• Practice
  • About 26 min
  • 5 practice questions

Carboxylic acids: naming, structure, preparation and reactions

Name carboxylic acids, explain the resonance in the carboxyl group, prepare acids by six methods, explain their boiling points, and write their reactions at O–H, C–OH, the –COOH group and the chain.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Give IUPAC names of mono- and dicarboxylic acids.
  • Explain why the carboxyl carbon is less electrophilic than a carbonyl carbon.
  • Prepare carboxylic acids from alcohols, nitriles, esters, Grignard reagents, acid derivatives and alkylbenzenes.
  • Write the reactions of carboxylic acids grouped by the bond that breaks, and give the tests for –COOH.

A carboxylic acid contains the carboxyl group –COOH, a carbonyl and a hydroxyl group on the same carbon. Acids may be aliphatic (R–COOH) or aromatic (Ar–COOH). The long-chain acids from about C₁₂ to C₁₈ occur in fats and oils as esters of glycerol and are called fatty acids.

Naming carboxylic acids

Replace the final -e of the alkane by -oic acid; the –COOH carbon is C1. With two –COOH groups the ending is -dioic acid and the -e is kept.

Names of some carboxylic acids (the textbook also writes these as ethane-1,2-dioic acid and so on)
Common nameFormulaIUPAC name
Formic acidHCOOHMethanoic acid
Acetic acidCH₃COOHEthanoic acid
Isobutyric acid(CH₃)₂CHCOOH2-Methylpropanoic acid
Phenylacetic acidC₆H₅CH₂COOH2-Phenylethanoic acid
Oxalic acidHOOC–COOHEthanedioic acid
Malonic acidHOOC–CH₂–COOHPropanedioic acid
Succinic acidHOOC–(CH₂)₂–COOHButanedioic acid
Glutaric acidHOOC–(CH₂)₃–COOHPentanedioic acid
Adipic acidHOOC–(CH₂)₄–COOHHexanedioic acid

Structure of the carboxyl group

The –COOH group is planar. The carbon and both oxygens are sp²; three σ bonds come from carbon's sp² orbitals, and the three parallel unhybridised p orbitals on C, O and O overlap to give a π system spread over O=C–O. In resonance terms, RCOOH is a hybrid of R–C(=O)–OH and R–C(–O⁻)=O⁺H. Because the lone pair of the –OH oxygen is shared with the C=O, the carboxyl carbon is less electrophilic than the carbonyl carbon of an aldehyde or ketone. That is why carboxylic acids do not give the usual addition reactions of C=O (no oxime, no cyanohydrin, no bisulphite compound).

Methods of preparation

  • Oxidation of primary alcohols and aldehydes with KMnO₄ or acidified K₂Cr₂O₇: CH₃CH₂OH → CH₃CHO → CH₃COOH.
  • Hydrolysis of nitriles with acid or alkali: CH₃CN + 2H₂O → CH₃COOH + NH₃ (in acid the NH₃ appears as NH₄⁺).
  • Acid hydrolysis of esters: CH₃COOC₂H₅ + H₂O ⇌ CH₃COOH + C₂H₅OH.
  • Grignard reagent and CO₂ (dry ice): CH₃MgBr + CO₂ → CH₃COOMgBr, then acid gives CH₃COOH + Mg(OH)Br. The chain grows by one carbon, so methanoic acid cannot be made this way. C₆H₅MgBr gives benzoic acid.
  • Hydrolysis of acid chlorides and anhydrides: CH₃COCl + H₂O → CH₃COOH + HCl; (CH₃CO)₂O + H₂O → 2CH₃COOH.
  • Oxidation of alkylbenzenes: strong KMnO₄ or chromic acid oxidises the whole side chain, whatever its length, to a single –COOH on the ring: toluene, ethylbenzene and propylbenzene all give benzoic acid.

Worked example 1: planning a synthesis

Make propanoic acid from bromoethane in two different ways. Working: route 1, nitrile: CH₃CH₂Br + KCN → CH₃CH₂CN + KBr, then hydrolysis CH₃CH₂CN + 2H₂O → CH₃CH₂COOH + NH₃. Route 2, Grignard: CH₃CH₂Br + Mg (dry ether) → CH₃CH₂MgBr; add CO₂ to get CH₃CH₂COOMgBr; acidify to get CH₃CH₂COOH. Both routes add exactly one carbon to the two-carbon halide, giving a three-carbon acid.

Physical properties

Aliphatic acids up to about nine carbons are colourless liquids with sharp smells; higher members are odourless, wax-like solids. Acids boil higher than alcohols of similar molar mass, because two molecules hold each other by two hydrogen bonds, forming a dimer, which persists even in the vapour. Acids up to four carbons mix with water; larger ones are insoluble because the hydrocarbon part dominates, and benzoic acid is only slightly soluble in cold water. Vinegar is a dilute solution of acetic acid (6-8% according to the textbook); pure acetic acid freezes at about 290 K into ice-like crystals and is called glacial acetic acid, which is purified by repeatedly freezing it and draining off the liquid water.

Reactions, grouped by the bond that breaks

Reactions of carboxylic acids

  • O–H bond breaks
    • Active metals give salt + H₂
    • Alkalis give salt + water
    • Carbonates and hydrogencarbonates give CO₂
    • Blue litmus turns red
  • C–OH bond breaks
    • PCl₅, PCl₃ or SOCl₂ give acid chlorides
    • Alcohols + H⁺ give esters
  • –COOH group reacts
    • LiAlH₄ reduces to RCH₂OH
    • HI + red P reduces to alkane
    • Soda lime removes CO₂
    • Kolbe electrolysis
    • NH₃ then heat gives amide
    • P₂O₅ gives anhydride
  • Chain or ring reacts
    • HVZ α-halogenation
    • Meta substitution in benzoic acid
  • Metals and bases: 2CH₃COOH + 2Na → 2CH₃COONa + H₂; CH₃COOH + NaOH → CH₃COONa + H₂O; 2CH₃COOH + Na₂CO₃ → 2CH₃COONa + H₂O + CO₂ (brisk effervescence).
  • Acid chlorides: CH₃COOH + PCl₅ → CH₃COCl + POCl₃ + HCl; C₆H₅COOH + SOCl₂ → C₆H₅COCl + SO₂ + HCl.
  • Esterification: heating with an alcohol and concentrated H₂SO₄ (or dry HCl) gives an ester reversibly: C₆H₅COOH + C₂H₅OH ⇌ C₆H₅COOC₂H₅ + H₂O. Mechanism: H⁺ protonates the C=O oxygen; the alcohol oxygen attacks the carbon; a proton moves to an –OH, which leaves as water; the ester loses H⁺.
  • Reduction: LiAlH₄ (or H₂ over copper chromite) gives a primary alcohol, CH₃COOH + 4[H] → CH₃CH₂OH + H₂O; NaBH₄ does not reduce –COOH. With HI and red phosphorus at about 473 K the acid is reduced right to the alkane: CH₃COOH + 6HI → CH₃CH₃ + 2H₂O + 3I₂.
  • Decarboxylation: the sodium salt heated with soda lime (NaOH and CaO, 3 : 1) loses CO₂: CH₃COONa + NaOH → CH₄ + Na₂CO₃.
  • Kolbe electrolysis: electrolysis of aqueous sodium ethanoate gives ethane at the anode: 2CH₃COONa + 2H₂O → CH₃CH₃ + 2CO₂ + 2NaOH + H₂ (H₂ at the cathode). Sodium methanoate gives hydrogen instead.
  • Ammonia: CH₃COOH + NH₃ → CH₃COONH₄, which on strong heating gives CH₃CONH₂ + H₂O.
  • Dehydration: heating with P₂O₅: 2CH₃COOH → (CH₃CO)₂O + H₂O.
  • Hell-Volhard-Zelinsky (HVZ) reaction: an acid with an α-H and Cl₂ or Br₂ with a little red phosphorus is halogenated at the α-carbon: CH₃COOH → ClCH₂COOH. An acid with no α-H, such as (CH₃)₃CCOOH, does not react.
  • Ring reactions of benzoic acid: –COOH is deactivating and meta-directing: Br₂/FeBr₃ gives m-bromobenzoic acid, nitrating mixture gives m-nitrobenzoic acid, fuming H₂SO₄ gives m-sulphobenzoic acid. Benzoic acid does not undergo Friedel-Crafts reactions because the ring is too deactivated.

Worked example 2: atom check and soda-lime calculation

Check CH₃COOH + 6HI → CH₃CH₃ + 2H₂O + 3I₂. Working: C 2 = 2; H 4 + 6 = 10 and 6 + 4 = 10; O 2 = 2; I 6 = 6: balanced. Now, what volume of methane at STP comes from 8.2 g of sodium ethanoate with soda lime? CH₃COONa = 24 + 3 + 32 + 23 = 82 g mol⁻¹, so 8.2 ÷ 82 = 0.100 mol, giving 0.100 mol CH₄. At STP (22.4 L mol⁻¹) the volume is 0.100 × 22.4 = 2.24 L.

Methanoic acid is a reducing agent

Methanoic acid, H–COOH, contains an aldehyde-like H–C=O unit as well as the acid group, so it reduces Tollens' reagent to silver and Fehling's solution to red Cu₂O: HCOO⁻ + 2Ag⁺ + 3OH⁻ → 2Ag + CO₃²⁻ + 2H₂O. Other acids do not.

Tests for –COOH: blue litmus turns red; brisk effervescence of CO₂ with NaHCO₃; warming with an alcohol and concentrated H₂SO₄ gives an ester with a fruity smell.

Key takeaways: resonance makes the carboxyl carbon less electrophilic, so acids do not give carbonyl addition reactions. Grignard + CO₂ and nitrile hydrolysis add one carbon; side-chain oxidation always ends at benzoic acid. Hydrogen-bonded dimers give acids high boiling points. Soda lime and Kolbe electrolysis remove CO₂; HVZ needs an α-H.

Check your understanding

  1. 1. What is the IUPAC name of HOOC–CH₂–CH₂–COOH?

    1. Butanedioic acid
    2. Propanedioic acid
    3. Butanoic acid
    4. Succinic dioic acid
    Show answer

    Answer: A. There are four carbons in the chain including both –COOH carbons, so the parent is butane; two acid groups give -dioic acid: butanedioic acid (common name succinic acid).

  2. 2. Which method cannot be used to prepare methanoic acid?

    1. Hydrolysis of methyl methanoate
    2. Oxidation of methanol
    3. Hydrolysis of HCN to the acid
    4. Carbonation of a Grignard reagent followed by acidification
    Show answer

    Answer: D. A Grignard reagent R–MgX adds its carbon group R to CO₂, so the product RCOOH always has at least two carbons. Methanoic acid has one carbon, so it cannot be made by this route.

  3. 3. Why do carboxylic acids have higher boiling points than alcohols of similar molar mass?

    1. They are ionic compounds
    2. Two acid molecules are joined by two hydrogen bonds, forming dimers
    3. They have only dipole-dipole forces
    4. Their molar masses are always much larger
    Show answer

    Answer: B. An acid molecule can both give and accept hydrogen bonds through –COOH, so pairs of molecules form cyclic dimers held by two hydrogen bonds. More energy is needed to separate them than to separate alcohol molecules.

  4. 4. What volume of CO₂ at STP is evolved when 6.0 g of ethanoic acid reacts with excess sodium hydrogencarbonate? (CH₃COOH = 60 g mol⁻¹)

    1. 1.12 L
    2. 4.48 L
    3. 2.24 L
    4. 22.4 L
    Show answer

    Answer: C. CH₃COOH + NaHCO₃ → CH₃COONa + H₂O + CO₂: one mole of CO₂ per mole of acid. Moles of acid = 6.0 ÷ 60 = 0.10 mol, so 0.10 mol CO₂ = 0.10 × 22.4 = 2.24 L.

  5. 5. Which acid does NOT undergo the Hell-Volhard-Zelinsky reaction?

    1. Ethanoic acid
    2. Propanoic acid
    3. 2-Methylpropanoic acid
    4. 2,2-Dimethylpropanoic acid
    Show answer

    Answer: D. HVZ halogenates the α-carbon, so it needs an α-hydrogen. In (CH₃)₃C–COOH the α-carbon carries three methyl groups and no H. The other three acids each have at least one α-H.

Privacy · Terms · Refunds · Delivery