- Practice
- About 17 min
- 5 practice questions
Enlarging and reducing maps by the square method
Explain scale factor and the area ratio of enlarged or reduced maps, and calculate the side of the new squares when a map is enlarged or reduced to a given scale.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain enlargement, reduction and the scale factor.
- Calculate how area changes when a map's scale changes.
- Find the side of the squares for a new map and transfer the outline square by square.
Cartographers often need the same map at a different size: a district outline enlarged for a wall chart, or a state map reduced to fit a report. The Tamil Nadu textbook's method uses a network of similar squares and one formula.
Enlargement, reduction and scale factor
An enlargement gives the same map, proportionally larger than the original; a reduction gives it proportionally smaller. The constant by which every length is multiplied is the scale factor (enlargement or reduction factor). If every length is halved, the scale factor is ½; if every length is doubled, it is 2. Shapes stay the same; only size changes.
How area changes
The textbook states that the ratio between the area of a map on one scale and its area on another is equal to the square of the ratio of the scales. If lengths are doubled (factor 2), areas become 2² = 4 times larger. If lengths are halved (factor ½), areas become (½)² = ¼.
Side of new square = side of old square × (new RF ÷ old RF). Area changes by the square of the scale factor.
The square method, step by step
Enlarging or reducing a map by similar squares
- Draw squares on the original Cover the map with a network of equal squares, for example 1 cm.
- Calculate the new side New side = old side × (new RF ÷ old RF).
- Draw the new network Draw the same number of squares with the new side.
- Number rows and columns Label both networks alike so squares can be matched.
- Transfer the outline Copy what lies in each original square into the matching new square.
- Finish Ink the outline, add title, new scale and north arrow.
Worked example 1: enlarging to double the scale
A made-up district map is drawn at RF 1 : 4,000,000 with squares of side 1 cm. Enlarge it to 1 : 2,000,000. Step 1: new side = 1 cm × (1/2,000,000 ÷ 1/4,000,000) = 1 × 4,000,000 ÷ 2,000,000 = 2 cm. Step 2: draw the same number of squares with 2 cm sides and transfer the outline square by square. Scale factor = 2; the new map's area on paper is 2² = 4 times the original.
Worked example 2: reducing a map
A made-up state map at RF 1 : 500,000 has squares of side 2 cm. Reduce it to 1 : 1,000,000. Step 1: new side = 2 cm × (1/1,000,000 ÷ 1/500,000) = 2 × 500,000 ÷ 1,000,000 = 1 cm. Scale factor = ½; area on paper becomes (½)² = ¼ of the original. Check: 2 cm at 1 : 500,000 represents 10 km; 1 cm at 1 : 1,000,000 also represents 10 km, so each square still covers the same ground.
Worked example 3: a factor that is not a whole number
A map at 1 : 3,000,000 with squares of 1.5 cm is to be enlarged to 1 : 1,000,000. New side = 1.5 × 3,000,000 ÷ 1,000,000 = 4.5 cm. Check: 1.5 cm × 30 km/cm = 45 km on the original; 4.5 cm × 10 km/cm = 45 km on the new map. The ground represented by one square never changes; that is the quickest check for every problem of this kind.
Common mistakes
- Turning the fraction upside down: for an enlargement the new squares must be larger; for a reduction, smaller.
- Changing the number of squares: the new network has the same number of squares as the original.
- Forgetting to write the new scale on the new map.
Key takeaways: enlargement and reduction keep the shape and change size by a constant scale factor. Area changes by the square of that factor. New square side = old side × old RF denominator ÷ new RF denominator. Each square must represent the same ground distance on both maps.
Check your understanding
-
1. A map at 1 : 2,000,000 with 1 cm squares is enlarged to 1 : 1,000,000. What is the side of the new squares?
- 0.5 cm
- 2 cm
- 1 cm
- 4 cm
Show answer
Answer: B. New side = 1 × 2,000,000 ÷ 1,000,000 = 2 cm. An enlargement must give larger squares.
-
2. If every length on a map is tripled, its area on paper becomes:
- 3 times larger
- 6 times larger
- 9 times larger
- the same
Show answer
Answer: C. Area changes by the square of the scale factor: 3² = 9.
-
3. A map at 1 : 1,000,000 with 3 cm squares is reduced to 1 : 3,000,000. What is the side of the new squares?
- 1 cm
- 9 cm
- 3 cm
- 0.33 cm
Show answer
Answer: A. New side = 3 × 1,000,000 ÷ 3,000,000 = 1 cm. Check: 3 cm × 10 km = 30 km; 1 cm × 30 km = 30 km.
-
4. When a map is enlarged by the square method, the number of squares in the new network is:
- doubled
- halved
- always 100
- the same as on the original
Show answer
Answer: D. The textbook says the number of squares stays the same; only their size changes.
-
5. If a map is reduced so that all lengths are halved, the scale factor is:
- ½
- 2
- ¼
- 4
Show answer
Answer: A. The scale factor is the number every length is multiplied by. Halving means a factor of ½; the area factor would be ¼.
Sign in to keep track of the lessons you finish.