Revision notes

Unit 4 Work, Energy and Power: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Work done by a constant force and by a variable force

W = F⃗ · dr⃗ = F dr cos θ. Unit: joule (1 J = 1 N m). Dimensions: [ML²T⁻²].

How the angle between force and displacement decides the work
Angle θcos θWork done
θ = 0°1Positive and maximum (F dr)
0° < θ < 90°between 0 and 1Positive
θ = 90°0Zero
90° < θ < 180°between −1 and 0Negative
θ = 180°−1Negative and maximum in size (−F dr)

Nature of the work done by a force

  • Positive work (0° ≤ θ < 90°)
    • Force has a component along the motion
    • Example: gravity on a falling stone
  • Zero work
    • No force, or no displacement
    • Or force ⟂ displacement (θ = 90°)
    • Example: centripetal force
  • Negative work (90° < θ ≤ 180°)
    • Force has a component against the motion
    • Example: friction on a sliding box
  • Work needs both a force and a displacement; W = F dr cos θ is a scalar measured in joules.
  • θ < 90° gives positive work, θ = 90° gives zero work and θ > 90° gives negative work.
  • Constant force: W = (F cos θ)(r_f − r_i), the area of a rectangle on the F cos θ–r graph.
  • Variable force: W = ∫ F cos θ dr, the area under the curve.
Read the full lesson

Lesson 2

Energy, kinetic energy and the work-kinetic energy theorem

Other units of energy (values as used in the Tamil Nadu textbook)
UnitValue in joule
1 erg (CGS unit)10⁻⁷ J
1 electron volt (eV)1.6 × 10⁻¹⁹ J
1 calorie (cal)4.186 J
1 kilowatt hour (kWh)3.6 × 10⁶ J

KE = ½mv². Work-kinetic energy theorem: W = ½mv² − ½mu² = ΔKE.

Two bodies of different mass

  • Same momentum p
    • KE = p²/2m, so KE ∝ 1/m
    • Lighter body has MORE kinetic energy
    • Lighter body moves faster (v = p/m)
  • Same kinetic energy
    • p = √(2m KE), so p ∝ √m
    • Heavier body has MORE momentum
    • Heavier body moves slower

U = mgh (gravitational, near the Earth's surface, ground as zero).

  • Energy is the capacity to do work; it has the unit and dimensions of work.
  • KE = ½mv² is never negative; net work done = change in kinetic energy.
  • KE = p²/2m: for equal momentum the lighter body has more KE.
  • Potential energy = work done by an external force moving the body at constant velocity; near the Earth U = mgh.
Read the full lesson

Lesson 3

Elastic potential energy, conservative forces and conservation of energy

Spring force F_s = −kx; elastic potential energy U = ½kx²; from x_i to x_f: U = ½k(x_f² − x_i²).

Conservative versus non-conservative forces (after Table 4.3 of the textbook)

  • Conservative force
    • Work is independent of the path
    • Work in a round trip is zero
    • Total mechanical energy stays constant
    • Work done is fully recoverable
    • F = −dU/dx
  • Non-conservative force
    • Work depends on the path
    • Work in a round trip is not zero
    • Energy is dissipated as heat
    • Work done is not fully recoverable
    • No such relation with a potential energy

Energy changes for a body released from height h

  1. Top (height h) U = mgh, KE = 0, E = mgh
  2. After falling a distance y U = mg(h − y), KE = mgy, E = mgh
  3. Just above the ground U = 0, KE = mgh, E = mgh
  • Spring: F_s = −kx and U = ½kx², independent of the attached mass.
  • Conservative forces (gravity, spring, electrostatic): work is path-independent and zero round a closed path; F = −dU/dx.
  • Non-conservative forces (friction, air resistance, viscous force) dissipate energy as heat.
  • With only conservative forces, KE + U is constant; the total energy of an isolated system never changes.
Read the full lesson

Lesson 4

Motion in a vertical circle and power

Finding the minimum speed at the lowest point

  1. Top: string just slack Put T₂ = 0 in T₂ + mg = mv₂²/r
  2. Minimum top speed v₂² = gr, so v₂ = √(gr)
  3. Energy conservation v₁² = v₂² + 4gr (the top is 2r higher)
  4. Minimum bottom speed v₁² = 5gr, so v₁ = √(5gr)

Vertical circle: T₁ − T₂ = 6mg; v_top(min) = √(gr); v_bottom(min) = √(5gr).

P = W/t; P_inst = dW/dt = F⃗ · v⃗. 1 W = 1 J s⁻¹; 1 hp = 746 W; 1 kWh = 3.6 × 10⁶ J.

  • Vertical circular motion is non-uniform; T = mg cos θ + mv²/r varies round the circle.
  • T₁ − T₂ = 6mg; minimum speeds are √(gr) at the top and √(5gr) at the bottom.
  • Power = rate of doing work; SI unit watt; 1 hp = 746 W.
  • The kilowatt hour (3.6 × 10⁶ J) is the unit of electrical energy; P = F⃗ · v⃗.
Read the full lesson

Lesson 5

Collisions: elastic, inelastic and the coefficient of restitution

Elastic and inelastic collisions (after Table 4.4 of the textbook)

  • Elastic collision
    • Total momentum conserved
    • Total kinetic energy conserved
    • Forces involved are conservative
    • No mechanical energy dissipated
  • Inelastic collision
    • Total momentum conserved
    • Total kinetic energy NOT conserved
    • Forces involved are non-conservative
    • Energy dissipated as heat, light, sound

v₁ = [(m₁ − m₂)/(m₁ + m₂)] u₁ + [2m₂/(m₁ + m₂)] u₂; v₂ = [2m₁/(m₁ + m₂)] u₁ + [(m₂ − m₁)/(m₁ + m₂)] u₂.

Special cases of a one-dimensional elastic collision
CaseConditionResultMeaning
1m₁ = m₂v₁ = u₂, v₂ = u₁Equal masses exchange velocities
2m₁ = m₂, u₂ = 0v₁ = 0, v₂ = u₁The first body stops; the target moves off with its velocity (as with carrom coins)
3m₁ ≪ m₂, u₂ = 0v₁ ≈ −u₁, v₂ ≈ 0A light body rebounds with the same speed from a heavy one, like a ball from a wall
4m₁ ≫ m₂, u₂ = 0v₁ ≈ u₁, v₂ ≈ 2u₁The heavy body carries on; the light target flies off at twice the speed

Classifying collisions by the coefficient of restitution

  • e = 1: elastic
    • No loss of kinetic energy
    • Relative speed unchanged, direction reversed
  • 0 < e < 1: inelastic
    • Some kinetic energy lost
    • Bodies separate more slowly than they approached
  • e = 0: perfectly inelastic
    • Bodies stick together
    • Maximum loss of kinetic energy for the given momentum
  • Total momentum is conserved in all collisions; kinetic energy only in elastic ones.
  • Elastic, 1-D: relative velocity is reversed; equal masses exchange velocities.
  • Perfectly inelastic: v = (m₁u₁ + m₂u₂)/(m₁ + m₂); KE lost = ½[m₁m₂/(m₁ + m₂)](u₁ − u₂)².
  • e = velocity of separation/velocity of approach: 1 for elastic, 0 for perfectly inelastic.
Read the full lesson

Privacy · Terms · Refunds · Delivery