• Practice
  • About 30 min
  • 15 practice questions

Final self-assessment: p-Block Elements II

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, note your answers, then check them against the explanations. The questions mix all five lessons and are harder on average than the lesson checks.

Final self-assessment

  1. 1. Which statement about nitrogen is true?

    1. It is the least electronegative element of its group.
    2. It has a lower ionisation enthalpy than oxygen.
    3. It has d orbitals available for bonding.
    4. It can form pπ–pπ multiple bonds with itself.
    Show answer

    Answer: D. Nitrogen is small and forms strong pπ–pπ bonds (N≡N). It is the most electronegative member of group 15, has no d orbitals, and its ionisation enthalpy is actually higher than oxygen's (half-filled 2p³).

  2. 2. An element of group 15 in period 3 has the configuration

    1. 1s² 2s² 2p⁴
    2. 1s² 2s² 2p³
    3. 1s² 2s² 2p⁶ 3s² 3p³
    4. 1s² 2s² 2p⁶ 3s² 3p²
    Show answer

    Answer: C. Period 3 means n = 3 for the valence shell; group 15 means ns² np³. That is phosphorus, 1s² 2s² 2p⁶ 3s² 3p³.

  3. 3. In which of the following is ammonia NOT used?

    1. Making [Cu(NH₃)₄]²⁺, the deep blue test for Cu²⁺
    2. Group III analysis (with NH₄Cl)
    3. Tollens' reagent
    4. Group II analysis (H₂S in dilute HCl)
    Show answer

    Answer: D. Group II cations are precipitated by H₂S in dilute HCl, without ammonia. Group III uses NH₄OH/NH₄Cl, Tollens' reagent is [Ag(NH₃)₂]⁺, and the blue copper test uses excess ammonia.

  4. 4. How many moles of NO are formed when 6 mol of copper react with dilute nitric acid?

    1. 2 mol
    2. 6 mol
    3. 4 mol
    4. 8 mol
    Show answer

    Answer: C. 3Cu + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂O: 2 mol NO per 3 mol Cu, so 6 mol Cu gives 6 × 2/3 = 4 mol NO.

  5. 5. Zinc reacts with very dilute nitric acid to give ammonium nitrate. The oxidation state of nitrogen changes from

    1. +5 to −3
    2. +5 to +1
    3. +5 to +2
    4. +3 to −3
    Show answer

    Answer: A. 4Zn + 10HNO₃ → 4Zn(NO₃)₂ + NH₄NO₃ + 3H₂O. In NH₄⁺, x + 4 = +1, so N is −3; it started at +5 in HNO₃.

  6. 6. P₄O₆ reacts with cold water to give

    1. H₃PO₄
    2. H₃PO₃
    3. H₄P₂O₇
    4. HPO₃
    Show answer

    Answer: B. P₄O₆ + 6H₂O → 4H₃PO₃. Phosphorus stays at +3, so the product is phosphorous acid. P₄O₁₀ would give H₃PO₄.

  7. 7. The normality of a 2 M orthophosphoric acid solution is

    1. 6 N
    2. 2 N
    3. 4 N
    4. 3 N
    Show answer

    Answer: A. H₃PO₄ has three P–OH groups, so basicity 3; normality = 2 × 3 = 6 N.

  8. 8. What is the basicity of hypophosphorous acid, H₃PO₂, and why?

    1. 3, because it has three H atoms
    2. 2, because it has two O atoms
    3. 1, because only one H is attached to oxygen
    4. 0, because it is a reducing agent
    Show answer

    Answer: C. H₃PO₂ is H₂P(O)OH: two H atoms are bonded directly to P and are not acidic; only the one P–OH hydrogen ionises, so the basicity is 1.

  9. 9. Which reaction shows SO₂ acting as an oxidising agent?

    1. SO₂ + 2H₂O + Cl₂ → H₂SO₄ + 2HCl
    2. 2SO₂ + O₂ → 2SO₃
    3. 2H₂S + SO₂ → 3S + 2H₂O
    4. SO₂ + NaOH → NaHSO₃
    Show answer

    Answer: C. In 2H₂S + SO₂ → 3S + 2H₂O, sulphur in SO₂ goes from +4 to 0 (reduced), so SO₂ oxidises H₂S. In the first two SO₂ is oxidised to +6; the last is just acid–base.

  10. 10. How many moles of SO₂ are released when 0.4 mol of carbon is oxidised by hot concentrated H₂SO₄?

    1. 0.4 mol
    2. 0.8 mol
    3. 1.2 mol
    4. 0.2 mol
    Show answer

    Answer: B. C + 2H₂SO₄ → CO₂ + 2SO₂ + 2H₂O: 2 mol SO₂ per mol C, so 0.4 mol C gives 0.8 mol SO₂. Electron check: C loses 4 e⁻, each S gains 2 e⁻.

  11. 11. Which is the strongest oxidising agent?

    1. Cl₂
    2. Br₂
    3. I₂
    4. F₂
    Show answer

    Answer: D. Fluorine is the most electronegative element and has the highest standard reduction potential of the halogens, so it is the strongest oxidising agent.

  12. 12. The correct order of acidity of the oxoacids of chlorine is

    1. HClO < HClO₂ < HClO₃ < HClO₄
    2. HClO₄ < HClO₃ < HClO₂ < HClO
    3. HClO₃ < HClO₄ < HClO₂ < HClO
    4. HClO₂ < HClO < HClO₃ < HClO₄
    Show answer

    Answer: A. More oxygen atoms on chlorine pull electron density from the O–H bond and spread the negative charge of the anion, so acidity rises from HClO (+1) to HClO₄ (+7).

  13. 13. Which halogen acid reduces concentrated H₂SO₄ to H₂S?

    1. HF
    2. HCl
    3. HBr
    4. HI
    Show answer

    Answer: D. HI is the strongest reducing agent of the halogen acids: 8HI + H₂SO₄ → 4I₂ + H₂S + 4H₂O. HBr reduces H₂SO₄ only to SO₂; HCl and HF do not reduce it.

  14. 14. XeF₆ on complete hydrolysis gives

    1. XeOF₄
    2. XeO₂F₂
    3. XeO₃
    4. XeO₂
    Show answer

    Answer: C. XeF₆ + 3H₂O → XeO₃ + 6HF. Partial hydrolysis gives XeOF₄ and XeO₂F₂ on the way, but complete hydrolysis replaces all six F.

  15. 15. Which is the most easily liquefied of these gases?

    1. He
    2. Ne
    3. Ar
    4. Kr
    Show answer

    Answer: D. Ease of liquefaction rises with the strength of London (dispersion) forces, which grow with atomic size. Of the four, krypton is the largest and has the highest boiling point.

Questions 1-3: lesson 1 (nitrogen and ammonia). Questions 4-5: lesson 2 (nitric acid). Questions 6-8: lesson 3 (phosphorus compounds and oxoacids). Questions 9-10: lesson 4 (SO2 and sulphuric acid). Questions 11-15: lesson 5 (halogens, interhalogens and noble gases).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery