- Practice
- About 30 min
- 15 practice questions
Final self-assessment: Motion of System of Particles and Rigid Bodies
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 30 minutes, with a rough sheet for the numericals and without looking back at the lessons. The questions mix ideas from all five lessons, include an assertion-reason item, and are a little harder than the lesson checks. Check your answers only after you finish, and read every explanation, including those for questions you got right.
Final self-assessment
-
1. Masses of 1 kg, 2 kg and 3 kg are placed at (0, 0), (2 m, 0) and (0, 3 m) respectively. The centre of mass is at:
- (1.0 m, 1.0 m)
- (0.67 m, 1.5 m)
- (1.5 m, 0.67 m)
- (0.67 m, 1.0 m)
Show answer
Answer: B. M = 6 kg. x_CM = (1 × 0 + 2 × 2 + 3 × 0)/6 = 4/6 ≈ 0.67 m. y_CM = (1 × 0 + 2 × 0 + 3 × 3)/6 = 9/6 = 1.5 m.
-
2. A circular hole of radius R/3, centred 2R/3 from the centre O, is cut from a uniform disc of radius R. The centre of mass of the remaining part is:
- R/12 from O, on the side away from the hole
- R/12 from O, on the side of the hole
- R/6 from O, on the side away from the hole
- at O
Show answer
Answer: A. Removed mass = M(1/3)² = M/9; remaining = 8M/9. About O: (8M/9)x + (M/9)(2R/3) = 0, so x = −R/12, i.e. R/12 on the far side from the hole.
-
3. A shell at the top of its flight bursts by itself into two equal halves. One half drops vertically from rest and lands at R/2, where R is the range the shell would have had. Both halves land at the same time. The other half lands at:
- R
- 2R
- 3R/2
- 5R/4
Show answer
Answer: C. Internal forces leave the CM's path unchanged, so the CM lands at R. With equal masses the CM is midway: (R/2 + x)/2 = R gives x = 3R/2.
-
4. A force F⃗ = (4î − ĵ) N acts at the point r⃗ = (2î + 3ĵ) m. The torque about the origin is:
- (14 k̂) N m
- (10 k̂) N m
- (−10 k̂) N m
- (−14 k̂) N m
Show answer
Answer: D. τ⃗ = r⃗ × F⃗; for vectors in the x-y plane, τ_z = xF_y − yF_x = (2)(−1) − (3)(4) = −2 − 12 = −14. So τ⃗ = −14 k̂ N m (into the page: clockwise).
-
5. Assertion (A): A particle moving with constant velocity along a straight line has constant angular momentum about any fixed point not on that line. Reason (R): Its angular momentum about the point is m v d, where d is the perpendicular distance of the line from the point.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. L = rp sin θ = p(r sin θ) = m v d. As the particle moves, r and θ change but r sin θ = d stays fixed, so L is constant. R explains A.
-
6. The angular momentum of a flywheel rises steadily from 4 kg m² s⁻¹ to 10 kg m² s⁻¹ in 2 s. The torque acting on it is:
- 6 N m
- 3 N m
- 7 N m
- 12 N m
Show answer
Answer: B. τ = dL/dt = ΔL/Δt = (10 − 4)/2 = 3 N m.
-
7. A uniform 6 m beam of mass 20 kg rests on supports at its two ends. A 30 kg person stands 2 m from the left end (g = 10 m s⁻²). The force from the left support is:
- 250 N
- 200 N
- 300 N
- 500 N
Show answer
Answer: C. Take torques about the right end: R_L × 6 = (200 N)(3 m) + (300 N)(4 m) = 600 + 1200 = 1800, so R_L = 300 N. Then R_R = 500 − 300 = 200 N.
-
8. A cyclist leans at 30° to the vertical while riding at 5 m s⁻¹ on a level curve (g = 10 m s⁻²). The radius of the curve is about:
- 1.44 m
- 2.5 m
- 8.66 m
- 4.33 m
Show answer
Answer: D. tan θ = v²/rg, so r = v²/(g tan 30°) = 25/(10 × 0.577) ≈ 4.33 m.
-
9. A wheel rolls along a straight level road at constant speed and without slipping, with the net force and net torque on it zero. Its state is best described as:
- dynamic equilibrium
- static equilibrium
- unstable equilibrium
- not in equilibrium
Show answer
Answer: A. Its linear and angular momenta are constant but not zero, while the net force and net torque are zero: this is dynamic equilibrium. Static equilibrium needs both momenta to be zero.
-
10. A uniform disc of mass 2 kg and radius 0.1 m. Its moment of inertia about a tangent lying in its own plane is:
- 0.010 kg m²
- 0.030 kg m²
- 0.025 kg m²
- 0.015 kg m²
Show answer
Answer: C. About a diameter I = MR²/4 (perpendicular axis theorem). The tangent in the plane is parallel to a diameter at distance R: I = MR²/4 + MR² = 5MR²/4 = 1.25 × 2 × 0.01 = 0.025 kg m².
-
11. The moment of inertia of a uniform rod of mass M and length ℓ about a perpendicular axis through a point ℓ/4 from its centre is:
- 7Mℓ²/48
- Mℓ²/16
- Mℓ²/3
- 5Mℓ²/48
Show answer
Answer: A. Parallel axis theorem: I = Mℓ²/12 + M(ℓ/4)² = 4Mℓ²/48 + 3Mℓ²/48 = 7Mℓ²/48.
-
12. The radius of gyration of a uniform rod of length ℓ about a perpendicular axis through one end is:
- ℓ/√12
- ℓ/√3
- ℓ/2
- ℓ/3
Show answer
Answer: B. I = Mℓ²/3 = MK², so K = ℓ/√3 ≈ 0.577ℓ. ℓ/√12 is the value about the centre.
-
13. A child of mass 40 kg stands at the rim (radius 2 m) of a playground roundabout of moment of inertia 200 kg m² turning freely at 2 rad s⁻¹. Treating the child as a point mass, the angular velocity when the child walks to the centre is:
- 2.0 rad s⁻¹
- 1.1 rad s⁻¹
- 3.6 rad s⁻¹
- 5.6 rad s⁻¹
Show answer
Answer: C. No external torque, so Iω is conserved. Iᵢ = 200 + 40 × 2² = 360 kg m²; I_f = 200 kg m². ω_f = 360 × 2/200 = 3.6 rad s⁻¹.
-
14. For a solid sphere rolling without slipping, the fraction of its total kinetic energy that is rotational is:
- 2/5
- 5/7
- 1/2
- 2/7
Show answer
Answer: D. KE_TRANS : KE_ROT = 1 : K²/R² = 1 : 2/5 = 5 : 2. Rotational fraction = 2/(5 + 2) = 2/7.
-
15. A uniform solid cylinder starts from rest and rolls without slipping down a slope through a vertical height of 3 m (g = 10 m s⁻²). Its speed at the bottom is about:
- 7.7 m s⁻¹
- 6.3 m s⁻¹
- 5.5 m s⁻¹
- 4.5 m s⁻¹
Show answer
Answer: B. For a solid cylinder K²/R² = ½. v = √[2gh/(1 + ½)] = √(60/1.5) = √40 ≈ 6.3 m s⁻¹. 7.7 m s⁻¹ = √(2gh) would be for sliding without friction.
Questions 1-3: lesson 1 (centre of mass and its motion). Questions 4-6: lesson 2 (torque and angular momentum). Questions 7-9: lesson 3 (equilibrium, moments and the cyclist). Questions 10-12: lesson 4 (moment of inertia and its theorems). Questions 13-15: lesson 5 (rotational dynamics and rolling).
Sign in to keep track of the lessons you finish.