• Practice
  • About 26 min
  • 5 practice questions

Acidity of carboxylic acids and their functional derivatives

Use Ka and pKa to compare acid strengths, explain substituent effects, rank acid derivatives by reactivity, and write the preparation and reactions of acid chlorides, anhydrides, esters and amides, with uses.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Calculate Ka from pKa (and the reverse) and rank acids by strength.
  • Explain how electron-releasing and electron-withdrawing groups change acidity.
  • Order acid chlorides, anhydrides, esters and amides by reactivity, giving two reasons.
  • Write the main preparations and reactions of each derivative, including Claisen condensation and Hoffmann degradation.

Carboxylic acids are the most acidic common organic compounds. This lesson asks why, and then studies the compounds made by replacing the –OH of the acid by another group: the functional derivatives.

Why carboxylic acids are acidic

In water, RCOOH + H₂O ⇌ RCOO⁻ + H₃O⁺. The carboxylate ion is stabilised by resonance: the negative charge is shared equally between the two oxygens, and both C–O bonds become the same length. An alkoxide ion RO⁻ has no such sharing, which is why acids are far stronger than alcohols.

Ka = [RCOO⁻][H₃O⁺] / [RCOOH]; pKa = −log Ka. Stronger acid: larger Ka, smaller pKa.

— Acid dissociation constant
pKa values as given in the textbook
AcidpKa (298 K)
Trichloroacetic acid, Cl₃CCOOH0.64
Dichloroacetic acid, Cl₂CHCOOH1.26
Fluoroacetic acid, FCH₂COOH2.59
Chloroacetic acid, ClCH₂COOH2.87
Bromoacetic acid, BrCH₂COOH2.90
Iodoacetic acid, ICH₂COOH3.17
Formic acid, HCOOH3.75
Benzoic acid, C₆H₅COOH4.20
Acetic acid, CH₃COOH4.76
Propionic acid, CH₃CH₂COOH4.88

Worked example 1: from pKa to Ka

Find Ka for acetic acid (pKa 4.76) and chloroacetic acid (pKa 2.87), and compare them. Working: Ka = 10^(−pKa). Acetic acid: 10^(−4.76) = 10^(0.24) × 10⁻⁵ = 1.74 × 10⁻⁵. Chloroacetic acid: 10^(−2.87) = 10^(0.13) × 10⁻³ = 1.35 × 10⁻³. Ratio = (1.35 × 10⁻³) ÷ (1.74 × 10⁻⁵) = 77.6, so chloroacetic acid is about 78 times stronger. Shortcut: the pKa difference is 1.89, and 10^1.89 ≈ 78.

Effect of substituents

  • Electron-releasing (+I) groups decrease acidity: alkyl groups push electron density into the carboxylate, increasing its negative charge and destabilising it. Order: HCOOH > CH₃COOH > CH₃CH₂COOH.
  • Electron-withdrawing (−I) groups increase acidity: they spread out the negative charge and stabilise the anion. The more electronegative the halogen, the stronger the acid: FCH₂COOH > ClCH₂COOH > BrCH₂COOH > ICH₂COOH.
  • More withdrawing groups, stronger acid: Cl₃CCOOH > Cl₂CHCOOH > ClCH₂COOH > CH₃COOH.
  • Order of withdrawing power given in the textbook: –NO₂ > –CN > –F > –Cl > –Br > –I > –C₆H₅.

Relative acidity: RCOOH > ArOH (phenols) > H₂O > ROH > RC≡CH.

Worked example 2: the pH of a weak acid solution

Estimate the pH of 0.10 M acetic acid (Ka = 1.74 × 10⁻⁵). Working: for a weak acid with little ionisation, [H₃O⁺] ≈ √(Ka × c) = √(1.74 × 10⁻⁵ × 0.10) = √(1.74 × 10⁻⁶) = 1.32 × 10⁻³ M. pH = −log(1.32 × 10⁻³) = 3 − 0.12 = 2.88. The degree of ionisation is 1.32 × 10⁻³ ÷ 0.10 = 0.013, only about 1.3%, so the approximation is fair.

Functional derivatives and their reactivity

The four functional derivatives of carboxylic acids
–OH replaced byDerivativeGeneral formulaExample (IUPAC name)
–ClAcid chlorideRCOClCH₃COCl, ethanoyl chloride
–OCORAcid anhydride(RCO)₂O(CH₃CO)₂O, ethanoic anhydride
–OR′EsterRCOOR′CH₃COOC₂H₅, ethyl ethanoate
–NH₂AmideRCONH₂CH₃CONH₂, ethanamide

Reactivity of acid derivatives towards nucleophiles

  1. Acid chloride
  2. Acid anhydride
  3. Ester
  4. Amide
Most reactive on the left. Leaving-group basicity rises from Cl⁻ to NH₂⁻, and so does resonance donation into C=O.

Two reasons explain the order. (i) Leaving group: weak bases leave easily. Basicity rises in the order Cl⁻ < RCOO⁻ < RO⁻ < NH₂⁻, so reactivity falls in that order. (ii) Resonance: the less electronegative the atom joined to C=O, the more readily it shares its lone pair with the carbonyl, stabilising the molecule and lowering its reactivity. Electronegativity falls Cl > OCOR > OR > NH₂, so amides are the most stabilised and least reactive.

Acid chlorides

Prepared from the acid with PCl₅, PCl₃ or, best, SOCl₂: CH₃COOH + SOCl₂ → CH₃COCl + SO₂ + HCl. The by-products are gases that escape, leaving pure acid chloride. Acid chlorides fume in moist air (HCl forms) and are hydrolysed by water. With water they give the acid; with alcohols, esters; with ammonia, amides; with primary and secondary amines, N-alkyl and N,N-dialkyl amides (each time HCl is the other product). H₂ over Pd/BaSO₄ gives the aldehyde (Rosenmund), and LiAlH₄ gives the primary alcohol.

Acid anhydrides

Made by heating the acid with P₂O₅, or from an acid chloride and a sodium carboxylate: CH₃COCl + CH₃COONa → (CH₃CO)₂O + NaCl. They are hydrolysed slowly by water to two acid molecules, and react with alcohols to give an ester plus acid, with ammonia to give an amide plus acid, and with PCl₅ to give two acid chlorides: (CH₃CO)₂O + PCl₅ → 2CH₃COCl + POCl₃. Because they react more gently than acid chlorides and give no corrosive HCl, anhydrides are often preferred for acetylation.

Esters

Esters are made by esterification (driven forward by using excess of one reactant or removing the water) or from an acid chloride or anhydride and an alcohol. They are colourless liquids or solids with fruity smells; the textbook lists amyl acetate (banana), ethyl butyrate (pineapple), octyl acetate (orange), isobutyl formate (raspberry) and amyl butyrate (apricot).

  • Hydrolysis gives the acid and alcohol (acid catalysed, reversible).
  • Transesterification: with another alcohol and acid catalyst the alcohol parts swap: CH₃COOC₂H₅ + C₃H₇OH ⇌ CH₃COOC₃H₇ + C₂H₅OH. Used to make esters of higher alcohols from those of lower ones.
  • Ammonolysis: CH₃COOC₂H₅ + NH₃ → CH₃CONH₂ + C₂H₅OH (slow).
  • Claisen condensation: an ester with an α-H and sodium ethoxide condenses with itself to a β-keto ester: 2CH₃COOC₂H₅ → CH₃COCH₂COOC₂H₅ (ethyl acetoacetate) + C₂H₅OH.
  • PCl₅ gives an acid chloride and an alkyl chloride: CH₃COOC₂H₅ + PCl₅ → CH₃COCl + C₂H₅Cl + POCl₃.

Amides

Made by ammonolysis of acid chlorides or anhydrides, by heating ammonium carboxylates (CH₃COONH₄ → CH₃CONH₂ + H₂O), or by partial hydrolysis of nitriles with cold concentrated HCl. Amides are amphoteric: as a base, acetamide forms CH₃CONH₃⁺Cl⁻ with HCl; as an acid, 2CH₃CONH₂ + 2Na → 2CH₃CONHNa + H₂. Prolonged heating with acid gives the acid and NH₄Cl, and with NaOH gives the sodium salt and NH₃. P₂O₅ dehydrates an amide to a nitrile (CH₃CONH₂ → CH₃CN + H₂O), and LiAlH₄ reduces it to an amine (CH₃CONH₂ + 4[H] → CH₃CH₂NH₂ + H₂O).

Hoffmann degradation: RCONH₂ + Br₂ + 4KOH → RNH₂ + K₂CO₃ + 2KBr + 2H₂O; the amine has one carbon fewer than the amide.

— Hoffmann bromamide degradation

Worked example 3: checking the Hoffmann equation

For acetamide: CH₃CONH₂ + Br₂ + 4KOH → CH₃NH₂ + K₂CO₃ + 2KBr + 2H₂O. Working: C 2 = 1 + 1; H 5 + 4 = 9 and 5 + 4 = 9; N 1 = 1; O 1 + 4 = 5 and 3 + 2 = 5; K 4 = 2 + 2; Br 2 = 2. Balanced. Ethanamide (2 C) gives methanamine (1 C): the carbonyl carbon leaves as carbonate.

Uses

Uses of carboxylic acids and derivatives
CompoundUses listed in the textbook
Formic acidDehydrating hides; coagulating rubber latex; preserving fruit juice as an antiseptic; has been used in medicine for gout
Acetic acidTable vinegar; coagulating rubber latex; making cellulose acetate and polyvinyl acetate
Benzoic acidFood preservative (as the acid or sodium benzoate); urinary antiseptic in medicine; dyes
Acetyl chlorideAcetylating agent; detecting and estimating –OH and –NH₂ groups
Acetic anhydrideAcetylating agent; making aspirin and phenacetin; cellulose acetate and polyvinyl acetate
Ethyl acetateArtificial fruit essences; solvent for lacquers; making ethyl acetoacetate

Key takeaways: stronger acid = larger Ka = smaller pKa; −I groups strengthen and +I groups weaken an acid. Reactivity: acid chloride > anhydride > ester > amide. SOCl₂ gives pure acid chlorides; Claisen condensation gives β-keto esters; Hoffmann degradation removes one carbon to give an amine.

Check your understanding

  1. 1. Which acid is the strongest?

    1. CH₃COOH
    2. ClCH₂COOH
    3. Cl₂CHCOOH
    4. FCH₂COOH
    Show answer

    Answer: C. Two chlorine atoms withdraw more electron density than one fluorine or one chlorine, so the carboxylate of Cl₂CHCOOH is the most stabilised. The textbook's pKa values agree: 1.26 for Cl₂CHCOOH against 2.59 (FCH₂COOH), 2.87 (ClCH₂COOH) and 4.76 (CH₃COOH).

  2. 2. An acid has pKa = 4.20. What is its Ka?

    1. 4.20 × 10⁻⁴
    2. 6.31 × 10⁻⁵
    3. 1.58 × 10⁻⁴
    4. 6.31 × 10⁻⁴
    Show answer

    Answer: B. Ka = 10^(−4.20) = 10^(0.80) × 10⁻⁵ = 6.31 × 10⁻⁵. This is benzoic acid's value.

  3. 3. Which is the correct order of reactivity towards nucleophiles?

    1. Amide > ester > anhydride > acid chloride
    2. Ester > acid chloride > amide > anhydride
    3. Anhydride > acid chloride > ester > amide
    4. Acid chloride > anhydride > ester > amide
    Show answer

    Answer: D. Cl⁻ is the weakest base and best leaving group, and Cl shares its lone pair least with C=O, so acid chlorides are most reactive; NH₂⁻ is the strongest base and N shares its lone pair most, so amides are least reactive.

  4. 4. Ethyl ethanoate is treated with sodium ethoxide. What is the organic product besides ethanol?

    1. Ethyl acetoacetate
    2. Ethanamide
    3. Ethanoyl chloride
    4. Butanoic acid
    Show answer

    Answer: A. This is Claisen condensation: an ester with α-hydrogens condenses with itself in strong base to give the β-keto ester CH₃COCH₂COOC₂H₅, ethyl acetoacetate.

  5. 5. Propanamide, CH₃CH₂CONH₂, is warmed with Br₂ and KOH. What is the organic product?

    1. Propanamine
    2. Ethanamine
    3. Propanenitrile
    4. Propanoic acid
    Show answer

    Answer: B. In Hoffmann degradation the amine has one carbon fewer than the amide: CH₃CH₂CONH₂ → CH₃CH₂NH₂, ethanamine. The carbonyl carbon leaves as K₂CO₃.

Privacy · Terms · Refunds · Delivery