• Practice
  • About 22 min
  • 5 practice questions

Elastic potential energy, conservative forces and conservation of energy

Derive the elastic potential energy ½kx² of a spring, read its force and energy graphs, tell conservative from non-conservative forces, and apply the law of conservation of energy.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Use Hooke's law F_s = −kx and derive U = ½kx² for a spring.
  • Interpret the force-displacement and potential energy-displacement graphs of a spring.
  • Define conservative and non-conservative forces and give examples of each.
  • Use F = −dU/dx in one dimension.
  • Apply the law of conservation of energy to falling bodies, upward throws and a spring-mass system.

A stretched catapult rubber or a compressed spring stores energy that can launch a stone or push a toy car. This stored energy is elastic potential energy. In this lesson we find its formula, see why some forces (like gravity and spring force) let us store energy and get it back while others (like friction) do not, and use this to state the law of conservation of energy.

Elastic potential energy of a spring

Attach a mass m to a spring on a smooth horizontal table, the other end fixed to a wall. At the equilibrium position x = 0 the potential energy is zero. When the spring is stretched by x, it develops a restoring spring force F_s = −kx (Hooke's law), where k is the spring constant (force constant) in N m⁻¹. The negative sign shows that the spring force always opposes the displacement. To stretch the spring slowly, we apply an equal and opposite force F_a = +kx.

The work done by the applied force is stored as elastic potential energy. Since F_a and dx are in the same direction, U = ∫ from 0 to x of kx dx = k[x²/2] from 0 to x = ½kx². If the spring is taken from x_i to x_f, then U = ½k(x_f² − x_i²). The energy stored depends only on k and on the stretch or compression x, not on the mass attached, and a compression of x stores the same energy as a stretch of x.

Spring force F_s = −kx; elastic potential energy U = ½kx²; from x_i to x_f: U = ½k(x_f² − x_i²).

Graphs for a spring

Because F = −kx, the graph of spring force against displacement is a straight line through the origin with negative slope, lying in the second and fourth quadrants. The area of the triangle between this line and the x-axis, ½ × base × height = ½ × x × kx = ½kx², is the size of the work done by the spring force. The potential energy-displacement graph is a parabola U = ½kx². In a frictionless system the energy passes from potential to kinetic and back again repeatedly; at every point KE + U equals the same total energy, so the kinetic energy curve is an upside-down parabola, largest at x = 0.

Conservative and non-conservative forces

A force is conservative if the work done by or against it in moving a body depends only on the initial and final positions, not on the path taken. Lift a book from the floor to a table straight up, or along a slanting path, or in a zigzag: the work done against gravity is mgh every time. So gravitational force is conservative. Elastic spring force and electrostatic force are other examples. For a conservative force in one dimension, the force is the negative gradient of potential energy: F = −dU/dx.

A force is non-conservative if the work done depends on the path. Friction is the standard example: the longer the path, the more work is done against it. Air resistance and viscous force are also non-conservative; the work done against them depends on the speed of motion. The energy spent against them appears as heat and cannot be fully recovered.

Conservative versus non-conservative forces (after Table 4.3 of the textbook)

  • Conservative force
    • Work is independent of the path
    • Work in a round trip is zero
    • Total mechanical energy stays constant
    • Work done is fully recoverable
    • F = −dU/dx
  • Non-conservative force
    • Work depends on the path
    • Work in a round trip is not zero
    • Energy is dissipated as heat
    • Work done is not fully recoverable
    • No such relation with a potential energy

The law of conservation of energy

Throw a ball upward: its kinetic energy falls and its potential energy rises until, at the top, the energy is all potential. On the way down the potential energy changes back into kinetic energy; just before it touches the ground the energy is all kinetic. When only conservative forces act, the total mechanical energy E = KE + U stays constant at every point. More generally, energy can neither be created nor destroyed; it can only change from one form to another, and the total energy of an isolated system remains constant. When the ball finally hits the ground, its kinetic energy becomes sound, heat and deformation.

Energy changes for a body released from height h

  1. Top (height h) U = mgh, KE = 0, E = mgh
  2. After falling a distance y U = mg(h − y), KE = mgy, E = mgh
  3. Just above the ground U = 0, KE = mgh, E = mgh

Energy conservation gives quick answers. For a body thrown up with speed v₀, at height h: ½mv₀² = ½mv² + mgh, so v = √(v₀² − 2gh), the same result as the equations of motion but with far less work.

Worked example 1: energy stored in a spring

A spring of constant k = 200 N m⁻¹ is stretched by 5.0 cm. (a) x = 0.050 m, U = ½ × 200 × (0.050)² = 100 × 0.0025 = 0.25 J. (b) The spring force opposes the stretch, so the work done by the spring force is −0.25 J. (c) Stretching it further from 5.0 cm to 10 cm stores ½ × 200 × (0.10² − 0.050²) = 100 × (0.010 − 0.0025) = 0.75 J more: the second 5 cm needs three times the work of the first.

Worked example 2: two springs, same force

Springs A (k_A = 100 N m⁻¹) and B (k_B = 400 N m⁻¹) are each stretched by a force of 20 N. Stretches: x_A = F/k_A = 0.20 m; x_B = F/k_B = 0.050 m. Energies: U_A = ½ × 100 × 0.20² = 2.0 J; U_B = ½ × 400 × 0.050² = 0.50 J. Since U = F²/2k for a given force, the softer spring stores more energy: U_A/U_B = k_B/k_A = 4.

Worked example 3: friction wastes work

A 5 kg box is pushed 8 m along a rough floor by a horizontal force of 30 N; the coefficient of kinetic friction is 0.4 (g = 10 m s⁻²). Friction: f_k = μ_k mg = 0.4 × 5 × 10 = 20 N. Work by the push: 30 × 8 = +240 J. Work by friction: −20 × 8 = −160 J. Net work = 80 J, which is the gain in kinetic energy. The 160 J becomes heat and cannot be recovered, because friction is non-conservative.

Worked example 4: a falling stone

A 0.5 kg stone is dropped from 20 m (g = 10 m s⁻²). Total energy at the top: E = mgh = 0.5 × 10 × 20 = 100 J. At 5 m height: U = 0.5 × 10 × 5 = 25 J, so KE = 100 − 25 = 75 J and v = √(2 × 75/0.5) = √300 ≈ 17.3 m s⁻¹. At the ground: KE = 100 J, v = √(2 × 100/0.5) = √400 = 20 m s⁻¹.

Worked example 5: a block on a spring

A 0.5 kg block on a smooth table is attached to a spring (k = 50 N m⁻¹), pulled 0.20 m from equilibrium and released. Total energy: E = ½ × 50 × 0.20² = 1.0 J. At x = 0: U = 0, so KE = 1.0 J and v = √(2 × 1.0/0.5) = 2.0 m s⁻¹, the maximum speed; the force F = −kx is zero here. At x = ±0.20 m: the block is momentarily at rest, but the force is largest, |F| = 50 × 0.20 = 10 N, directed towards equilibrium. At x = 0.10 m: U = ½ × 50 × 0.01 = 0.25 J, KE = 0.75 J, v = √3 ≈ 1.73 m s⁻¹. Also, for U = 3x² J, F = −dU/dx = −6x, so at x = 2 m, F = −12 N.

Key takeaways

  • Spring: F_s = −kx and U = ½kx², independent of the attached mass.
  • Conservative forces (gravity, spring, electrostatic): work is path-independent and zero round a closed path; F = −dU/dx.
  • Non-conservative forces (friction, air resistance, viscous force) dissipate energy as heat.
  • With only conservative forces, KE + U is constant; the total energy of an isolated system never changes.

Check your understanding

  1. 1. A spring of constant 400 N m⁻¹ is compressed by 10 cm. The elastic potential energy stored is:

    1. 2 J
    2. 20 J
    3. 4 J
    4. 40 J
    Show answer

    Answer: A. x = 0.10 m. U = ½kx² = ½ × 400 × 0.10² = 200 × 0.01 = 2 J. Using x = 10 (centimetres) without converting would give a wildly large value.

  2. 2. Which of these forces is non-conservative?

    1. Gravitational force
    2. Elastic spring force
    3. Electrostatic force
    4. Kinetic friction
    Show answer

    Answer: D. The work done against kinetic friction depends on the length of the path and is lost as heat, so friction is non-conservative. The other three are conservative.

  3. 3. The work done by a conservative force on a body that moves round a closed path and returns to its starting point is:

    1. positive
    2. zero
    3. negative
    4. equal to the path length times the force
    Show answer

    Answer: B. For a conservative force the work depends only on the initial and final positions. In a round trip they are the same, so the work done is zero.

  4. 4. The potential energy of a particle is U = 5x² − 10x joule (x in metres). The force on it at x = 3 m is:

    1. +20 N
    2. −30 N
    3. −20 N
    4. +15 N
    Show answer

    Answer: C. F = −dU/dx = −(10x − 10). At x = 3 m, F = −(30 − 10) = −20 N, i.e. 20 N towards negative x.

  5. 5. A stone is dropped from a height of 45 m (g = 10 m s⁻², no air resistance). Its speed just before it reaches the ground is:

    1. 45 m s⁻¹
    2. 30 m s⁻¹
    3. 15 m s⁻¹
    4. 900 m s⁻¹
    Show answer

    Answer: B. Energy conservation: mgh = ½mv², so v = √(2gh) = √(2 × 10 × 45) = √900 = 30 m s⁻¹.

Sign in to keep track of the lessons you finish.

Next lesson → Motion in a vertical circle and power

Privacy · Terms · Refunds · Delivery