- Practice
- About 24 min
- 5 practice questions
Condensation polymers, rubbers and biodegradable polymers
Write the formation of nylon-6,6, nylon-6, terylene, Bakelite, melamine and urea-formaldehyde resins, explain copolymers, vulcanisation and synthetic rubbers, and describe biodegradable polymers such as PHBV and nylon-2-nylon-6.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why condensation monomers must be at least bifunctional.
- Write the monomers, conditions and uses of nylon-6,6, nylon-6, terylene, Bakelite and melamine and urea-formaldehyde resins.
- Explain natural rubber, vulcanisation and the synthetic rubbers neoprene, Buna-N and Buna-S.
- Describe biodegradable polymers and calculate repeat-unit masses.
In condensation (step-growth) polymerisation, functional groups on neighbouring monomers react and a small molecule such as H₂O or NH₃ is lost each time. To keep the chain growing, every monomer must react at both ends: it must be at least bifunctional. A monomer with three reactive positions can join chains together, giving a cross-linked network.
Polyamides: nylons
- Nylon-6,6: equimolar hexanedioic (adipic) acid, HOOC(CH₂)₄COOH, and hexane-1,6-diamine, H₂N(CH₂)₆NH₂, first form a 'nylon salt'; heating removes water and forms amide links: n HOOC(CH₂)₄COOH + n H₂N(CH₂)₆NH₂ → –[OC(CH₂)₄CO–NH(CH₂)₆NH]ₙ– + 2n H₂O. Each monomer has six carbons, hence '6,6'. Used in textiles and tyre cords.
- Nylon-6: caprolactam heated to about 533 K with a trace of water opens to 6-aminohexanoic (ε-aminocaproic) acid, which polymerises: –[NH(CH₂)₅CO]ₙ–. One monomer with six carbons, hence '6'. Used for tyre cords and fabrics.
Worked example 1: the repeat unit of nylon-6,6
Working: adipic acid C₆H₁₀O₄ = 72 + 10 + 64 = 146 g mol⁻¹; hexane-1,6-diamine C₆H₁₆N₂ = 72 + 16 + 28 = 116 g mol⁻¹. Joining one of each in the chain forms two amide bonds per repeat unit and releases two H₂O: 146 + 116 − 2 × 18 = 226 g mol⁻¹ (C₁₂H₂₂N₂O₂: 144 + 22 + 28 + 32 = 226, a check). A nylon-6,6 molecule of molar mass 22 600 g mol⁻¹ therefore contains about 22 600 ÷ 226 = 100 repeat units.
Polyesters and resins
- Terylene (Dacron): ethane-1,2-diol and benzene-1,4-dicarboxylic (terephthalic) acid, or dimethyl terephthalate, heated at about 500 K with zinc acetate and antimony trioxide catalysts; ester links form with loss of water (or methanol). Blended with cotton or wool, and used to reinforce safety helmets.
- Bakelite: phenol and methanal with an acid or base catalyst give o- and p-hydroxymethylphenols, which join with more phenol through –CH₂– bridges to form the linear polymer novolac (used in paints). Further heating with methanal cross-links the chains into Bakelite. Soft Bakelites are used as glues for laminated wood and in varnishes; hard Bakelites for combs and pens.
- Melamine-formaldehyde resin: melamine (a triazine ring with three –NH₂ groups) and methanal condense to a cross-linked resin used for unbreakable crockery.
- Urea-formaldehyde resin: urea and methanal give hydroxymethylureas, which condense with loss of water into a cross-linked network.
Condensation polymers in this unit
-
Polyamides
- Nylon-6,6 (adipic acid + hexane-1,6-diamine)
- Nylon-6 (caprolactam)
- Nylon-2-nylon-6 (glycine + 6-aminohexanoic acid)
-
Polyesters
- Terylene (ethane-1,2-diol + terephthalic acid)
- PHBV (two hydroxy acids)
-
Formaldehyde resins
- Bakelite (phenol)
- Melamine-formaldehyde
- Urea-formaldehyde
Copolymers and rubbers
A copolymer contains two or more different kinds of monomer unit, and its properties differ from those of the homopolymers. Natural rubber comes from the latex that oozes from cuts in the bark of the rubber tree (Hevea brasiliensis). It is cis-1,4-polyisoprene: thousands of isoprene (2-methylbuta-1,3-diene) units, –[CH₂–C(CH₃)=CH–CH₂]ₙ–, joined in a line. On its own it is not very strong and becomes sticky when warm and brittle when cold.
Vulcanisation was discovered by Charles Goodyear in 1839, when a mixture of rubber and sulphur fell on a hot stove. Heating rubber with sulphur at about 373-423 K (100-150 °C) forms sulphur cross-links (–S–S– bridges) between the chains at their reactive positions. According to the textbook, rubber with about 1-3% sulphur is soft and stretchy, and with 3-10% it is harder but still flexible. The cross-links stop the chains sliding past each other, so the rubber springs back after stretching.
| Synthetic rubber | Monomer(s) | Polymer | Uses |
|---|---|---|---|
| Neoprene | Chloroprene (2-chlorobuta-1,3-diene), free-radical polymerisation | –[CH₂–C(Cl)=CH–CH₂]ₙ– | Better than natural rubber and resistant to chemicals: chemical containers, conveyor belts |
| Buna-N | Buta-1,3-diene + acrylonitrile (copolymer) | –[CH₂–CH=CH–CH₂–CH₂–CH(CN)]ₙ– | Hoses and tank linings |
| Buna-S (SBR) | Buta-1,3-diene + styrene, about 3 : 1, with sodium | –[CH₂–CH=CH–CH₂–CH₂–CH(C₆H₅)]ₙ– | A general-purpose synthetic rubber |
Worked example 2: the repeat unit of Buna-N
Working: the repeat unit is one butadiene (C₄H₆ = 48 + 6 = 54) plus one acrylonitrile (C₃H₃N = 36 + 3 + 14 = 53) unit. Addition polymerisation loses nothing, so the repeat unit = 54 + 53 = 107 g mol⁻¹, and the percentage of nitrogen in it = 14 ÷ 107 × 100 = 13.1%. The polar –CN groups are what make Buna-N resist oils.
Biodegradable polymers
Natural polymers break down on their own in time, but most synthetic polymers do not, and they pollute the environment. Biodegradable polymers are broken down by microorganisms in soil. Examples: polyhydroxybutyrate (PHB), PHBV (poly-3-hydroxybutyrate-co-3-hydroxyvalerate), polyglycolic acid (PGA), polylactic acid (PLA) and poly-ε-caprolactone (PCL). In medicine they are used for surgical stitches that dissolve; they are broken down by enzymes and absorbed or excreted.
- PHBV: a copolymer of 3-hydroxybutanoic acid and 3-hydroxypentanoic acid joined by ester links (water is lost). Used in orthopaedic devices and in capsules that release a drug slowly.
- Nylon-2-nylon-6: a polyamide copolymer of glycine (H₂NCH₂COOH, two carbons) and 6-aminohexanoic acid (six carbons): n H₂NCH₂COOH + n H₂N(CH₂)₅COOH → –[NHCH₂CO–NH(CH₂)₅CO]ₙ– + (2n − 1) H₂O. The textbook counts the water as 2n − 1 for a chain with free ends.
Condensation polymer: bifunctional monomers, a small molecule lost at every link (nylons, terylene, Bakelite). Copolymer: two or more kinds of monomer (Buna-N, Buna-S, PHBV, nylon-2-nylon-6).
Key takeaways: nylon-6,6 and nylon-6 are polyamides; terylene is a polyester; Bakelite, melamine and urea resins are cross-linked formaldehyde polymers. Natural rubber is cis-polyisoprene, toughened by sulphur cross-links in vulcanisation; neoprene, Buna-N and Buna-S are synthetic rubbers. PHBV and nylon-2-nylon-6 are biodegradable.
Check your understanding
-
1. What are the monomers of nylon-6,6?
- Hexanedioic acid and hexane-1,6-diamine
- Caprolactam only
- Ethane-1,2-diol and terephthalic acid
- Phenol and methanal
Show answer
Answer: A. Nylon-6,6 is made from adipic (hexanedioic) acid and hexamethylenediamine (hexane-1,6-diamine), each with six carbons. Caprolactam gives nylon-6, the diol and diacid give terylene, and phenol with methanal gives Bakelite.
-
2. Why does vulcanisation make rubber stronger and more elastic?
- It removes the double bonds completely
- It converts rubber into a thermoplastic
- Sulphur forms cross-links between the polymer chains
- It adds chlorine to the chains
Show answer
Answer: C. Heating with sulphur forms –S–S– bridges between the polyisoprene chains. The cross-links stop the chains slipping past each other, so the rubber is tougher and returns to shape after stretching.
-
3. Which is the monomer of neoprene?
- Isoprene
- Buta-1,3-diene
- Acrylonitrile
- Chloroprene (2-chlorobuta-1,3-diene)
Show answer
Answer: D. Neoprene is made by free-radical polymerisation of chloroprene. Isoprene is the unit of natural rubber; butadiene and acrylonitrile together give Buna-N.
-
4. Which polymer is biodegradable?
- PHBV
- Polythene
- Teflon
- PVC
Show answer
Answer: A. PHBV, a polyester of 3-hydroxybutanoic and 3-hydroxypentanoic acids, is broken down by microorganisms. Polythene, Teflon and PVC resist biological breakdown.
-
5. What is the mass of the repeat unit of nylon-6, –[NH(CH₂)₅CO]–? (C = 12, H = 1, N = 14, O = 16)
- 131 g mol⁻¹
- 113 g mol⁻¹
- 226 g mol⁻¹
- 149 g mol⁻¹
Show answer
Answer: B. The repeat unit is C₆H₁₁NO: 6 × 12 + 11 + 14 + 16 = 72 + 11 + 14 + 16 = 113 g mol⁻¹. It equals 6-aminohexanoic acid (131) minus one water (18).
Sign in to keep track of the lessons you finish.