• Practice
  • About 24 min
  • 5 practice questions

Naming, structure and preparation of aldehydes and ketones

Name aldehydes and ketones by IUPAC rules, explain the sp² planar polar carbonyl group, and choose a method to prepare a given aldehyde or ketone, with balanced equations.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write IUPAC names for common aldehydes and ketones and draw a structure from a name.
  • Describe the bonding in the carbonyl group: sp² carbon, one σ and one π bond, bond angles near 120°, and its polarity.
  • Prepare aldehydes and ketones by general methods, by methods that give only aldehydes, and by methods for benzaldehyde and ketones.
  • Explain the boiling points and solubility of aldehydes and ketones.

The carbonyl group, C=O, is found in sugars, proteins, vitamins and many medicines and plastics. When the carbonyl carbon carries at least one hydrogen the compound is an aldehyde (–CHO); when it is joined to two carbon groups it is a ketone (R–CO–R′). This unit of the Tamil Nadu textbook first studies these two families and then the carboxylic acids (–COOH).

Naming aldehydes and ketones

Use the IUPAC rules you learnt in Class 11. Pick the longest chain that contains the carbonyl carbon, replace the final -e of the alkane by -al for an aldehyde or -one for a ketone, and number the chain so that the carbonyl carbon gets the lowest number. In an aldehyde the –CHO carbon is always carbon 1, so its number is not written. Double bonds are shown as -en-, and substituents are prefixes with position numbers.

Common and IUPAC names of some carbonyl compounds
Common nameFormulaIUPAC name
FormaldehydeHCHOMethanal
AcetaldehydeCH₃CHOEthanal
AcroleinCH₂=CH–CHOProp-2-enal
CrotonaldehydeCH₃–CH=CH–CHOBut-2-enal
BenzaldehydeC₆H₅CHOBenzaldehyde (phenylmethanal)
Acetone (dimethyl ketone)CH₃COCH₃Propanone
Mesityl oxide(CH₃)₂C=CHCOCH₃4-Methylpent-3-en-2-one
Acetophenone (methyl phenyl ketone)C₆H₅COCH₃1-Phenylethan-1-one
Benzophenone (diphenyl ketone)C₆H₅COC₆H₅Diphenylmethanone

Worked example 1: naming a hydroxy aldehyde

Name (CH₃)₂C(OH)CH₂CHO. Working: the chain through the –CHO carbon has four carbons: C1 = CHO, C2 = CH₂, C3 = C(OH)(CH₃), C4 = one of the CH₃ groups. The parent is butanal. Carbon 3 carries an –OH and a –CH₃. Prefixes in alphabetical order: hydroxy before methyl. Name: 3-hydroxy-3-methylbutanal.

Worked example 2: carbonyl isomers of C₄H₈O

Working: four carbons and one C=O. Aldehydes: a straight chain gives CH₃CH₂CH₂CHO, butanal; a branched chain gives (CH₃)₂CHCHO, 2-methylpropanal. Ketone: the C=O must be inside the chain, CH₃COCH₂CH₃, butanone (no number is needed, because butan-2-one is the only possible butanone). So there are three carbonyl isomers; butanal and 2-methylpropanal are chain isomers, and both are functional isomers of butanone.

Structure of the carbonyl group

The carbonyl carbon is sp² hybridised. Its three sp² orbitals form three σ bonds, one to oxygen and two to H or C atoms, all in one plane at about 120°. The unhybridised 2p orbital of carbon, perpendicular to that plane, overlaps sideways with a 2p orbital of oxygen to give the π bond. Oxygen also keeps two lone pairs. Oxygen is much more electronegative than carbon, so the shared electrons are pulled towards it: the bond is polar, Cδ⁺=Oδ⁻. This polarity is the key to almost every reaction in the next two lessons, because the δ⁺ carbon is attacked by nucleophiles.

C=O: sp² carbon, trigonal planar (about 120°), one σ + one π bond, polar Cδ⁺–Oδ⁻; nucleophiles attack carbon, electrophiles (such as H⁺) attach to oxygen.

General methods of preparation

  • Oxidation of alcohols: a primary alcohol gives an aldehyde and a secondary alcohol a ketone. PCC (pyridinium chlorochromate) stops at the aldehyde; acidified dichromate or KMnO₄ can carry an aldehyde on to the acid.
  • Catalytic dehydrogenation: alcohol vapour over heated Cu or Ag loses H₂: CH₃CH₂OH → CH₃CHO + H₂.
  • Reductive ozonolysis of alkenes: O₃ forms an ozonide, which Zn and water split into two carbonyl compounds; zinc removes the H₂O₂ formed, which would otherwise oxidise the products. A terminal alkene (=CH₂) gives methanal as one product.
  • Hydration of alkynes: with dilute H₂SO₄ and HgSO₄, water adds to the triple bond; the enol formed rearranges. Ethyne gives ethanal; every other alkyne gives a ketone (propyne gives propanone).
  • Dry distillation of calcium salts: calcium ethanoate alone gives propanone, (CH₃COO)₂Ca → CH₃COCH₃ + CaCO₃; with calcium methanoate an aldehyde forms, (CH₃COO)₂Ca + (HCOO)₂Ca → 2CH₃CHO + 2CaCO₃.

Worked example 3: predicting ozonolysis products

What does pent-2-ene, CH₃–CH=CH–CH₂CH₃, give on reductive ozonolysis? Working: cut the C=C and put an =O on each carbon that was doubly bonded. Left part: CH₃–CH=O, ethanal. Right part: O=CH–CH₂CH₃, propanal. Check carbons: 2 + 3 = 5, as in the alkene.

Methods for aldehydes only, for benzaldehyde and for ketones

  • Rosenmund reduction: RCOCl + H₂ → RCHO + HCl over Pd on BaSO₄. BaSO₄ 'poisons' the catalyst so the aldehyde is not reduced further to an alcohol. Methanal and ketones cannot be made this way.
  • Stephen's reaction: an alkyl cyanide is reduced by SnCl₂/HCl to an imine, which water hydrolyses to the aldehyde: CH₃CN → CH₃CH=NH → CH₃CHO + NH₃.
  • DIBAL-H: diisobutylaluminium hydride reduces a nitrile selectively to the imine stage; hydrolysis then gives the aldehyde, and a C=C elsewhere in the chain is left alone.
  • Etard reaction: toluene with chromyl chloride (CrO₂Cl₂, in CS₂) forms a complex that is hydrolysed to benzaldehyde. CrO₃ in acetic anhydride does the same through benzylidene diacetate. Strong KMnO₄ would go all the way to benzoic acid.
  • Gattermann-Koch reaction: benzene with CO and HCl in the presence of anhydrous AlCl₃/CuCl gives benzaldehyde, a variant of Friedel-Crafts acylation.
  • From toluene commercially: side-chain chlorination in light gives benzal chloride, C₆H₅CHCl₂, which water at about 373 K hydrolyses to benzaldehyde.
  • Ketones from dialkylcadmium: 2CH₃COCl + (CH₃)₂Cd → 2CH₃COCH₃ + CdCl₂.
  • Friedel-Crafts acylation: benzene + CH₃COCl with anhydrous AlCl₃ gives acetophenone; with C₆H₅COCl it gives benzophenone. It works only with benzene and activated rings.

Routes to carbonyl compounds

  • Both aldehydes and ketones
    • Oxidation or dehydrogenation of alcohols
    • Ozonolysis of alkenes
    • Hydration of alkynes
    • Dry distillation of calcium salts
  • Aldehydes only
    • Rosenmund reduction of RCOCl
    • Stephen's reaction of RCN
    • DIBAL-H reduction of RCN
  • Benzaldehyde
    • Etard reaction
    • Gattermann-Koch reaction
    • Benzal chloride hydrolysis
  • Ketones
    • Acid chloride + dialkylcadmium
    • Friedel-Crafts acylation

Worked example 4: a dry-distillation calculation

How much propanone can 15.8 g of calcium ethanoate give? (Ca = 40, C = 12, H = 1, O = 16.) Working: molar mass of (CH₃COO)₂Ca = 40 + 2 × (2×12 + 3×1 + 2×16) = 40 + 2 × 59 = 158 g mol⁻¹, so moles = 15.8 ÷ 158 = 0.100 mol. One mole of salt gives one mole of propanone (C₃H₆O, 3×12 + 6 + 16 = 58 g mol⁻¹). Mass = 0.100 × 58 = 5.8 g, if the yield were complete.

Physical properties

Methanal is a gas at room temperature and ethanal a very volatile liquid; the other members up to about C₁₁ are colourless liquids and higher ones are solids. Aldehydes and ketones boil higher than alkanes and ethers of similar molar mass because their polar C=O groups attract one another (dipole-dipole forces), but lower than alcohols and acids, which form intermolecular hydrogen bonds. The lower members (methanal, ethanal, propanone) mix with water in all proportions because water hydrogen-bonds to the carbonyl oxygen; solubility falls quickly as the carbon chain grows. The polar C=O also gives these compounds large dipole moments.

Boiling points of compounds of similar molar mass (values as in the textbook)
CompoundMolar mass (g mol⁻¹)Boiling point (K)Main attraction
Pentane72309Dispersion forces only
Butanal72349Dipole-dipole
Butanone72353Dipole-dipole
Butan-1-ol74391Hydrogen bonding
Propanoic acid74414Strong hydrogen bonding (dimers)

Key takeaways: aldehydes end in -al, ketones in -one. The carbonyl carbon is sp², planar and δ⁺. Rosenmund, Stephen and DIBAL-H give only aldehydes; Etard and Gattermann-Koch give benzaldehyde; Friedel-Crafts acylation gives aryl ketones. Dipole-dipole forces put aldehyde and ketone boiling points between those of alkanes and alcohols.

Check your understanding

  1. 1. What is the IUPAC name of CH₃–CH=CH–CHO?

    1. But-3-enal
    2. But-2-enal
    3. Butanal
    4. But-2-en-1-one
    Show answer

    Answer: B. The –CHO carbon is C1, so the chain is numbered from it: C1 CHO, C2 CH=, C3 =CH, C4 CH₃. The double bond starts at C2, so the name is but-2-enal. But-3-enal would number from the wrong end, and -one is for ketones.

  2. 2. In Rosenmund reduction, why is the palladium catalyst supported on barium sulphate?

    1. To speed up the reduction of the aldehyde to an alcohol
    2. To supply the hydrogen needed for the reaction
    3. To poison the catalyst partly so that the aldehyde is not reduced further
    4. To convert the acid chloride into an acid first
    Show answer

    Answer: C. BaSO₄ acts as a catalytic poison: it lowers the activity of Pd so that the reduction stops at RCHO instead of continuing to RCH₂OH.

  3. 3. Which alkyne gives an aldehyde, not a ketone, on hydration with dilute H₂SO₄ and HgSO₄?

    1. Propyne
    2. But-1-yne
    3. But-2-yne
    4. Ethyne
    Show answer

    Answer: D. Water adds so that the –OH goes to the more substituted carbon (Markovnikov). Only for ethyne, HC≡CH, is that carbon a CH, so the enol CH₂=CHOH rearranges to ethanal. Every other alkyne gives a ketone, for example propyne gives propanone.

  4. 4. Which reaction converts toluene into benzaldehyde?

    1. Etard reaction with chromyl chloride
    2. Oxidation with hot alkaline KMnO₄
    3. Clemmensen reduction
    4. Rosenmund reduction
    Show answer

    Answer: A. Chromyl chloride (CrO₂Cl₂) oxidises the methyl group only to the aldehyde stage through a complex that is then hydrolysed: this is the Etard reaction. Hot KMnO₄ goes all the way to benzoic acid; the other two are reductions.

  5. 5. Butanal (M = 72) boils at 349 K while pentane (M = 72) boils at 309 K. What explains the difference?

    1. Butanal molecules form hydrogen bonds with one another
    2. Butanal molecules attract one another through dipole-dipole forces of their polar C=O groups
    3. Pentane has a larger molar mass
    4. Butanal exists as dimers in the liquid
    Show answer

    Answer: B. Butanal has no O–H, so it cannot hydrogen-bond to itself; its polar C=O groups attract each other by dipole-dipole forces, which pentane lacks. The molar masses are equal, and dimers are typical of carboxylic acids.

Privacy · Terms · Refunds · Delivery