• Practice
  • About 26 min
  • 5 practice questions

Dynamics of circular motion: centripetal force, banking and centrifugal force

Identify what supplies the centripetal force in different motions, find the safe speed on a level and on a banked curve, and explain the centrifugal force as a pseudo force in rotating frames, including on the rotating Earth.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write F_cp = mv²/r = mω²r and name the force that supplies it in different cases.
  • Find the centripetal acceleration of the Moon from its orbit.
  • Use the condition v ≤ √(μs r g) for a safe turn on a level road.
  • Derive v = √(r g tan θ) for a banked road.
  • Explain centrifugal force as a pseudo force, estimate it on the rotating Earth and compare it with centripetal force.

A body can move in a straight line with no force at all, but it can never move in a circle without one: there is no 'first law' for circular motion. A force can change a velocity's magnitude only (a body falling straight down), its direction only (uniform circular motion), or both (a swinging pendulum, a planet in an elliptical orbit).

Centripetal force

In uniform circular motion the acceleration v²/r points to the centre (unit 2), so by the second law there must be a net force towards the centre: the centripetal ('centre-seeking') force, F_cp = mv²/r = mω²r, directed along −r̂. Centripetal force is not a new kind of force; it is the job done by some real force:

  • Tension in a string whirling a stone, or in the iron ropes of an amusement-park ride.
  • Gravity for a satellite around the Earth, the Moon around the Earth and planets around the Sun.
  • Friction between the tyres and the road for a car rounding a level curve.
  • Electrical (Coulomb) force for an electron circling a nucleus in a simple atomic model.

Worked example 1: a whirling stone and the Moon

(a) A 0.5 kg stone is whirled on a string in a horizontal circle of radius 1.5 m at 3 m s⁻¹. Tension = mv²/r = 0.5 × 9/1.5 = 3 N. (b) The Moon circles the Earth at about 3.84 × 10⁸ m once in 27.3 days = 27.3 × 86 400 s ≈ 2.36 × 10⁶ s. Its speed v = 2πR/T = 2π × 3.84 × 10⁸/2.36 × 10⁶ ≈ 1.02 × 10³ m s⁻¹, so a = v²/R ≈ (1.02 × 10³)²/3.84 × 10⁸ ≈ 2.7 × 10⁻³ m s⁻², towards the Earth. The textbook notes that Newton made this calculation himself; it is used again in the unit on gravitation.

A vehicle on a level curved road

On a flat curve three forces act on a car: weight mg down, normal force N up (N = mg) and static friction f_s horizontally towards the centre. Friction must supply mv²/r, and it can be at most μs mg. Safe turn: mv²/r ≤ μs mg, i.e. v ≤ √(μs r g). If v exceeds this, friction cannot supply enough centripetal force and the car skids outwards. The limit depends on μs, which is lower on wet roads.

Worked example 2: safe speed on a flat curve

A level curve has radius 40 m and μs = 0.4 (g = 10 m s⁻²). v_max = √(0.4 × 40 × 10) = √160 ≈ 12.6 m s⁻¹ (about 45 km h⁻¹). A car at 10 m s⁻¹ turns safely; one at 15 m s⁻¹ skids, since it needs mv²/r = m × 225/40 = 5.6m newtons, more than the 4m newtons friction can give.

Banking of roads

To reduce dependence on friction, the outer edge of a curve is raised: the road is banked at an angle θ. Then the normal force N, perpendicular to the road, tilts at θ to the vertical. Ignoring friction, its vertical part balances the weight and its horizontal part supplies the centripetal force: N cos θ = mg and N sin θ = mv²/r. Dividing, tan θ = v²/(rg), so the safe speed is v = √(r g tan θ). A car a little faster tends to slide outwards and friction acts inwards to help; a car a little slower tends to slide inwards and friction acts outwards. Far from the safe speed, friction cannot prevent skidding.

Level road: v_max = √(μs r g). Banked road (no friction): v = √(r g tan θ), or tan θ = v²/(rg).

Worked example 3: banking

(a) A curve of radius 50 m is banked at 10° (tan 10° ≈ 0.176, g = 9.8 m s⁻²). v = √(50 × 9.8 × 0.176) = √86.4 ≈ 9.3 m s⁻¹. (b) To design a curve of radius 100 m for 20 m s⁻¹: tan θ = 20²/(100 × 9.8) = 400/980 ≈ 0.408, so θ ≈ 22°.

Centrifugal force: a pseudo force

Watch the whirling stone from a frame rotating with it at the same ω. In that frame the stone is at rest, yet the string pulls it inwards with mω²r. For Newton's laws to work in this rotating (non-inertial) frame, we must add an outward force +mω²r, the centrifugal ('flee-from-centre') force, so that the net force is zero. It has no physical origin in any interaction; it arises only because the frame is rotating, so it is called a pseudo force. From an inertial frame there is only the centripetal force, provided by the string.

Although pseudo, its effects are real. When a car turns sharply, passengers feel pushed outwards; seen from the road, they simply tend to continue in a straight line (inertia of direction) while the car turns under them. That is why standing near the open door of a turning bus is dangerous. On a rotating platform a person feels pushed outwards; a raised outer edge supplies a normal force that balances this push.

Worked example 4: centrifugal force on the rotating Earth

The Earth spins at ω = 2π/86 400 s ≈ 7.27 × 10⁻⁵ rad s⁻¹. A person at latitude λ is at a distance r = R cos λ from the axis, so in the Earth's frame the centrifugal force is mω²R cos λ, directed away from the axis. For a 50 kg person on the equator (R = 6.4 × 10⁶ m): F = 50 × (7.27 × 10⁻⁵)² × 6.4 × 10⁶ = 50 × 5.29 × 10⁻⁹ × 6.4 × 10⁶ ≈ 1.7 N, compared with a weight of 50 × 9.8 = 490 N. It is largest at the equator and zero at the poles. (b) A 60 kg passenger in a car rounding a 25 m radius curve at 10 m s⁻¹ feels, in the car's frame, an outward centrifugal force mv²/r = 60 × 100/25 = 240 N.

Centripetal and centrifugal forces compared
Centripetal forceCentrifugal force
Real force supplied by tension, gravity, friction, normal force and so onPseudo (fictitious) force with no interaction behind it
Acts in inertial and non-inertial framesAppears only in rotating (non-inertial) frames
Directed towards the centre or axisDirected away from the centre or axis
Magnitude mv²/r = mω²rMagnitude mω²r = mv²/r
Origin: interaction between bodiesOrigin: inertia of the body, seen from a rotating frame

The two are not an action-reaction pair: they never appear together in an inertial frame, and in the rotating frame both act on the same body.

Key takeaways

  • Circular motion always needs a net inward force F_cp = mv²/r = mω²r, supplied by a real force.
  • Level road: friction supplies the centripetal force, safe if v ≤ √(μs r g).
  • Banked road: N sin θ supplies it, giving the safe speed √(r g tan θ).
  • Centrifugal force mω²r is a pseudo force that appears only in rotating frames, with real effects.
  • On the rotating Earth the centrifugal force is mω²R cos λ: tiny compared with weight, largest at the equator.

Check your understanding

  1. 1. When a car rounds a level curve, the centripetal force is provided by:

    1. the engine
    2. the normal force
    3. static friction between the tyres and road
    4. the centrifugal force
    Show answer

    Answer: C. On a level road the only horizontal force on the car is the static friction between the tyres and the road, directed towards the centre of the curve.

  2. 2. A 0.2 kg ball is whirled in a circle of radius 0.5 m at 5 m s⁻¹. The tension in the string (ignoring gravity) is:

    1. 10 N
    2. 2 N
    3. 5 N
    4. 0.5 N
    Show answer

    Answer: A. T = mv²/r = 0.2 × 25/0.5 = 5/0.5 = 10 N.

  3. 3. The maximum safe speed on a level curve of radius 90 m with μs = 0.4 (g = 10 m s⁻²) is:

    1. 36 m s⁻¹
    2. 19 m s⁻¹
    3. 9 m s⁻¹
    4. 12 m s⁻¹
    Show answer

    Answer: B. v_max = √(μs r g) = √(0.4 × 90 × 10) = √360 ≈ 19 m s⁻¹.

  4. 4. A road of radius 40 m is banked for a speed of 14 m s⁻¹ (g = 9.8 m s⁻²). The banking angle θ satisfies:

    1. tan θ = 0.5
    2. tan θ = 2.0
    3. tan θ = 0.25
    4. tan θ = 0.35
    Show answer

    Answer: A. tan θ = v²/(rg) = 196/(40 × 9.8) = 196/392 = 0.5, so θ ≈ 26.6°.

  5. 5. Centrifugal force:

    1. is the reaction to the centripetal force
    2. acts in all inertial frames
    3. is a real force produced by tension
    4. appears only when motion is described from a rotating frame
    Show answer

    Answer: D. Centrifugal force is a pseudo force that must be added in rotating (non-inertial) frames. It is not the reaction to the centripetal force, does not exist in inertial frames, and has no physical source such as tension.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Laws of Motion

Privacy · Terms · Refunds · Delivery