• Practice
  • About 23 min
  • 5 practice questions

Food additives and cleansing agents

Name the categories of food additives and explain how preservatives, antioxidants and sweeteners work, then explain soap making, total fatty matter, the cleansing action of soap through micelles, and why detergents work in hard water.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the main categories of food additives and their advantages.
  • Explain how preservatives and antioxidants (BHT, BHA) protect food, and tell sugar substitutes from artificial sweeteners.
  • Write the saponification of a fat and calculate masses of soap and glycerol.
  • Explain total fatty matter, the cleansing action of soap and the three types of detergent.

The ingredients list on a packet of biscuits or chocolate names emulsifiers and dough conditioners beside flour, oil, sugar and milk solids. These food additives are substances that are not naturally part of the food but are added to improve its nutritive value, appearance, taste, texture or shelf life.

Food additives

  • Categories: aroma compounds, food colours, preservatives, stabilisers, artificial sweeteners, antioxidants, buffering substances, vitamins and minerals.
  • Advantages: preservatives reduce spoilage and extend shelf life; added vitamins and minerals reduce malnutrition; flavouring agents improve aroma; antioxidants prevent possibly harmful oxidation products of fats and other food components.

Preservatives inhibit or slow fermentation, souring and other decay caused by microorganisms. Benzoic acid, sorbic acid and their salts inhibit many fungi, yeasts and bacteria; alkyl esters of hydroxybenzoic acid work well in less acidic foods; acetic acid preserves pickles and vegetables; sodium metabisulphite preserves fresh fruits and vegetables. Physical methods also preserve food: heat (pasteurisation, sterilisation), cold (chilling, freezing), drying and irradiation.

Antioxidants slow the oxidation of fats and oils, which makes them rancid. That oxidation is a free-radical chain reaction. BHT (butylated hydroxytoluene) and BHA (butylated hydroxyanisole) react readily with these free radicals and so stop the chain. Sulphur dioxide and sulphites act as antimicrobial agents, antioxidants and enzyme inhibitors.

Sugar substitutes and artificial sweeteners

  • Sugar substitutes
    • Used like sugar for sweetness
    • Metabolised without the need for insulin
    • Sorbitol, xylitol, mannitol (sugar alcohols)
  • Artificial sweeteners
    • Synthetic compounds that taste sweet
    • No or negligible food value
    • Saccharin, aspartame, sucralose, alitame

Soaps

Soap is the sodium or potassium salt of a higher fatty acid. Fats and oils are glyceryl esters (triglycerides) of long-chain fatty acids. Heated with NaOH solution they are hydrolysed to soap and glycerol: this is saponification. Common salt is then added to lower the solubility of the soap so that it separates out (salting out), and colours, perfumes and other substances are mixed in.

(C₁₇H₃₅COO)₃C₃H₅ + 3NaOH → 3C₁₇H₃₅COONa + C₃H₅(OH)₃ (glyceryl tristearate + sodium hydroxide → sodium stearate + glycerol)

— Saponification

Worked example 1: soap from a fat

Atom check first: tristearin is C₅₇H₁₁₀O₆. Left: C 57; H 110 + 3 = 113; O 6 + 3 = 9; Na 3. Right: 3 × C₁₈H₃₅O₂Na gives C 54, H 105, O 6, Na 3; glycerol C₃H₈O₃ adds C 3, H 8, O 3. Totals: C 57, H 113, O 9, Na 3: balanced. Now, 89.0 g of tristearin is saponified completely. Tristearin = 57 × 12 + 110 + 6 × 16 = 684 + 110 + 96 = 890 g mol⁻¹, so 0.100 mol. Soap: 0.300 mol × 306 g mol⁻¹ (C₁₈H₃₅O₂Na = 216 + 35 + 32 + 23) = 91.8 g. Glycerol: 0.100 mol × 92 g mol⁻¹ = 9.2 g.

Total fatty matter (TFM)

The quality of a soap is expressed as its total fatty matter: the total amount of fatty matter that can be separated from a sample after splitting it with a mineral acid. The higher the TFM, the better the soap. According to the textbook (2024 reprint), BIS standards require at least 76% TFM for Grade 1 soap, 70% for Grade 2 and 60% for Grade 3. Other quality measures are lather, moisture content, mushiness and matter insoluble in alcohol.

Worked example 2: grading a soap

A made-up 5.00 g sample of soap is split with acid and yields 3.65 g of fatty matter. What is its TFM, and which grade does it meet on the textbook's figures? Working: TFM = 3.65 ÷ 5.00 × 100 = 73%. This is above 70% (Grade 2) but below 76% (Grade 1), so it meets Grade 2.

How soap cleans

Take sodium palmitate, C₁₅H₃₁COO⁻Na⁺. The palmitate ion has two ends: a long non-polar hydrocarbon tail, which is hydrophobic and dissolves in grease and oil, and a polar carboxylate head, –COO⁻, which is hydrophilic and dissolves in water. Dirt on cloth is usually dust held in a film of grease.

Cleansing action of soap

  1. Tails enter grease The hydrocarbon tails dissolve in the grease film on the cloth
  2. Heads face the water The –COO⁻ heads stay on the surface, in the water
  3. Micelles form Grease breaks into small droplets coated with negative heads
  4. Droplets repel Like charges stop the droplets from joining, so they stay suspended (an emulsion)
  5. Rinsing Water carries away the droplets and the dirt with them

Detergents

Synthetic detergents contain sodium salts of alkyl hydrogensulphates or of long-chain alkylbenzenesulphonic acids. They clean the same way as soap. Unlike soap, they can be used in hard water and in acidic conditions: soap forms an insoluble scum with Ca²⁺ and Mg²⁺ (2C₁₇H₃₅COO⁻ + Ca²⁺ → (C₁₇H₃₅COO)₂Ca↓) and is turned into insoluble fatty acid by acid, whereas the calcium salts of detergents are soluble and sulphonic acids are strong acids.

Types of detergent
TypeCharged partExample from the textbook
AnionicLarge negative ion (sulphate or sulphonate head)Sodium lauryl sulphate, CH₃(CH₂)₁₁OSO₃⁻Na⁺
CationicLarge positive ion (quaternary ammonium head)n-Hexadecyltrimethylammonium chloride, CH₃(CH₂)₁₅N⁺(CH₃)₃Cl⁻
Non-ionicNo ions; many –OH groups make the head polarPentaerythrityl stearate, an ester with three free –CH₂OH groups

Key takeaways: additives preserve, colour, flavour, sweeten and fortify food; BHT and BHA stop the free-radical oxidation of fats. Saponification of a fat with NaOH gives soap and glycerol; higher TFM means better soap. Soap cleans by forming micelles round grease; detergents also work in hard and acidic water.

Check your understanding

  1. 1. How do BHT and BHA protect fats and oils from turning rancid?

    1. They kill the microorganisms in the food
    2. They react with free radicals and stop the chain reaction of oxidation
    3. They add sweetness that hides the rancid taste
    4. They hydrolyse the fats into fatty acids
    Show answer

    Answer: B. The oxidation of fats is a free-radical chain reaction. BHT and BHA react readily with the radicals, ending the chain. Killing microbes is the job of preservatives.

  2. 2. Which is an artificial sweetener rather than a sugar substitute?

    1. Sorbitol
    2. Xylitol
    3. Mannitol
    4. Sucralose
    Show answer

    Answer: D. Sorbitol, xylitol and mannitol are sugar alcohols used as sugar substitutes. Sucralose, like saccharin and aspartame, is a synthetic sweetener with negligible food value.

  3. 3. In a soap micelle in water, where are the hydrocarbon tails of the soap ions?

    1. Pointing outwards into the water
    2. Dissolved in the grease at the centre
    3. Attached to the sodium ions
    4. Dissolved in the water between micelles
    Show answer

    Answer: B. The hydrophobic tails dissolve in the grease at the centre, and the hydrophilic –COO⁻ heads face outwards into the water, giving each droplet a negative surface.

  4. 4. A made-up soap sample of 8.0 g yields 6.4 g of fatty matter. What is its TFM?

    1. 64%
    2. 76%
    3. 80%
    4. 88%
    Show answer

    Answer: C. TFM = 6.4 ÷ 8.0 × 100 = 80%. On the textbook's figures this is above the 76% minimum for Grade 1.

  5. 5. Why do detergents work in hard water while soaps form scum?

    1. Detergents have no hydrocarbon tail
    2. Detergents react with calcium to form a precipitate
    3. The calcium and magnesium salts of detergents are soluble, but those of soaps are not
    4. Hard water has no calcium ions
    Show answer

    Answer: C. Soap anions form insoluble calcium and magnesium salts (scum). Detergent anions, being sulphates or sulphonates, form soluble salts, so they stay in solution and keep cleaning.

Privacy · Terms · Refunds · Delivery