- Practice
- About 25 min
- 5 practice questions
Collisions: elastic, inelastic and the coefficient of restitution
Show that momentum is conserved in every collision, derive the final velocities in a one-dimensional elastic collision and its special cases, and handle perfectly inelastic collisions, kinetic energy loss and the coefficient of restitution.
If something looks wrong, please tell us.
By the end of this lesson you can
- Prove from Newton's third law that total linear momentum is conserved in a collision.
- Distinguish elastic, inelastic and perfectly inelastic collisions.
- Derive v₁ and v₂ for a one-dimensional elastic collision and interpret the four special cases.
- Find the common velocity and the loss of kinetic energy in a perfectly inelastic collision.
- Define the coefficient of restitution e and state its values for different collisions.
Carrom coins, billiard balls and marbles collide all the time; so do railway wagons when they are coupled. Collisions can even happen without contact, through forces acting at a distance. The tools of this unit, momentum and kinetic energy, tell us what happens after a collision without knowing the complicated forces during it.
Momentum is conserved in every collision
During the short collision time Δt, body 1 exerts a force F⃗₂₁ on body 2 and body 2 exerts F⃗₁₂ on body 1. The changes in momentum are Δp⃗₁ = F⃗₁₂ Δt and Δp⃗₂ = F⃗₂₁ Δt. Adding, Δp⃗₁ + Δp⃗₂ = (F⃗₁₂ + F⃗₂₁) Δt. By Newton's third law F⃗₁₂ = −F⃗₂₁, so Δ(p⃗₁ + p⃗₂) = 0: the total linear momentum is conserved. Momentum is a vector, so the momenta must be added as vectors (in one dimension, with signs).
Types of collision
In every collision the total momentum and the total energy are conserved, but the kinetic energy need not be: some of it may become heat, sound, light or deformation. In an elastic collision, total kinetic energy before = total kinetic energy after. In an inelastic collision, the total kinetic energy after is less; the difference is the loss ΔQ. If the bodies stick together and move with a common velocity, the collision is perfectly (completely) inelastic, as when a lump of wet clay is thrown onto a moving cart.
Elastic and inelastic collisions (after Table 4.4 of the textbook)
-
Elastic collision
- Total momentum conserved
- Total kinetic energy conserved
- Forces involved are conservative
- No mechanical energy dissipated
-
Inelastic collision
- Total momentum conserved
- Total kinetic energy NOT conserved
- Forces involved are non-conservative
- Energy dissipated as heat, light, sound
Elastic collision in one dimension
Bodies of mass m₁ and m₂ move along the x-axis on a smooth surface with velocities u₁ and u₂ (u₁ > u₂, so that they collide), and have velocities v₁ and v₂ afterwards. Momentum: m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂, i.e. m₁(u₁ − v₁) = m₂(v₂ − u₂) … (1). Kinetic energy: ½m₁u₁² + ½m₂u₂² = ½m₁v₁² + ½m₂v₂², i.e. m₁(u₁ − v₁)(u₁ + v₁) = m₂(v₂ − u₂)(v₂ + u₂) … (2), using a² − b² = (a + b)(a − b).
Dividing (2) by (1): u₁ + v₁ = v₂ + u₂, or u₁ − u₂ = −(v₁ − v₂). In an elastic head-on collision the relative velocity after the collision has the same size as before but is reversed, whatever the masses. Using v₂ = u₁ + v₁ − u₂ in (1) and simplifying gives the final velocities:
v₁ = [(m₁ − m₂)/(m₁ + m₂)] u₁ + [2m₂/(m₁ + m₂)] u₂; v₂ = [2m₁/(m₁ + m₂)] u₁ + [(m₂ − m₁)/(m₁ + m₂)] u₂.
| Case | Condition | Result | Meaning |
|---|---|---|---|
| 1 | m₁ = m₂ | v₁ = u₂, v₂ = u₁ | Equal masses exchange velocities |
| 2 | m₁ = m₂, u₂ = 0 | v₁ = 0, v₂ = u₁ | The first body stops; the target moves off with its velocity (as with carrom coins) |
| 3 | m₁ ≪ m₂, u₂ = 0 | v₁ ≈ −u₁, v₂ ≈ 0 | A light body rebounds with the same speed from a heavy one, like a ball from a wall |
| 4 | m₁ ≫ m₂, u₂ = 0 | v₁ ≈ u₁, v₂ ≈ 2u₁ | The heavy body carries on; the light target flies off at twice the speed |
Perfectly inelastic collision
If the bodies stick together, they move with a common velocity v. Momentum conservation gives m₁u₁ + m₂u₂ = (m₁ + m₂)v, so v = (m₁u₁ + m₂u₂)/(m₁ + m₂). The kinetic energy before is ½m₁u₁² + ½m₂u₂² and after is ½(m₁ + m₂)v². Substituting v and simplifying, the loss of kinetic energy is ΔQ = ½ [m₁m₂/(m₁ + m₂)] (u₁ − u₂)². Since this is never negative, kinetic energy is always lost, turning into heat, sound and so on.
Coefficient of restitution
Drop a rubber ball and a plastic ball on the same floor: the rubber ball bounces higher because it loses less kinetic energy. The coefficient of restitution (e) measures this. It is the ratio of the velocity of separation after the collision to the velocity of approach before it: e = (v₂ − v₁)/(u₁ − u₂). It is a pure number. For an elastic collision the velocity of separation equals the velocity of approach, so e = 1. For a perfectly inelastic collision the bodies do not separate, so e = 0. For real collisions 0 < e < 1.
Classifying collisions by the coefficient of restitution
-
e = 1: elastic
- No loss of kinetic energy
- Relative speed unchanged, direction reversed
-
0 < e < 1: inelastic
- Some kinetic energy lost
- Bodies separate more slowly than they approached
-
e = 0: perfectly inelastic
- Bodies stick together
- Maximum loss of kinetic energy for the given momentum
Worked example 1: elastic collision with a target at rest
A 2 kg ball moving at 6 m s⁻¹ hits a 1 kg ball at rest, elastically and head-on. v₁ = [(2 − 1)/3] × 6 + 0 = 2 m s⁻¹. v₂ = [2 × 2/3] × 6 + 0 = 8 m s⁻¹. Checks: momentum 2 × 6 = 12 before and 2 × 2 + 1 × 8 = 12 after; KE ½ × 2 × 36 = 36 J before and ½ × 2 × 4 + ½ × 1 × 64 = 4 + 32 = 36 J after; relative speed 6 m s⁻¹ before and 8 − 2 = 6 m s⁻¹ after.
Worked example 2: a head-on elastic collision
A 3 kg body moving at +4 m s⁻¹ meets a 1 kg body moving at −2 m s⁻¹ (opposite direction), elastically. v₁ = [(3 − 1)/4] × 4 + [2 × 1/4] × (−2) = 2 − 1 = +1 m s⁻¹. v₂ = [2 × 3/4] × 4 + [(1 − 3)/4] × (−2) = 6 + 1 = +7 m s⁻¹. Both now move in the positive direction. Checks: momentum 12 − 2 = 10 before, 3 + 7 = 10 after; KE 24 + 2 = 26 J before, 1.5 + 24.5 = 26 J after.
Worked example 3: coupling railway wagons
A 4000 kg wagon moving at 3 m s⁻¹ couples with a 2000 kg wagon at rest. Common velocity: v = (4000 × 3 + 0)/6000 = 2 m s⁻¹. KE before: ½ × 4000 × 9 = 18 000 J. KE after: ½ × 6000 × 4 = 12 000 J. Loss: 6000 J. Formula check: ΔQ = ½ × (4000 × 2000/6000) × (3 − 0)² = ½ × 1333.3 × 9 = 6000 J.
Worked example 4: a bullet stopped in a hanging block
A 20 g bullet is fired into a hanging 980 g wooden block and stays inside; the block rises 0.20 m (g = 10 m s⁻²). Find the bullet's speed. Step 1 (after the collision): the rise needs v = √(2gh) = √(2 × 10 × 0.20) = √4 = 2 m s⁻¹. Step 2 (the collision): 0.020 × u = (0.020 + 0.980) × 2 = 2.0, so u = 2.0/0.020 = 100 m s⁻¹. Note that energy is NOT conserved in step 2 (perfectly inelastic), but it is conserved in step 1.
Worked example 5: a bouncing ball
A ball dropped from 1.6 m rebounds to 0.9 m. The floor is at rest, so e = (speed after)/(speed before) = √(2g × 0.9)/√(2g × 1.6) = √(0.9/1.6) = √0.5625 = 0.75.
Key takeaways
- Total momentum is conserved in all collisions; kinetic energy only in elastic ones.
- Elastic, 1-D: relative velocity is reversed; equal masses exchange velocities.
- Perfectly inelastic: v = (m₁u₁ + m₂u₂)/(m₁ + m₂); KE lost = ½[m₁m₂/(m₁ + m₂)](u₁ − u₂)².
- e = velocity of separation/velocity of approach: 1 for elastic, 0 for perfectly inelastic.
Check your understanding
-
1. A ball collides elastically and head-on with an identical ball at rest. After the collision:
- both move with half the initial velocity
- the first ball rebounds with the same speed
- the first ball stops and the second moves with the first ball's initial velocity
- both stop
Show answer
Answer: C. For m₁ = m₂ and u₂ = 0, v₁ = 0 and v₂ = u₁: the velocities are exchanged. 'Both move with half the velocity' is what happens if they stick together.
-
2. A 2 kg body moving at 5 m s⁻¹ collides with a 3 kg body at rest and they stick together. Their common velocity is:
- 2 m s⁻¹
- 5 m s⁻¹
- 3.3 m s⁻¹
- 2.5 m s⁻¹
Show answer
Answer: A. v = (m₁u₁ + m₂u₂)/(m₁ + m₂) = (2 × 5 + 0)/5 = 10/5 = 2 m s⁻¹.
-
3. The coefficient of restitution for a perfectly inelastic collision is:
- 1
- between 0 and 1
- infinite
- 0
Show answer
Answer: D. In a perfectly inelastic collision the bodies stick together, so the velocity of separation is zero and e = 0/(velocity of approach) = 0.
-
4. Two balls approach each other with a relative speed of 8 m s⁻¹ and separate after the collision with a relative speed of 6 m s⁻¹. The coefficient of restitution is:
- 1.33
- 0.75
- 0.25
- 0.50
Show answer
Answer: B. e = velocity of separation/velocity of approach = 6/8 = 0.75.
-
5. A 1 kg ball moving at 4 m s⁻¹ hits a 1 kg ball at rest and they stick together. The loss of kinetic energy is:
- 8 J
- 2 J
- 4 J
- 0
Show answer
Answer: C. Common velocity v = 4/2 = 2 m s⁻¹. KE before = ½ × 1 × 16 = 8 J; KE after = ½ × 2 × 4 = 4 J; loss = 4 J. Formula: ½ × (1 × 1/2) × 4² = 4 J.
Sign in to keep track of the lessons you finish.