to the right. Step 4: divide the first division into 5 secondary parts of 0.5 cm, each 1 km. Check: 2.5 cm × 2 km/cm = 5 km. RF = 1 : 200,000.
Key takeaways: for any conversion, bring both sides to the same unit (1 km = 100,000 cm; 1 mile = 63,360 inches) and reduce the map side to 1. A bar scale is drawn about 15 cm long for a round ground distance, divided into primary divisions with 0 after the first, and the first division split into secondary units.
Check your understanding
-
1. Convert '1 cm represents 5 km' into an RF.
- 1 : 5,000
- 1 : 500,000
- 1 : 50,000
- 1 : 5,000,000
Show answer
Answer: B. 5 km = 5 × 100,000 cm = 500,000 cm, so the RF is 1 : 500,000.
-
2. An RF of 1 : 250,000 written as a statement scale is:
- 1 cm represents 25 km
- 1 cm represents 250 m
- 1 cm represents 2.5 km
- 1 cm represents 0.25 km
Show answer
Answer: C. 250,000 cm ÷ 100,000 = 2.5 km, so 1 cm represents 2.5 km.
-
3. Convert '1 inch represents 4 miles' into an RF.
- 1 : 253,440
- 1 : 63,360
- 1 : 126,720
- 1 : 400,000
Show answer
Answer: A. 4 miles = 4 × 63,360 = 253,440 inches, so the RF is 1 : 253,440.
-
4. '2 cm represents 1 km' as an RF is:
- 1 : 100,000
- 1 : 200,000
- 1 : 20,000
- 1 : 50,000
Show answer
Answer: D. 1 km = 100,000 cm, so 2 cm : 100,000 cm. Dividing both by 2 gives 1 : 50,000.
-
5. You draw a bar scale for RF 1 : 50,000 to show 5 km. How long is the line?
- 10 cm
- 5 cm
- 15 cm
- 50 cm
Show answer
Answer: A. At 1 : 50,000, 1 cm represents 0.5 km, so 5 km needs 5 ÷ 0.5 = 10 cm.
Sign in to keep track of the lessons you finish.