- Practice
- About 35 min
- 15 practice questions
Final self-assessment: Laws of Motion
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 35 minutes, with a rough sheet for the numericals and without looking back at the lessons. The questions mix all five lessons, include assertion-reason items, and are a little harder than the lesson checks. Check your answers only after you finish, and read every explanation.
Final self-assessment
-
1. Galileo's experiment with two facing inclined planes showed that:
- a force is needed to keep a body moving
- heavier bodies roll faster
- in the absence of friction, no force is needed to maintain motion
- a ball always stops at the bottom
Show answer
Answer: C. With the second plane made horizontal and smooth, the ball would roll on indefinitely. So force is needed only to change motion; Aristotle's idea that motion needs a force was wrong.
-
2. The position of a 2 kg particle is r = (3t² î + 4t ĵ) m. The net force on it is:
- 12 N along +x
- 6 N along +x
- 8 N along +y
- zero
Show answer
Answer: A. v = 6t î + 4ĵ, a = 6î m s⁻² (constant). F = ma = 2 × 6 = 12 N along +x. The y-velocity is constant, so there is no force along y.
-
3. Assertion (A): Action and reaction forces cancel each other, so a body can never accelerate. Reason (R): Action and reaction are equal in magnitude and opposite in direction.
- Both A and R are true, and R explains A.
- Both A and R are true, but R does not explain A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: D. R is true, but A is false: action and reaction act on different bodies, so they never cancel in the free body diagram of a single body.
-
4. A block slides from rest down a smooth incline 4.9 m long at 30° (g = 9.8 m s⁻²). Its speed at the bottom is:
- 9.8 m s⁻¹
- 4.9 m s⁻¹
- 7.0 m s⁻¹
- 3.5 m s⁻¹
Show answer
Answer: C. v = √(2gs sin θ) = √(2 × 9.8 × 4.9 × 0.5) = √48.02 ≈ 6.93 m s⁻¹, about 7.0 m s⁻¹.
-
5. Masses 3 kg and 2 kg hang over a smooth pulley (g = 10 m s⁻²). The tension in the string is:
- 24 N
- 20 N
- 30 N
- 12 N
Show answer
Answer: A. T = 2m₁m₂g/(m₁ + m₂) = 2 × 3 × 2 × 10/5 = 120/5 = 24 N. Check: a = (3 − 2) × 10/5 = 2 m s⁻²; for the 2 kg mass T − 20 = 2 × 2, so T = 24 N.
-
6. A 3 kg block on a smooth table is pulled by a string over a pulley at the edge, from which 1 kg hangs (g = 10 m s⁻²). The acceleration is:
- 10 m s⁻²
- 2.5 m s⁻²
- 3.3 m s⁻²
- 5 m s⁻²
Show answer
Answer: B. a = m₁g/(m₁ + m₂) with m₁ the hanging mass: a = 1 × 10/(1 + 3) = 2.5 m s⁻².
-
7. A 60 N weight hangs from two strings each making 60° with the vertical. The tension in each string is:
- 30 N
- 34.6 N
- 120 N
- 60 N
Show answer
Answer: D. T = mg/(2 cos θ) = 60/(2 × cos 60°) = 60/(2 × 0.5) = 60 N. By Lami: the strings are 120° apart and each makes 120° with the weight, so all three forces are equal.
-
8. A 50 g bullet leaves a 2 kg pistol at 200 m s⁻¹. The pistol's recoil momentum is:
- 10 kg m s⁻¹ forwards
- 5 kg m s⁻¹ backwards
- 10 kg m s⁻¹ backwards
- 400 kg m s⁻¹ backwards
Show answer
Answer: C. The bullet's momentum is 0.050 × 200 = 10 kg m s⁻¹ forwards. Total momentum stays zero, so the pistol has 10 kg m s⁻¹ backwards (recoil speed 10/2 = 5 m s⁻¹).
-
9. A 0.5 kg ball moving at 12 m s⁻¹ is stopped by a wall in 0.02 s. The average force on the ball is:
- 6 N
- 300 N
- 120 N
- 0.12 N
Show answer
Answer: B. Δp = 0.5 × 12 = 6 N s. F_avg = Δp/Δt = 6/0.02 = 300 N, opposite to the ball's motion.
-
10. A block of 4 kg rests on a horizontal floor with μs = 0.6 and μk = 0.4 (g = 10 m s⁻²). A horizontal force of 30 N is applied. The block:
- stays at rest with 30 N friction
- moves with acceleration 7.5 m s⁻²
- stays at rest with 24 N friction
- moves with acceleration 3.5 m s⁻²
Show answer
Answer: D. Maximum static friction = 0.6 × 40 = 24 N < 30 N, so the block slides. Then f_k = 0.4 × 40 = 16 N and a = (30 − 16)/4 = 3.5 m s⁻².
-
11. A body is about to slide on an incline whose angle of repose is 30°. The coefficient of static friction is:
- 0.5
- 0.577
- 0.866
- 1.73
Show answer
Answer: B. μs = tan 30° = 1/√3 ≈ 0.577.
-
12. Assertion (A): Ball bearings reduce friction in machines. Reason (R): Rolling friction is much smaller than sliding (kinetic) friction.
- Both A and R are true, and R explains A.
- Both A and R are true, but R does not explain A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. Both are true. Ball bearings replace sliding between surfaces by rolling, and rolling friction is far smaller than kinetic friction. So R explains A.
-
13. A car of mass 1000 kg rounds a level curve of radius 50 m at 10 m s⁻¹. The friction force needed is:
- 500 N
- 20 000 N
- 200 N
- 2000 N
Show answer
Answer: D. Friction must supply the centripetal force: mv²/r = 1000 × 100/50 = 2000 N, towards the centre.
-
14. The safe speed on a road of radius 30 m banked at 45° (g = 10 m s⁻²) is about:
- 30 m s⁻¹
- 17.3 m s⁻¹
- 10 m s⁻¹
- 5.5 m s⁻¹
Show answer
Answer: B. v = √(r g tan θ) = √(30 × 10 × 1) = √300 ≈ 17.3 m s⁻¹.
-
15. As a person walks from a pole of the Earth to the equator, the centrifugal force on him due to the Earth's rotation:
- decreases
- stays the same
- increases
- first increases then decreases
Show answer
Answer: C. The force is mω²R cos λ. At the pole λ = 90° and cos λ = 0; at the equator cos λ = 1. So it increases from zero to its maximum.
Revisit the lessons for the questions you missed: questions 1-3, lesson 1 (Newton's laws and inertia); questions 4-6, lesson 2 (free body diagrams, inclines and connected bodies); questions 7-9, lesson 3 (Lami's theorem, momentum and impulse); questions 10-12, lesson 4 (friction); questions 13-15, lesson 5 (circular motion, banking and centrifugal force).
Sign in to keep track of the lessons you finish.