• Practice
  • About 14 min
  • 5 practice questions

Scale: meaning and the three ways of showing it

Define map scale and explain the statement scale, the representative fraction and the graphical (bar) scale, with the advantages of each.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define the scale of a map.
  • Recognise a statement scale, a representative fraction (RF) and a bar scale.
  • Explain why only the bar scale stays correct when a map is enlarged or reduced.

Every measurement you take from a map depends on its scale. Before converting or drawing scales, you need to be sure what a scale is and the three forms in which the Tamil Nadu textbook presents it.

What is scale?

The scale of a map is the ratio between the distance between two points on the map and the corresponding distance on the ground. It can be written as a fraction in which the numerator is the map distance and the denominator is the ground distance. The scale lets the map user convert any distance measured on the map into the real distance on the ground.

Scale = map distance ÷ ground distance (both in the same unit).

1. Statement scale

The scale is written in words, for example '1 cm represents 10 km' or '1 inch to 16 miles'. It uses familiar units, so it is the easiest form to understand. Its weakness is that it is tied to particular units: a reader who uses another system must convert it, and if the map is photocopied larger or smaller the statement is no longer true.

2. Representative fraction (RF)

The RF shows the relationship between map distance and ground distance in the same unit, written as a fraction or ratio such as 1/40,000 or 1 : 40,000. It means 1 unit on the map represents 40,000 of the same units on the ground: 1 cm represents 40,000 cm, or 1 inch represents 40,000 inches. Because it has no units, the RF can be used with any system of measurement. The textbook notes that when the numerator is taken in centimetres, the denominator is usually converted into metres and kilometres; when it is in inches, into miles.

3. Graphical or bar scale

A straight line is drawn and divided into primary divisions (main units such as kilometres) and, at the left end, secondary divisions (smaller units such as hundreds of metres). Distances can be read off directly with a pair of dividers. The unique advantage of the bar scale is that it stays valid when the map is enlarged or reduced, because the bar itself grows or shrinks along with the map.

Three ways of showing scale

  • Statement
    • In words: 1 cm represents 5 km
    • Easiest to understand
    • Tied to one unit system
    • Wrong after enlargement or reduction
  • Representative fraction
    • Ratio: 1 : 500,000
    • No units, works in any system
    • Needs calculation to read
    • Wrong after enlargement or reduction
  • Bar scale
    • A divided line
    • Read distances directly
    • Stays correct when the map is enlarged or reduced
    • Needs care to construct

Worked example 1: reading an RF

What does an RF of 1 : 25,000 mean? Step 1: 1 cm on the map represents 25,000 cm on the ground. Step 2: 25,000 cm ÷ 100 = 250 m. Answer: 1 cm on the map represents 250 m on the ground; equally, 1 inch on the map represents 25,000 inches on the ground. Check: 250 m × 100 = 25,000 cm.

Worked example 2: why the statement fails after photocopying

A map says '1 cm represents 2 km' and has a bar scale. It is photocopied at double size. A road that measured 3 cm now measures 6 cm. Using the statement: 6 × 2 = 12 km, which is wrong. The bar scale on the copy has also doubled, so 2 km now spans 2 cm of bar, that is 1 cm stands for 1 km; reading 6 cm against the new bar gives 6 km, which is correct (the original 3 cm × 2 km = 6 km). Conclusion: after enlargement or reduction, trust only the bar scale.

Large scale and small scale

A useful idea for the coming units: the larger the denominator, the smaller the scale. 1 : 25,000 is a larger scale than 1 : 1,000,000, so it shows a small area in great detail; 1 : 1,000,000 shows a large area with little detail. Village maps and topographical sheets are large or medium scale; atlas maps of countries are small scale.

Key takeaways: scale is the ratio of map distance to ground distance. It may be shown as a statement (in words), as an RF (a unitless ratio such as 1 : 50,000) or as a bar scale (a divided line). The RF works in any unit system; the bar scale stays correct when the map is enlarged or reduced. A larger denominator means a smaller scale.

Check your understanding

  1. 1. In an RF of 1 : 50,000, the number 50,000 stands for:

    1. the map distance
    2. the ground distance in the same unit as the map distance
    3. the number of kilometres on the map
    4. the area of the map
    Show answer

    Answer: B. The numerator (1) is the map distance and the denominator (50,000) is the corresponding ground distance in the same unit.

  2. 2. Which form of scale remains correct after a map is enlarged on a photocopier?

    1. Statement scale
    2. Representative fraction
    3. Bar (graphical) scale
    4. None of them
    Show answer

    Answer: C. The bar scale is enlarged together with the map, so it still matches the map. This is its unique advantage, according to the textbook.

  3. 3. Which of these scales is the largest?

    1. 1 : 25,000
    2. 1 : 250,000
    3. 1 : 1,000,000
    4. 1 : 50,000
    Show answer

    Answer: A. The smaller the denominator, the larger the scale and the more detail shown. 25,000 is the smallest denominator.

  4. 4. Why can an RF be used by people who measure in either centimetres or inches?

    1. It is always in kilometres
    2. It is always in miles
    3. It changes with the paper size
    4. It has no units; both sides are in the same unit
    Show answer

    Answer: D. An RF is a pure ratio. 1 : 40,000 means 1 cm to 40,000 cm or 1 inch to 40,000 inches.

  5. 5. On a map of RF 1 : 20,000, 1 cm represents:

    1. 200 m
    2. 2 km
    3. 20 m
    4. 20 km
    Show answer

    Answer: A. 1 cm represents 20,000 cm. 20,000 ÷ 100 = 200 m.

Privacy · Terms · Refunds · Delivery