• Practice
  • About 22 min
  • 5 practice questions

Fluids at rest: pressure, Pascal's law and buoyancy

Define pressure, density and relative density, derive P = Pa + ρgh, explain the hydrostatic paradox and the hydraulic lift, and apply Archimedes' principle and the law of floatation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define pressure, density and relative density, with units.
  • Derive the pressure at a depth h in a liquid at rest.
  • Explain the hydrostatic paradox and the effects of atmospheric pressure.
  • State Pascal's law and calculate the force multiplication of a hydraulic lift.
  • Use Archimedes' principle and the law of floatation, including the fraction of a floating body that is submerged.

Liquids and gases are fluids: they have no shape of their own and flow when a force acts on them. A liquid has a fixed volume; a gas fills its whole container. A fluid at rest pushes on every surface it touches, always at right angles to that surface.

Pressure, density and relative density

Pressure is the normal force acting per unit area: P = F/A. It is a scalar, with SI unit N m⁻² or pascal (Pa) and dimensions [ML⁻¹T⁻²]. The same force on a smaller area gives a greater pressure. Another unit is the atmosphere: 1 atm = 1.013 × 10⁵ Pa, the pressure of the atmosphere at sea level. Density is mass per unit volume, ρ = m/V, in kg m⁻³ with dimensions [ML⁻³]; liquids are nearly incompressible, so their density hardly changes, while a gas's density changes with pressure. Relative density (specific gravity) is the density of a substance divided by the density of water at 4 °C (1000 kg m⁻³); it has no unit. Mercury, of density 13.6 × 10³ kg m⁻³, has relative density 13.6.

Worked example 1: relative density of a metal sphere

A solid sphere of radius 2.0 cm has a mass of 0.30 kg. Step 1: V = (4/3)πr³ = (4/3) × 3.142 × (2.0 × 10⁻²)³ = 4.189 × 8.0 × 10⁻⁶ = 3.35 × 10⁻⁵ m³. Step 2: ρ = m/V = 0.30/3.35 × 10⁻⁵ = 8.95 × 10³ kg m⁻³. Step 3: relative density = 8950/1000 = 8.95, close to that of copper.

Pressure at a depth

A diver feels the pressure grow with depth; a mountaineer finds it falls with height. Consider a vertical cylinder of water of cross-section A between depths h₁ and h₂ in still water. Forces on it: F₁ = P₁A downwards on its top, F₂ = P₂A upwards on its bottom, and its weight mg downwards, where m = ρA(h₂ − h₁). In equilibrium F₂ = F₁ + mg, so P₂A = P₁A + ρA(h₂ − h₁)g. Cancelling A: P₂ = P₁ + ρg(h₂ − h₁). Take level 1 at the surface (h₁ = 0, P₁ = atmospheric pressure Pₐ) and level 2 at depth h: P = Pₐ + ρgh. If the atmospheric pressure is left out, the pressure due to the liquid column alone is ρgh.

For a given liquid the pressure depends only on the vertical depth, not on the shape or base area of the container. This is the hydrostatic paradox: vessels of quite different shapes, joined at the bottom by a pipe and filled with water, all show the same water level, though they hold different amounts, because the pressure at the same horizontal level must be the same.

Atmospheric pressure is the weight of the air above a place per unit area. It falls with height and also varies with weather. At high altitudes water boils at a lower temperature, so food takes longer to cook, and some people get nosebleeds. A tin from which air is pumped out is crushed by the outside air; a tumbler full of water, covered with a card and turned over, keeps its water because the air pushes up on the card.

Worked example 2: pressure under water

Find the pressure 10 m below the surface of a lake (ρ = 1000 kg m⁻³, g = 9.8 m s⁻², Pₐ = 1.013 × 10⁵ Pa). Step 1: ρgh = 1000 × 9.8 × 10 = 9.8 × 10⁴ Pa. Step 2: P = 1.013 × 10⁵ + 0.98 × 10⁵ = 1.99 × 10⁵ Pa, about 2 atm. Every 10 m of water adds roughly one atmosphere.

Pascal's law and the hydraulic lift

Blaise Pascal noted that the pressure in a fluid at rest is the same at all points at the same height. Pascal's law: if the pressure in a liquid is changed at one point, the change is transmitted to the whole liquid without any loss in magnitude. In a hydraulic lift, two cylinders with pistons of areas A₁ (small) and A₂ (large) are joined by a pipe full of liquid. A force F₁ on the small piston adds pressure P = F₁/A₁, which reaches the large piston undiminished, so F₂ = PA₂ = F₁ × A₂/A₁. The factor A₂/A₁ is the mechanical advantage: the lift is a force multiplier. (The small piston must move further: the volume pushed in equals the volume pushed out, so energy is not multiplied.)

Worked example 3: lifting a car

A hydraulic lift has pistons of diameter 4.0 cm and 40 cm. Step 1: area ratio = (40/4.0)² = 100, since area ∝ diameter². Step 2: a 150 N push on the small piston gives F₂ = 150 × 100 = 15 000 N. Step 3: to hold a 1200 kg car (weight 1200 × 9.8 = 11 760 N) the push needed is 11 760/100 = 117.6 N, about the weight of a 12 kg bag.

Buoyancy, Archimedes' principle and floatation

A body partly or fully immersed in a fluid displaces some fluid, and the fluid pushes up on it. This upward force is the upthrust or buoyant force, and the effect is buoyancy. Archimedes' principle: a body partly or wholly immersed in a fluid experiences an upthrust equal to the weight of the fluid displaced, acting through the centre of gravity of the displaced fluid. Law of floatation: a body floats when the weight of liquid displaced by its immersed part equals the weight of the body. For a floating body, ρ_body V_body g = ρ_fluid V_submerged g, so the fraction submerged = ρ_body/ρ_fluid.

Examples: ice (relative density about 0.9) floats in fresh water with about 90% of its volume under water, and a little less under sea water, which is denser. A person floats more easily in the sea than in a river. A steel ship floats because its hollow shape displaces a large volume of water. A submarine controls its depth with ballast tanks: filled with air, its average density is less than water's and it rises; flooded with water, it sinks; partly filled, it stays at one depth.

Will it sink or float?

  • Average density greater than the fluid
    • Weight exceeds the largest possible upthrust
    • Sinks
    • Example: an iron nail in water
  • Average density equal to the fluid
    • Weight equals the upthrust when fully immersed
    • Stays at any depth
    • Example: a submarine with tanks partly flooded
  • Average density less than the fluid
    • Floats with only part immersed
    • Fraction submerged = ρ_body/ρ_fluid
    • Example: ice, wood, a steel ship

Worked example 4: a floating wooden block

A wooden cube of side 0.20 m floats in water with 0.12 m of its height below the surface. (a) Density: fraction submerged = 0.12/0.20 = 0.60, so ρ_wood = 0.60 × 1000 = 600 kg m⁻³. (b) Extra mass needed to push it just under: the extra volume to be submerged is 0.20 × 0.20 × 0.08 = 3.2 × 10⁻³ m³, which displaces 3.2 × 10⁻³ × 1000 = 3.2 kg of water. So a 3.2 kg mass placed on top makes the cube's top just level with the water.

P = F/A; P = Pₐ + ρgh; hydraulic lift F₂ = F₁A₂/A₁; upthrust = weight of fluid displaced; floating: fraction submerged = ρ_body/ρ_fluid.

Key takeaways

  • Pressure is a scalar; 1 atm = 1.013 × 10⁵ Pa.
  • Pressure in a still liquid grows linearly with depth and does not depend on the vessel's shape.
  • Pascal's law lets a hydraulic lift multiply force by A₂/A₁.
  • Upthrust equals the weight of fluid displaced; a floating body displaces its own weight.

Check your understanding

  1. 1. The pressure due to water alone (ignoring the atmosphere) at a depth of 5.0 m is (ρ = 1000 kg m⁻³, g = 9.8 m s⁻²):

    1. 4.9 × 10⁴ Pa
    2. 4.9 × 10³ Pa
    3. 1.0 × 10⁵ Pa
    4. 5.0 × 10³ Pa
    Show answer

    Answer: A. P = ρgh = 1000 × 9.8 × 5.0 = 4.9 × 10⁴ Pa.

  2. 2. In a hydraulic lift the large piston has 50 times the area of the small one. A force of 200 N on the small piston can support a load of:

    1. 4 N
    2. 250 N
    3. 10 000 N
    4. 200 N
    Show answer

    Answer: C. F₂ = F₁ × A₂/A₁ = 200 × 50 = 10 000 N, by Pascal's law.

  3. 3. Three vessels of different shapes, joined at the bottom, are filled with water to the same level. The pressure at the base of each vessel:

    1. is greatest in the widest vessel
    2. is the same in all three
    3. is greatest in the vessel holding the most water
    4. is least in the narrowest vessel
    Show answer

    Answer: B. Liquid pressure depends only on the depth (P = Pₐ + ρgh), not on the shape or amount of liquid. Same depth, same pressure: this is the hydrostatic paradox.

  4. 4. A body floats in water with three-quarters of its volume submerged. Its density is:

    1. 1333 kg m⁻³
    2. 250 kg m⁻³
    3. 1000 kg m⁻³
    4. 750 kg m⁻³
    Show answer

    Answer: D. For a floating body, fraction submerged = ρ_body/ρ_water. So ρ_body = 0.75 × 1000 = 750 kg m⁻³.

  5. 5. Relative density of a substance has:

    1. the unit kg m⁻³
    2. no unit
    3. the unit N m⁻³
    4. the unit m³ kg⁻¹
    Show answer

    Answer: B. Relative density is the ratio of two densities (the substance's and water's at 4 °C), so the units cancel and it is a pure number.

Privacy · Terms · Refunds · Delivery