- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Chemistry in everyday life
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions first, writing down your answer and your working for each, and only then open the explanations. The questions mix all five lessons and are a little harder than the lesson checks.
Final self-assessment
-
1. Which statement about the therapeutic index is correct?
- It is the smallest amount of a drug that is effective
- A drug with a larger therapeutic index has a wider margin between its effective and toxic levels
- It measures how fast a drug acts
- A smaller index always means a safer drug
Show answer
Answer: B. The therapeutic index is the ratio of the highest tolerated level to the lowest effective level. The larger the ratio, the wider the safety margin.
-
2. Sulphanilamide stops bacterial growth but does not harm human folic acid supply in the same way. Why?
- Humans make folic acid from PABA faster than bacteria
- Sulphanilamide cannot enter human cells
- Humans obtain folic acid from food and do not use this bacterial pathway
- Sulphanilamide is an agonist in humans
Show answer
Answer: C. Bacteria must make folic acid from PABA with dihydropteroate synthase, which sulphanilamide inhibits. Humans take folic acid in their diet, so blocking that enzyme does not starve human cells of it.
-
3. Morphine relieves pain by activating opioid receptors. Morphine is therefore
- an antagonist
- a competitive inhibitor
- an allosteric inhibitor
- an agonist
Show answer
Answer: D. A drug that binds to a receptor and switches it on, mimicking a natural messenger, is an agonist. An antagonist such as caffeine at adenosine receptors binds without activating.
-
4. Omeprazole reduces stomach acid by
- blocking the enzyme (proton pump) that releases acid
- neutralising HCl directly
- blocking H₁ histamine receptors
- killing bacteria in the stomach
Show answer
Answer: A. Omeprazole and rabeprazole inhibit the proton pump enzyme that secretes acid. Bases like Mg(OH)₂ neutralise acid directly, and H₁ blockers are antihistamines for allergy.
-
5. Which pair is correctly matched with its target in bacteria?
- Penicillin: DNA gyrase
- Ciprofloxacin: cell wall synthesis
- Tetracycline: 30S ribosomal subunit
- Erythromycin: folic acid synthesis
Show answer
Answer: C. Tetracyclines bind to the 30S subunit of the bacterial ribosome. Penicillins block cell wall synthesis, ciprofloxacin inhibits DNA gyrase, and erythromycin acts on ribosomes.
-
6. How many moles of CO₂ are released when 0.84 g of NaHCO₃ reacts completely with excess HCl? (NaHCO₃ = 84 g mol⁻¹)
- 0.020 mol
- 0.010 mol
- 0.0050 mol
- 0.10 mol
Show answer
Answer: B. NaHCO₃ + HCl → NaCl + H₂O + CO₂: one mole of CO₂ per mole of NaHCO₃. Moles = 0.84 ÷ 84 = 0.010 mol, so 0.010 mol CO₂ (0.224 L at STP).
-
7. Which compound is used to preserve pickles?
- BHT
- Saccharin
- Sorbitol
- Acetic acid
Show answer
Answer: D. Acetic acid (vinegar) lowers the pH and prevents microbial growth, so it is the main preservative in pickles. BHT is an antioxidant, saccharin a sweetener and sorbitol a sugar substitute.
-
8. A fat is a triester of glycerol. How many moles of NaOH are needed to saponify 0.25 mol of it completely?
- 0.25 mol
- 0.50 mol
- 0.75 mol
- 1.0 mol
Show answer
Answer: C. Each fat molecule has three ester groups, each needing one NaOH: 3 × 0.25 = 0.75 mol NaOH, giving 0.75 mol soap and 0.25 mol glycerol.
-
9. Which statement about soap micelles is correct?
- Micelles join into large drops because their surfaces are neutral
- The polar heads point into the grease
- The negatively charged surfaces of micelles repel one another, so the grease stays suspended
- Soap dissolves grease by reacting with it chemically
Show answer
Answer: C. Each micelle carries –COO⁻ heads on its surface, so micelles repel each other and do not merge; the grease stays dispersed and is rinsed away. The hydrocarbon tails, not the heads, are in the grease.
-
10. LDPE is branched while HDPE is linear. Which property follows from this?
- HDPE chains pack more closely, so HDPE is denser and melts higher
- LDPE is a condensation polymer
- HDPE is thermosetting
- LDPE contains fluorine
Show answer
Answer: A. Linear chains can line up and pack tightly, raising density, strength and melting point. Branches keep LDPE chains apart. Both are addition thermoplastics made from ethene.
-
11. Which pair of monomers gives an addition copolymer?
- Adipic acid and hexane-1,6-diamine
- Phenol and methanal
- Ethane-1,2-diol and terephthalic acid
- Buta-1,3-diene and styrene
Show answer
Answer: D. Butadiene and styrene add together without losing any molecule, forming the copolymer Buna-S. The other pairs react by condensation, losing water.
-
12. A polystyrene sample has a degree of polymerisation of 2000. What is its approximate molar mass? (Styrene C₈H₈ = 104 g mol⁻¹)
- 104 000 g mol⁻¹
- 52 000 g mol⁻¹
- 208 000 g mol⁻¹
- 2104 g mol⁻¹
Show answer
Answer: C. In an addition polymer the repeat unit has the same mass as the monomer, 104 g mol⁻¹. Molar mass ≈ 2000 × 104 = 208 000 g mol⁻¹.
-
13. Novolac on further heating with methanal gives Bakelite. What change takes place?
- The chains are broken into monomers
- –CH₂– bridges cross-link the linear chains into a network
- Sulphur bridges form between chains
- Water is added to the chains
Show answer
Answer: B. Novolac is a linear phenol-formaldehyde polymer. More methanal adds –CH₂– bridges at further ring positions, linking the chains into a rigid three-dimensional network, which is why Bakelite is thermosetting.
-
14. Which polymer is formed from a single monomer that has both an –NH₂ and a –COOH group (after ring opening)?
- Nylon-6
- Nylon-6,6
- Terylene
- Buna-N
Show answer
Answer: A. Caprolactam opens to 6-aminohexanoic acid, which carries both groups, so it polymerises by itself to nylon-6. Nylon-6,6 and terylene each need two different bifunctional monomers, and Buna-N is an addition copolymer.
-
15. Why are polymers such as PGA and PHBV used for surgical stitches?
- They are thermosetting and never change
- They conduct electricity
- They contain sulphur cross-links
- They are broken down by enzymes in the body and absorbed or excreted
Show answer
Answer: D. These biodegradable polyesters are hydrolysed by enzymes, so the stitches disappear as the wound heals and the products are absorbed or excreted.
Questions 1-3: lesson 1 (drugs and drug-target interactions). Questions 4-6: lesson 2 (therapeutic classes of drugs). Questions 7-9: lesson 3 (food additives and cleansing agents). Questions 10-12: lesson 4 (classification and addition polymerisation). Questions 13-15: lesson 5 (condensation polymers, rubbers, biodegradable polymers).
Sign in to keep track of the lessons you finish.