• Practice
  • About 26 min
  • 5 practice questions

Elasticity: stress, strain, Hooke's law and the elastic moduli

Explain the states of matter and elasticity, define the kinds of stress and strain, read a stress-strain curve, and use Young's, bulk and rigidity moduli, Poisson's ratio and elastic energy in calculations.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain solids, liquids and gases in terms of the forces between atoms.
  • Define longitudinal, shearing and volume stress, and the matching strains.
  • State Hooke's law and read the stress-strain curve of a wire.
  • Use Young's modulus, bulk modulus (and compressibility) and rigidity modulus.
  • Calculate Poisson's ratio and the elastic energy stored in a stretched wire.

The Kallanai dam across the Kaveri near Tiruchirappalli, built around the 2nd century AD, has stood up to floodwaters for centuries. Bridges, flyovers, aircraft and even artificial body parts must be made of materials chosen for how they behave under load. Unit 7 of the Tamil Nadu textbook studies these properties of matter, starting with solids.

States of matter at the microscopic level

Ice, water and steam are all made of the same H₂O molecules; what differs is how strongly the molecules are held. In a solid, atoms are bound at fixed distances and only vibrate about their mean positions. Heating makes them vibrate more; above the melting point the bonds break and the atoms move about: a liquid, still held by intermolecular forces but mobile. Heated further (or at reduced pressure), the liquid becomes a gas, whose molecules have very weak or no bonds, move freely and fill any container. Under extreme conditions matter also exists as plasma or a Bose-Einstein condensate.

Elasticity and plasticity

In earlier units bodies were treated as point masses or perfectly rigid. Real bodies change shape slightly under force. A force that changes the size or shape of a body is a deforming force. When it acts, atoms are pulled apart or pushed closer; when it is removed, the interatomic forces pull them back. A body that regains its original size and shape is elastic (steel ropes, metals, rubber within limits). A body that does not regain its shape is plastic (wet clay or putty, for example).

Stress

When a body is deformed, an internal restoring force develops in it. The restoring force per unit area is the stress: σ = F/A. Its SI unit is N m⁻², called the pascal (Pa), with dimensions [ML⁻¹T⁻²]. The internal force on an area ΔA can be split into a component Fₙ normal to the area and a component Fₜ along it. Longitudinal (normal) stress σₙ = Fₙ/ΔA; it is tensile when the two sides pull on each other (a stretched wire) and compressive when they push (a pillar). Shearing (tangential) stress σₜ = Fₜ/ΔA. Volume stress acts when forces press normally on every part of the surface, as on a body immersed in a fluid; it equals the pressure P.

Strain

Strain measures the fractional change in size or shape: it is a ratio of two like quantities and has no unit. Longitudinal strain = ΔL/L (tensile if the length increases, compressive if it decreases). Shearing strain: when a tangential force moves the top face of a block of height h through a distance x relative to the bottom, shear strain = x/h = tan θ ≈ θ, the angle of shear (θ in radians, small). Volume strain = ΔV/V.

Kinds of stress and the strain each produces

  • Longitudinal stress Fₙ/A
    • Tensile or compressive
    • Strain: ΔL/L
    • Modulus: Young's modulus Y
  • Shearing stress Fₜ/A
    • Force along the surface
    • Strain: angle of shear θ = x/h
    • Modulus: rigidity modulus η_R
  • Volume stress (pressure P)
    • Normal force on the whole surface
    • Strain: ΔV/V
    • Modulus: bulk modulus K

Hooke's law and the stress-strain curve

Hooke's law: for small deformations within the elastic limit, the strain produced is directly proportional to the stress producing it. To verify it, a long thin wire hangs from a rigid support with a pan at its lower end; loads are added and the extension ΔL is read on a vernier scale. A graph of ΔL against the stretching force F is a straight line through the origin, and ΔL is found to be proportional to L and inversely proportional to A, which together give stress ∝ strain.

Loading a wire further gives the stress-strain curve (strain on the x-axis, stress on the y-axis). From O to A the graph is straight: Hooke's law holds and A is the proportional limit. From A to B stress is no longer proportional to strain, but the wire still returns to its length when unloaded; B is the elastic limit (yield point), the maximum stress up to which the body regains its size and shape. Beyond B the wire is permanently stretched (plastic behaviour). At D the stress is greatest: the ultimate stress or tensile strength. Beyond D the wire thins and breaks at E, the breaking point. A rubber band pulled too far loses its elasticity in the same way. The steeper the straight part, the larger the modulus and the stiffer the material.

The three moduli of elasticity

Within the elastic limit, stress/strain is a constant called the modulus of elasticity (unit N m⁻² or Pa, dimensions [ML⁻¹T⁻²]). Young's modulus Y = longitudinal stress/longitudinal strain = (F/A)/(ΔL/L) = FL/(AΔL); it measures resistance to change of length. Bulk modulus K = −P/(ΔV/V) = −PV/ΔV; the minus sign shows that an increase in pressure reduces the volume, so K is positive. Its reciprocal is the compressibility, C = 1/K. Gases have a small bulk modulus and a large compressibility (this is what you feel when you press a pumped cycle tyre). Rigidity (shear) modulus η_R = shearing stress/angle of shear = (F/A)/θ = Fh/(Ax); a small η_R means the material twists easily.

Elastic moduli of some materials, in units of 10¹⁰ N m⁻² (values as tabulated in the Tamil Nadu textbook)
MaterialYoung's modulus YBulk modulus KRigidity modulus η_R
Steel20.015.88.0
Iron19.0106.4
Copper12.012.04.0
Aluminium7.07.02.5
Glass7.03.62.6

In physics, 'more elastic' means a larger modulus. For the same stress steel stretches far less than rubber, so steel is more elastic than rubber. This is why steel beams and iron rods are used in buildings and heavy machines: a material with a high Young's modulus bends least under a given load.

Poisson's ratio

A stretched wire becomes longer but also thinner; a stretched rubber band visibly narrows. Poisson's ratio μ = lateral strain/longitudinal strain. For a wire of length L and diameter D, if the length increases by l and the diameter decreases by d, μ = (d/D)/(l/L) in magnitude (a minus sign is sometimes written to show that one dimension shrinks while the other grows). It is a ratio of two strains, so it has no unit. Typical values: about 0.3 for steel and copper, nearly 0.5 for rubber, and almost 0 for cork.

Elastic potential energy

Work done in stretching a wire against its restoring force is stored as elastic potential energy. For a wire of length L and area A, Hooke's law gives F = YAl/L when the extension is l. The work for a further small extension dl is dW = F dl, so W = ∫₀ˡ (YAl′/L) dl′ = YAl²/(2L) = ½Fl. Dividing by the volume AL gives the energy density u = ½ × (F/A) × (l/L) = ½ × stress × strain = ½ Y (strain)².

Stress = F/A (Pa); strain = ΔL/L, θ or ΔV/V (no unit). Y = FL/(AΔL), K = −PV/ΔV, η_R = F/(Aθ), μ = lateral strain/longitudinal strain. Energy = ½Fl; per unit volume ½ × stress × strain.

Worked example 1: stretching a steel wire

A steel wire 2.0 m long with cross-section 1.0 mm² = 1.0 × 10⁻⁶ m² carries a 10 kg load (g = 9.8 m s⁻², Y = 2.0 × 10¹¹ N m⁻²). Step 1: F = 10 × 9.8 = 98 N. Step 2: stress = F/A = 98/1.0 × 10⁻⁶ = 9.8 × 10⁷ Pa. Step 3: strain = stress/Y = 9.8 × 10⁷/2.0 × 10¹¹ = 4.9 × 10⁻⁴. Step 4: ΔL = strain × L = 4.9 × 10⁻⁴ × 2.0 = 9.8 × 10⁻⁴ m ≈ 0.98 mm. Step 5: energy stored = ½FΔL = ½ × 98 × 9.8 × 10⁻⁴ = 0.048 J. Check with the energy density: ½ × 9.8 × 10⁷ × 4.9 × 10⁻⁴ = 2.4 × 10⁴ J m⁻³; × volume (2.0 × 10⁻⁶ m³) = 0.048 J.

Worked example 2: compressing and shearing

(a) A copper block of volume 1.0 × 10⁻³ m³ is put under an extra pressure of 1.0 × 10⁷ Pa (K = 1.2 × 10¹¹ Pa). Volume strain = −P/K = −1.0 × 10⁷/1.2 × 10¹¹ = −8.3 × 10⁻⁵, so ΔV = −8.3 × 10⁻⁵ × 1.0 × 10⁻³ = −8.3 × 10⁻⁸ m³. (b) An aluminium cube of side 0.10 m (η_R = 2.5 × 10¹⁰ Pa) has a 2000 N force applied along its top face. Shear stress = 2000/0.010 = 2.0 × 10⁵ Pa; angle of shear θ = 2.0 × 10⁵/2.5 × 10¹⁰ = 8.0 × 10⁻⁶ rad; the top face moves x = θh = 8.0 × 10⁻⁶ × 0.10 = 8.0 × 10⁻⁷ m.

Worked example 3: Poisson's ratio

A wire 1.0 m long and 1.0 mm in diameter is stretched by 0.50 mm, and its diameter decreases by 0.000 15 mm. Longitudinal strain = 0.50 mm/1000 mm = 5.0 × 10⁻⁴. Lateral strain = 0.000 15/1.0 = 1.5 × 10⁻⁴. μ = 1.5 × 10⁻⁴/5.0 × 10⁻⁴ = 0.30, a typical value for steel.

Key takeaways

  • Stress is restoring force per unit area (Pa); strain is a fractional change with no unit.
  • Hooke's law: stress ∝ strain up to the proportional limit; beyond the elastic limit the deformation is permanent.
  • Y resists change in length, K resists change in volume (compressibility = 1/K), η_R resists change in shape.
  • Poisson's ratio compares lateral and longitudinal strain.
  • Elastic energy = ½ × force × extension; per unit volume ½ × stress × strain.

Check your understanding

  1. 1. The SI unit of stress is:

    1. joule
    2. N m⁻² (pascal)
    3. N m
    4. it has no unit
    Show answer

    Answer: B. Stress = force/area, so its unit is N m⁻², called the pascal. Strain, not stress, is the quantity with no unit.

  2. 2. Hooke's law states that, within the elastic limit:

    1. stress is inversely proportional to strain
    2. strain is independent of stress
    3. stress equals strain
    4. stress is directly proportional to strain
    Show answer

    Answer: D. For small deformations within the elastic limit, strain is directly proportional to the stress causing it; the constant ratio is the modulus of elasticity.

  3. 3. A wire 3.0 m long with cross-sectional area 2.0 × 10⁻⁶ m² stretches by 1.5 mm under a force of 200 N. Its Young's modulus is:

    1. 2.0 × 10¹¹ N m⁻²
    2. 2.0 × 10⁸ N m⁻²
    3. 5.0 × 10¹¹ N m⁻²
    4. 1.0 × 10¹⁰ N m⁻²
    Show answer

    Answer: A. Y = FL/(AΔL) = 200 × 3.0/(2.0 × 10⁻⁶ × 1.5 × 10⁻³) = 600/(3.0 × 10⁻⁹) = 2.0 × 10¹¹ N m⁻².

  4. 4. In a stretched wire the longitudinal strain is 2.0 × 10⁻³ and the lateral strain is 6.0 × 10⁻⁴. Poisson's ratio is:

    1. 3.3
    2. 1.2 × 10⁻⁶
    3. 0.30
    4. 0.60
    Show answer

    Answer: C. μ = lateral strain/longitudinal strain = 6.0 × 10⁻⁴/2.0 × 10⁻³ = 0.30.

  5. 5. A force of 100 N stretches a wire by 2.0 mm within the elastic limit. The elastic energy stored is:

    1. 0.20 J
    2. 200 J
    3. 0.10 J
    4. 0.050 J
    Show answer

    Answer: C. W = ½Fl = ½ × 100 × 2.0 × 10⁻³ = 0.10 J. The factor ½ appears because the force rises from 0 to 100 N during the stretch.

Privacy · Terms · Refunds · Delivery