Revision notes

Unit 7 Properties of Matter: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Elasticity: stress, strain, Hooke's law and the elastic moduli

Kinds of stress and the strain each produces

  • Longitudinal stress Fₙ/A
    • Tensile or compressive
    • Strain: ΔL/L
    • Modulus: Young's modulus Y
  • Shearing stress Fₜ/A
    • Force along the surface
    • Strain: angle of shear θ = x/h
    • Modulus: rigidity modulus η_R
  • Volume stress (pressure P)
    • Normal force on the whole surface
    • Strain: ΔV/V
    • Modulus: bulk modulus K
Elastic moduli of some materials, in units of 10¹⁰ N m⁻² (values as tabulated in the Tamil Nadu textbook)
MaterialYoung's modulus YBulk modulus KRigidity modulus η_R
Steel20.015.88.0
Iron19.0106.4
Copper12.012.04.0
Aluminium7.07.02.5
Glass7.03.62.6

Stress = F/A (Pa); strain = ΔL/L, θ or ΔV/V (no unit). Y = FL/(AΔL), K = −PV/ΔV, η_R = F/(Aθ), μ = lateral strain/longitudinal strain. Energy = ½Fl; per unit volume ½ × stress × strain.

  • Stress is restoring force per unit area (Pa); strain is a fractional change with no unit.
  • Hooke's law: stress ∝ strain up to the proportional limit; beyond the elastic limit the deformation is permanent.
  • Y resists change in length, K resists change in volume (compressibility = 1/K), η_R resists change in shape.
  • Poisson's ratio compares lateral and longitudinal strain.
  • Elastic energy = ½ × force × extension; per unit volume ½ × stress × strain.
Read the full lesson

Lesson 2

Fluids at rest: pressure, Pascal's law and buoyancy

Will it sink or float?

  • Average density greater than the fluid
    • Weight exceeds the largest possible upthrust
    • Sinks
    • Example: an iron nail in water
  • Average density equal to the fluid
    • Weight equals the upthrust when fully immersed
    • Stays at any depth
    • Example: a submarine with tanks partly flooded
  • Average density less than the fluid
    • Floats with only part immersed
    • Fraction submerged = ρ_body/ρ_fluid
    • Example: ice, wood, a steel ship

P = F/A; P = Pₐ + ρgh; hydraulic lift F₂ = F₁A₂/A₁; upthrust = weight of fluid displaced; floating: fraction submerged = ρ_body/ρ_fluid.

  • Pressure is a scalar; 1 atm = 1.013 × 10⁵ Pa.
  • Pressure in a still liquid grows linearly with depth and does not depend on the vessel's shape.
  • Pascal's law lets a hydraulic lift multiply force by A₂/A₁.
  • Upthrust equals the weight of fluid displaced; a floating body displaces its own weight.
Read the full lesson

Lesson 3

Viscosity, streamlined flow, terminal velocity and Stokes' law

How a falling sphere reaches terminal velocity

  1. Released from rest Only weight minus upthrust acts; drag is zero.
  2. Speeds up Drag 6πηrv grows as v grows; acceleration falls.
  3. Forces balance Weight = upthrust + drag; net force zero.
  4. Steady fall at v_t v_t = 2r²(ρ − σ)g/9η.

F = −ηA dv/dx (η in N s m⁻²); R_c = ρvD/η; Stokes: F = 6πηrv; terminal velocity v_t = 2r²(ρ − σ)g/9η; Poiseuille: Q = πPr⁴/8ηl.

  • Viscosity is internal friction; η is force per unit area per unit velocity gradient.
  • Below the critical velocity flow is streamlined; above it, turbulent with eddies.
  • A small Reynolds' number means streamlined flow, a large one turbulent flow.
  • Terminal velocity is reached when weight = upthrust + drag, and v_t ∝ r².
  • Poiseuille's flow rate depends on r⁴, so narrow tubes carry very little.
Read the full lesson

Lesson 4

Surface tension, angle of contact, excess pressure and capillarity

T = F/l (N m⁻¹) = surface energy per unit area. Drop or air bubble: ΔP = 2T/R; soap bubble: ΔP = 4T/R. Capillary rise h = 2T cos θ/(rρg); θ < 90° rise, θ > 90° fall.

  • Surface molecules are pulled inwards, so a liquid surface contracts to the least area.
  • Surface tension (force per length) equals surface energy (work per area).
  • Salt raises the surface tension of water; soap, heating and electrification lower it.
  • An acute angle of contact means wetting and capillary rise; obtuse means a fall.
  • Excess pressure is 2T/R for a drop, 4T/R for a soap bubble; capillary rise is inversely proportional to the radius.
Read the full lesson

Lesson 5

Equation of continuity, Bernoulli's theorem and its applications

Narrow part of a horizontal pipe: why the pressure drops

  1. Pipe narrows Smaller area a.
  2. Continuity av = constant, so the speed v rises.
  3. More kinetic energy ½ρv² per unit volume increases.
  4. Bernoulli P + ½ρv² = constant, so the pressure P falls.

Continuity: a₁v₁ = a₂v₂. Bernoulli: P/ρ + ½v² + gh = constant (P + ½ρv² + ρgh per unit volume); faster flow, lower pressure. Venturimeter: Q = Aa √(2ΔP/ρ(A² − a²)).

  • The equation of continuity is conservation of mass: narrow section, faster flow.
  • A flowing liquid carries pressure, kinetic and potential energy.
  • Bernoulli's theorem is conservation of energy for an ideal liquid in streamlined flow.
  • Lower pressure in fast-moving fluid explains roofs blowing off, wing lift, the Bunsen burner and sprayers.
  • A venturimeter turns a measured pressure difference into a flow rate.
Read the full lesson

Privacy · Terms · Refunds · Delivery