• Practice
  • About 22 min
  • 5 practice questions

Polymers: classification and addition polymerisation

Classify polymers by source, structure, molecular forces and mode of synthesis, explain the free-radical mechanism of addition polymerisation, and prepare polythene (LDPE, HDPE), Teflon and Orlon.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define polymer, monomer and polymerisation.
  • Classify polymers in four ways with examples.
  • Write the initiation, propagation and termination steps of free-radical polymerisation.
  • Describe the preparation and uses of LDPE, HDPE, Teflon and Orlon, and calculate a degree of polymerisation.

The word polymer comes from the Greek polumeres, 'having many parts'. A polymer is a very large molecule built from many small repeating units called monomers; for example, poly(vinyl chloride), PVC, is made from vinyl chloride, CH₂=CHCl. Making a polymer from monomers is polymerisation.

Classification of polymers

Four ways to classify polymers
BasisTypes and examples
SourceNatural (cellulose, silk); synthetic (polythene, PVC); semi-synthetic, natural polymers modified chemically (viscose rayon, cellulose diacetate)
StructureLinear, one long chain (HDPE, PVC); branched, a main chain with side branches (LDPE, polypropylene); cross-linked, chains joined to each other (Bakelite, melamine-formaldehyde)
Molecular forcesElastomers, soft and stretchy (neoprene, Buna-S, Buna-N); fibres, chains held by hydrogen bonds, high tensile strength (nylon-6,6, terylene); thermoplastics, soften on heating and harden on cooling, can be remoulded (polythene, PVC, polystyrene); thermosetting, set into an infusible mass on heating (Bakelite, melamine-formaldehyde)
Mode of synthesisAddition polymers, from monomers adding without losing any by-product (polythene, PVC, Teflon); condensation polymers, formed with loss of small molecules such as H₂O or NH₃ (nylon-6,6, polyesters)

Thermoplastics and thermosetting polymers

  • Thermoplastics
    • Linear or slightly branched chains
    • Soften on heating, harden on cooling
    • Can be remoulded many times
    • Polythene, PVC, polystyrene
  • Thermosetting polymers
    • Heavily cross-linked network
    • Set hard on heating and do not soften again
    • Cannot be remoulded
    • Bakelite, melamine-formaldehyde

Two kinds of polymerisation

Addition (chain-growth) polymerisation: the reactive end of a growing chain adds across the C=C of one monomer after another. Depending on the reactive end, the mechanism is free radical, cationic or anionic. Condensation (step-growth) polymerisation: monomers with two or more functional groups react with each other, releasing a small molecule each time (lesson 5).

The free-radical mechanism

Free-radical polymerisation of styrene

  1. Initiation Benzoyl peroxide splits on heating into radicals, which lose CO₂ to give phenyl radicals, C₆H₅•
  2. Propagation 1 C₆H₅• adds to CH₂=CHC₆H₅, giving a new, stabilised radical C₆H₅–CH₂–ĊH–C₆H₅
  3. Propagation 2 That radical adds another monomer, again and again, growing by thousands of units
  4. Termination Two growing radicals join (or meet an impurity such as O₂), or the monomer runs out

Each propagation step forms a new C–C single bond from the C=C of the monomer and leaves the unpaired electron at the new chain end, so one initiator radical can start a chain of thousands of monomer units. The radical on the carbon carrying the phenyl group is stabilised by the ring, which is why styrene adds head to tail.

n CH₂=CHX → –(CH₂–CHX)ₙ– (X = H for polythene, Cl for PVC, C₆H₅ for polystyrene, CN for Orlon); the repeat unit has the same atoms as the monomer.

Important addition polymers

Preparation of some addition polymers
PolymerMonomerConditionsUses
LDPE (low-density polythene)Ethene, CH₂=CH₂473-573 K (200-300 °C), about 1000 atm, traces of O₂ (peroxides start free radicals); branched chainsCable insulation, toys
HDPE (high-density polythene)Ethene373 K, 6-7 atm, Ziegler-Natta catalyst TiCl₄ + Al(C₂H₅)₃; linear chains, higher density and melting pointBottles, pipes
Teflon (PTFE)Tetrafluoroethene, CF₂=CF₂Heated with O₂ or ammonium persulphate under high pressureCoatings, non-stick utensils
Orlon (polyacrylonitrile, PAN)Acrylonitrile (vinyl cyanide), CH₂=CHCNPeroxide initiatorWool substitute for blankets and sweaters

Worked example 1: degree of polymerisation

A sample of polythene has an average molar mass of 28 000 g mol⁻¹. How many ethene units does an average chain contain? Working: the repeat unit –CH₂–CH₂– has the same formula as ethene, C₂H₄ = 2 × 12 + 4 = 28 g mol⁻¹. Degree of polymerisation n = 28 000 ÷ 28 = 1000. (The end groups from the initiator are negligible in so large a molecule.)

Worked example 2: percentage of fluorine in Teflon

Working: the repeat unit –CF₂–CF₂– is C₂F₄ = 2 × 12 + 4 × 19 = 24 + 76 = 100 g mol⁻¹. Percentage of F = 76 ÷ 100 × 100 = 76%. The strong C–F bonds and the fluorine sheath round the chain make Teflon very unreactive and non-sticky.

Key takeaways: polymers are classified by source, structure, forces and mode of synthesis; thermoplastics can be remoulded, thermosets cannot. Addition polymerisation runs by initiation, propagation and termination. LDPE (high pressure, O₂, branched) and HDPE (Ziegler-Natta, linear) both come from ethene; Teflon from CF₂=CF₂ and Orlon from acrylonitrile.

Check your understanding

  1. 1. Viscose rayon is made by chemically treating cellulose. It is classified as

    1. a natural polymer
    2. a semi-synthetic polymer
    3. a synthetic addition polymer
    4. a thermosetting polymer
    Show answer

    Answer: B. A natural polymer modified by chemical treatment is semi-synthetic. Viscose rayon and cellulose diacetate are the textbook's examples.

  2. 2. Which polymer is thermosetting?

    1. PVC
    2. Polystyrene
    3. Polythene
    4. Bakelite
    Show answer

    Answer: D. Bakelite has a heavily cross-linked network, so once set by heat it cannot soften again. PVC, polystyrene and polythene are thermoplastics that can be remoulded.

  3. 3. In the free-radical polymerisation of styrene with benzoyl peroxide, what happens in the initiation step?

    1. Two polymer chains join together
    2. Styrene loses a hydrogen atom
    3. Benzoyl peroxide breaks into radicals that give phenyl radicals and CO₂
    4. Water is eliminated between monomers
    Show answer

    Answer: C. Initiation creates the first radicals: the weak O–O bond of benzoyl peroxide breaks, and the radicals lose CO₂ to give C₆H₅•, which then adds to a styrene molecule.

  4. 4. How does HDPE differ from LDPE?

    1. HDPE is made with a Ziegler-Natta catalyst at low pressure and has linear chains
    2. HDPE is made at 1000 atm with oxygen and has branched chains
    3. HDPE is a condensation polymer
    4. HDPE contains chlorine
    Show answer

    Answer: A. HDPE is made at about 373 K and 6-7 atm with TiCl₄ + Al(C₂H₅)₃, giving linear chains that pack closely, so it is denser and melts higher. LDPE is made at high pressure with O₂ and is branched.

  5. 5. A PVC sample has an average molar mass of 62 500 g mol⁻¹. What is its degree of polymerisation? (C = 12, H = 1, Cl = 35.5)

    1. 500
    2. 2000
    3. 1000
    4. 1250
    Show answer

    Answer: C. The repeat unit –CH₂–CHCl– has the formula of vinyl chloride, C₂H₃Cl = 24 + 3 + 35.5 = 62.5 g mol⁻¹. n = 62 500 ÷ 62.5 = 1000.

Privacy · Terms · Refunds · Delivery