• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Map and Scale

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before reading any explanation. Note the ones you got wrong, then go back to the lesson named at the end. Several questions ask you to apply a method to new made-up data, so keep a pencil and rough paper ready.

Final self-assessment

  1. 1. A student's map has a title, a legend and a scale. Which two basic components named in the textbook are still missing?

    1. Contours and grid
    2. Direction and source
    3. Isobars and legend
    4. Colour and border
    Show answer

    Answer: B. The basic components are title, legend, direction, scale and source. Direction (north arrow) and source are missing.

  2. 2. Where is the north arrow conventionally placed?

    1. Bottom left corner
    2. In the legend box
    3. Top right corner
    4. Outside the frame at the bottom right
    Show answer

    Answer: C. The textbook says the arrow pointing north is placed at the top right corner of the map.

  3. 3. Which statement about the representative fraction is correct?

    1. It has no units, so it can be read in any system
    2. It must always be in kilometres
    3. It stays correct after photocopying at a larger size
    4. Its numerator is the ground distance
    Show answer

    Answer: A. The RF is a unitless ratio, with the map distance as numerator. Only the bar scale remains valid after enlargement.

  4. 4. Arrange from largest to smallest scale: 1 : 1,000,000; 1 : 25,000; 1 : 250,000.

    1. 1 : 1,000,000; 1 : 250,000; 1 : 25,000
    2. 1 : 250,000; 1 : 25,000; 1 : 1,000,000
    3. 1 : 25,000; 1 : 1,000,000; 1 : 250,000
    4. 1 : 25,000; 1 : 250,000; 1 : 1,000,000
    Show answer

    Answer: D. The smaller the denominator, the larger the scale: 25,000 < 250,000 < 1,000,000.

  5. 5. Convert '4 cm represents 1 km' into an RF.

    1. 1 : 25,000
    2. 1 : 40,000
    3. 1 : 400,000
    4. 1 : 4,000
    Show answer

    Answer: A. 1 km = 100,000 cm. 4 : 100,000 reduces (÷ 4) to 1 : 25,000.

  6. 6. Convert RF 1 : 126,720 into a statement in the English system.

    1. 1 inch represents 1 mile
    2. 1 inch represents 2 miles
    3. 1 inch represents 12 miles
    4. 1 inch represents 20 miles
    Show answer

    Answer: B. 126,720 ÷ 63,360 = 2, so 1 inch represents 2 miles.

  7. 7. For a bar scale at RF 1 : 40,000 showing 6 km, the line should be:

    1. 6 cm
    2. 24 cm
    3. 15 cm
    4. 40 cm
    Show answer

    Answer: C. 1 cm represents 40,000 cm = 0.4 km. 6 ÷ 0.4 = 15 cm, which also matches the conventional length.

  8. 8. In a bar scale, where is the 0 usually written?

    1. At the end of the first (left) primary division
    2. At the extreme right end
    3. At the extreme left end
    4. In the middle of the line
    Show answer

    Answer: A. Zero is placed at the end of the first division so that the left division can carry the secondary units and the primaries are numbered to the right.

  9. 9. On a map of RF 1 : 200,000, a winding road measured with a thread is 9.5 cm. Its length is:

    1. 9.5 km
    2. 1.9 km
    3. 95 km
    4. 19 km
    Show answer

    Answer: D. 1 cm represents 200,000 cm = 2 km. 9.5 × 2 = 19 km.

  10. 10. On 1 cm squares at a scale of 1 cm to 5 km, a lake covers 6 full squares and 4 half squares. Its area is:

    1. 40 km²
    2. 200 km²
    3. 8 km²
    4. 50 km²
    Show answer

    Answer: B. Squares = 6 + 4 × ½ = 8. Each square represents 5 × 5 = 25 km². 8 × 25 = 200 km². Using 5 km² per square (40 km²) is the common error.

  11. 11. Which is the most common method of measuring area on a map, according to the textbook?

    1. The square method
    2. The rotameter method
    3. The thread method
    4. The compass method
    Show answer

    Answer: A. The textbook calls the square method the most common method; thread and rotameter measure lengths.

  12. 12. A map at 1 : 6,000,000 with 1 cm squares is enlarged to 1 : 2,000,000. The new squares have side:

    1. 2 cm
    2. 1/3 cm
    3. 6 cm
    4. 3 cm
    Show answer

    Answer: D. New side = 1 × 6,000,000 ÷ 2,000,000 = 3 cm. Check: 1 cm × 60 km = 60 km; 3 cm × 20 km = 60 km.

  13. 13. A map is enlarged so that its scale changes from 1 : 500,000 to 1 : 250,000. Its area on paper becomes:

    1. 2 times
    2. 4 times
    3. half
    4. the same
    Show answer

    Answer: B. The scale factor is 500,000 ÷ 250,000 = 2, so area becomes 2² = 4 times.

  14. 14. What is the quickest check that new squares have been calculated correctly?

    1. The new squares must always be 2 cm
    2. The number of squares must double
    3. Each square must represent the same ground distance on both maps
    4. The title must change
    Show answer

    Answer: C. A square on the new map must cover exactly the same ground as its matching square on the original.

  15. 15. A map at 1 : 32,000,000 has squares of 0.5 cm and is enlarged to 1 : 16,000,000. What is the side of the new squares?

    1. 1 cm
    2. 2 cm
    3. 0.25 cm
    4. 4 cm
    Show answer

    Answer: A. New side = 0.5 × 32,000,000 ÷ 16,000,000 = 0.5 × 2 = 1 cm. Check: 0.5 cm × 320 km = 160 km; 1 cm × 160 km = 160 km.

Questions 1-2: lesson 1 (components). Questions 3-4: lesson 2 (types of scale). Questions 5-8: lesson 3 (conversions and bar scale). Questions 9-11: lesson 4 (distance and area). Questions 12-15: lesson 5 (enlargement and reduction).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery