• Practice
  • About 25 min
  • 5 practice questions

Nucleophilic addition, oxidation and reduction of aldehydes and ketones

Explain the nucleophilic addition mechanism, write the products with HCN, NaHSO₃, alcohols, ammonia and its derivatives, and apply oxidation, reduction and the haloform reaction.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Draw the steps of nucleophilic addition to C=O and explain why aldehydes react faster than ketones.
  • Write the products of addition of HCN, NaHSO₃, alcohols, ammonia and ammonia derivatives (H₂N–G).
  • Predict the acids formed when an aldehyde or ketone is oxidised, using Popoff's rule for ketones.
  • Choose a reagent to reduce C=O to an alcohol, to CH₂, or to a pinacol, and write the haloform reaction.

Because the carbonyl carbon is δ⁺, the most typical reaction of aldehydes and ketones is nucleophilic addition: an electron-rich species adds to the C=O carbon. This lesson follows that idea and then looks at oxidation and reduction.

The mechanism of nucleophilic addition

Nucleophilic addition to a carbonyl group

  1. Nucleophile attacks Nu⁻ uses its lone pair to bond to the δ⁺ carbon
  2. π electrons move The C=O π pair shifts onto oxygen
  3. Alkoxide ion Carbon changes from sp² (planar) to sp³ (tetrahedral)
  4. Protonation Water or acid adds H⁺ to O⁻, giving the addition product

Aldehydes are generally more reactive than ketones. In a ketone two alkyl groups push electrons towards the carbonyl carbon (+I effect), lowering its δ⁺ charge, and they also crowd the carbon (steric effect), making it harder for the nucleophile to reach. Methanal, with no alkyl group, is the most reactive.

Reactivity towards nucleophiles: HCHO > RCHO > RCOR′ (fewer alkyl groups = more δ⁺ and less crowding).

Addition of HCN and of sodium bisulphite

CN⁻ adds to the carbonyl carbon and the alkoxide is protonated, giving a cyanohydrin: CH₃CHO + HCN → CH₃CH(OH)CN, 2-hydroxypropanenitrile. A new C–C bond forms, so the chain grows by one carbon. Acid hydrolysis turns the –CN into –COOH, giving a 2-hydroxy acid (from ethanal, 2-hydroxypropanoic acid, lactic acid); reduction turns –CN into –CH₂NH₂, giving an amino alcohol.

With sodium hydrogensulphite (NaHSO₃) aldehydes and many methyl ketones form crystalline, water-soluble bisulphite addition compounds, such as (CH₃)₂C(OH)SO₃Na from propanone. Treating them with mineral acid gives back the carbonyl compound, so the reaction is used to separate and purify aldehydes and ketones.

Worked example 1: mass of a cyanohydrin

5.8 g of propanone reacts completely with HCN. What mass of cyanohydrin forms? Working: propanone C₃H₆O = 58 g mol⁻¹, so 5.8 ÷ 58 = 0.100 mol. Product (CH₃)₂C(OH)CN = C₄H₇NO = 4×12 + 7×1 + 14 + 16 = 85 g mol⁻¹. Ratio 1 : 1, so mass = 0.100 × 85 = 8.5 g.

Addition of alcohols: acetals

With two equivalents of an alcohol and an acid catalyst (dry HCl), an aldehyde forms an acetal: CH₃CHO + 2CH₃OH → CH₃CH(OCH₃)₂ + H₂O, 1,1-dimethoxyethane. The steps: H⁺ protonates the carbonyl oxygen; one alcohol molecule adds, giving a hemiacetal (one –OH and one –OCH₃ on the same carbon); the –OH is protonated and leaves as water; a second alcohol molecule adds and loses H⁺. Ketones form the related ketals, and a diol such as ethane-1,2-diol gives a cyclic acetal.

Addition of ammonia derivatives (addition-elimination)

A nitrogen nucleophile H₂N–G adds to C=O; the addition product then loses water, so the final product has a C=N–G bond. The reaction is done in weakly acidic solution.

Carbonyl derivatives formed with ammonia derivatives
Reagent H₂N–GProduct typeProduct from propanone
Hydroxylamine, H₂N–OHOxime(CH₃)₂C=N–OH, acetoxime
Hydrazine, H₂N–NH₂Hydrazone(CH₃)₂C=N–NH₂
Phenylhydrazine, H₂N–NHC₆H₅Phenylhydrazone(CH₃)₂C=N–NHC₆H₅
Semicarbazide, H₂N–NHCONH₂Semicarbazone(CH₃)₂C=N–NHCONH₂
2,4-Dinitrophenylhydrazine (2,4-DNP)2,4-DinitrophenylhydrazoneColoured solid used to detect C=O

Reactions with ammonia itself

  • Aliphatic aldehydes (not methanal) add NH₃ and then lose water to give aldimines: CH₃CHO + NH₃ → CH₃CH(OH)NH₂ → CH₃CH=NH + H₂O.
  • Methanal gives hexamethylenetetramine (urotropine), a cage compound: 6HCHO + 4NH₃ → (CH₂)₆N₄ + 6H₂O. The textbook notes its use in medicine against urinary infections and that its controlled nitration gives the explosive RDX.
  • Propanone gives diacetone amine, (CH₃)₂C(NH₂)CH₂COCH₃, from two molecules of propanone and one of ammonia.
  • Benzaldehyde gives a condensation product, hydrobenzamide, from three molecules of benzaldehyde and two of ammonia.

Worked example 2: checking the urotropine equation

Working, atom by atom, for 6HCHO + 4NH₃ → (CH₂)₆N₄ + 6H₂O. Carbon: 6 on the left, 6 on the right. Hydrogen: 6×2 + 4×3 = 24 on the left; 6×2 + 6×2 = 24 on the right. Oxygen: 6 = 6. Nitrogen: 4 = 4. The equation is balanced.

Oxidation

Aldehydes are oxidised easily to carboxylic acids with the same number of carbon atoms (acidified K₂Cr₂O₇, KMnO₄ or CrO₃): CH₃CHO + [O] → CH₃COOH. This is why aldehydes are reducing agents (lesson 3 tests). Ketones resist oxidation; only strong agents such as concentrated HNO₃ or acidified KMnO₄ or K₂Cr₂O₇ break a C–C bond next to the C=O, giving a mixture of acids with fewer carbons. Propanone gives ethanoic acid and methanoic acid.

Popoff's rule: when an unsymmetrical ketone is oxidised, the C–CO bond breaks so that the C=O stays with the smaller alkyl group.

— Popoff's rule

Worked example 3: Popoff's rule

Oxidise hexan-2-one, CH₃–CO–CH₂CH₂CH₂CH₃. Working: the smaller group on the C=O is CH₃, so the C=O stays with it and becomes CH₃COOH, ethanoic acid. The bond between the C=O and the butyl group breaks, and the first carbon of the butyl group is oxidised to –COOH, giving CH₃CH₂CH₂COOH, butanoic acid. Check carbons: 2 + 4 = 6.

Reduction

  • To alcohols: LiAlH₄ or NaBH₄ (or H₂ with Ni, Pd or Pt) reduce aldehydes to primary alcohols and ketones to secondary alcohols: CH₃COCH₃ + 2[H] → CH₃CH(OH)CH₃. LiAlH₄ and NaBH₄ leave isolated C=C bonds and benzene rings untouched, so an α,β-unsaturated aldehyde keeps its C=C.
  • To hydrocarbons, Clemmensen reduction: heat with zinc amalgam and concentrated HCl: CH₃COCH₃ + 4[H] → CH₃CH₂CH₃ + H₂O.
  • To hydrocarbons, Wolff-Kishner reduction: the hydrazone is heated with a strong base (the textbook uses hydrazine with sodium ethoxide): CH₃CHO + 4[H] → CH₃CH₃ + H₂O, and N₂ is released from the hydrazine.
  • To pinacols: ketones with magnesium amalgam and water join two molecules: 2CH₃COCH₃ + 2[H] → (CH₃)₂C(OH)C(OH)(CH₃)₂, 2,3-dimethylbutane-2,3-diol (pinacol).

The haloform reaction

Ethanal and methyl ketones (compounds with CH₃CO–) react with a halogen and alkali. All three H atoms of the CH₃ are replaced by halogen, and the CX₃ group is then split off as the haloform, CHX₃. With iodine the product, iodoform (CHI₃), is a yellow solid with a characteristic smell, so this is the iodoform test for the CH₃CO– group (ethanol and propan-2-ol also pass, because the reagent first oxidises them to ethanal and propanone).

CH₃COCH₃ + 3I₂ + 4NaOH → CHI₃ + CH₃COONa + 3NaI + 3H₂O

— Iodoform reaction of propanone

Atom check: C 3 = 1 + 2; H 6 + 4 = 10 and 1 + 3 + 6 = 10; O 1 + 4 = 5 and 2 + 3 = 5; Na 4 = 1 + 3; I 6 = 3 + 3. Key takeaways: nucleophilic addition turns a planar sp² carbon into a tetrahedral sp³ one; H₂N–G reagents add and then eliminate water; aldehydes oxidise easily, ketones only by C–C cleavage (Popoff's rule); Clemmensen (acid) and Wolff-Kishner (base) reduce C=O to CH₂; the iodoform test detects CH₃CO–.

Check your understanding

  1. 1. During nucleophilic addition to propanone, how does the hybridisation of the carbonyl carbon change?

    1. sp to sp²
    2. sp³ to sp²
    3. sp² to sp³
    4. It stays sp²
    Show answer

    Answer: C. The carbonyl carbon starts trigonal planar (sp²). After the nucleophile bonds to it, it has four σ bonds in the tetrahedral alkoxide ion, so it becomes sp³.

  2. 2. Which compound reacts fastest with HCN?

    1. Methanal
    2. Ethanal
    3. Propanone
    4. Benzophenone
    Show answer

    Answer: A. Methanal has no alkyl or aryl group, so its carbonyl carbon is the most δ⁺ and the least crowded. Each extra group lowers the charge (+I) and adds steric hindrance, so ketones such as propanone and benzophenone are slowest.

  3. 3. Ethanal reacts with hydroxylamine in weakly acidic solution. What is the product?

    1. CH₃CH₂NHOH
    2. CH₃CH=NOH
    3. CH₃CH(OH)NH₂
    4. CH₃CONH₂
    Show answer

    Answer: B. H₂N–OH adds to C=O and the adduct loses H₂O, leaving a C=N bond: CH₃CH=N–OH, acetaldoxime. The other formulas are not oximes.

  4. 4. Using Popoff's rule, which acids form when pentan-2-one, CH₃COCH₂CH₂CH₃, is oxidised with concentrated HNO₃?

    1. Methanoic acid and butanoic acid
    2. Two molecules of propanoic acid
    3. Pentanoic acid only
    4. Ethanoic acid and propanoic acid
    Show answer

    Answer: D. The C=O stays with the smaller group (CH₃), giving CH₃COOH (ethanoic acid). The propyl group's first carbon becomes –COOH, giving CH₃CH₂COOH (propanoic acid). Carbons: 2 + 3 = 5.

  5. 5. Which compound will NOT give a yellow precipitate of iodoform with I₂ and NaOH?

    1. Propanone
    2. Ethanal
    3. Pentan-3-one
    4. Butanone
    Show answer

    Answer: C. The test needs a CH₃CO– group (or an alcohol oxidised to one). Pentan-3-one, CH₃CH₂COCH₂CH₃, has ethyl groups on both sides of the C=O and no CH₃CO–, so it gives no iodoform. Propanone, ethanal and butanone all contain CH₃CO–.

Privacy · Terms · Refunds · Delivery