Revision notes

Unit 4 Transition and Inner Transition Elements: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Transition elements: position, electronic configuration, metallic nature, size and ionisation enthalpy

Outer configurations of the 3d series (after [Ar])
ElementScTiVCrMnFeCoNiCuZn
Z21222324252627282930
3d123556781010
4s2221222212

Two opposing effects in the 3d series

  • Pulls electrons in
    • Nuclear charge rises by one each step
    • 3d electrons shield it only partly
    • Effective nuclear charge rises slightly
  • Pushes electrons out
    • More 3d electrons
    • They repel the 4s electrons
    • Outer shell tends to expand
  • Net result
    • Radius falls Sc to V
    • Then nearly constant to Cu
    • Slight rise at Zn

Transition atoms lose 4s electrons before 3d. Half-filled (d⁵) and full (d¹⁰) subshells are extra stable: Cr 3d⁵ 4s¹, Cu 3d¹⁰ 4s¹.

Key takeaways: transition elements have (or form ions with) incomplete d subshells and fill groups 3–12. Melting points peak mid-series; 3d radii are nearly constant; 4d and 5d radii are nearly equal (lanthanoid contraction). Sums of ionisation enthalpies predict which oxidation state is more stable.

Read the full lesson

Lesson 2

Oxidation states and standard electrode potentials of the 3d series

Oxidation states of the 3d series, following the textbook's table
ElementScTiVCrMnFeCoNiCu
Main oxidation states+3+2, +3, +4+2 to +5+2 to +6+2 to +7+2 to +6+2 to +4+2 to +4+1, +2
Highest+3+4+5+6+7+6+4+4+2
Values as given in the Tamil Nadu textbook
CoupleTi²⁺/TiV²⁺/VCr²⁺/CrMn²⁺/MnFe²⁺/FeCo²⁺/CoNi²⁺/NiCu²⁺/CuZn²⁺/Zn
E° (V)−1.63−1.19−0.91−1.18−0.44−0.28−0.23+0.34−0.76
CoupleTi³⁺/Ti²⁺V³⁺/V²⁺Cr³⁺/Cr²⁺Mn³⁺/Mn²⁺Fe³⁺/Fe²⁺Co³⁺/Co²⁺
E° (V)−0.37−0.26−0.41+1.51+0.77+1.81

Cr²⁺ and Mn³⁺ are both d⁴, yet behave oppositely

  • Cr²⁺ (3d⁴)
    • Loses an electron easily
    • Becomes Cr³⁺ (3d³), a stable ion
    • E°(Cr³⁺/Cr²⁺) = −0.41 V
    • Strong reducing agent
  • Mn³⁺ (3d⁴)
    • Gains an electron easily
    • Becomes Mn²⁺ (3d⁵, half-filled)
    • E°(Mn³⁺/Mn²⁺) = +1.51 V
    • Strong oxidising agent

More negative E°(M²⁺/M) = stronger reducing metal. Negative E°(M³⁺/M²⁺): M²⁺ is reducing. Large positive E°(M³⁺/M²⁺): M³⁺ is oxidising.

Key takeaways: close (n−1)d and ns energies give variable oxidation states; the middle of the series (Mn, +2 to +7) shows the most. d⁵ and d¹⁰ configurations explain why Mn²⁺, Fe³⁺ and Zn²⁺ are favoured and why Mn and Zn have unusually negative E°(M²⁺/M). Copper's positive E° means it does not displace hydrogen. Cr²⁺ reduces, Mn³⁺ and Co³⁺ oxidise.

Read the full lesson

Lesson 3

Magnetic, catalytic and other properties of transition metals

Spin-only magnetic moment μ = √[n(n + 2)] BM, where n = number of unpaired electrons (BM = Bohr magneton).

Ion(s)Configurationnμ calculated (BM)μ observed (BM, textbook)
Sc³⁺, Ti⁴⁺d⁰00Diamagnetic
Ti³⁺, V⁴⁺d¹1√3 = 1.731.75
V³⁺, Ti²⁺d²2√8 = 2.832.76
Cr³⁺, V²⁺d³3√15 = 3.873.86
Cr²⁺, Mn³⁺d⁴4√24 = 4.904.80
Mn²⁺, Fe³⁺d⁵5√35 = 5.925.96
Fe²⁺, Co³⁺d⁶44.905.3–5.5
Co²⁺d⁷33.874.4–5.2
Ni²⁺d⁸22.832.9–3.4
Cu²⁺d⁹11.731.8–2.2
Cu⁺, Zn²⁺d¹⁰00Diamagnetic

Oxides of chromium: rising oxidation state

  1. CrO, +2 Basic, more ionic
  2. Cr₂O₃, +3 Amphoteric
  3. CrO₃, +6 Acidic, more covalent; gives chromic acid

Key takeaways: unpaired electrons make ions paramagnetic, with μ = √[n(n + 2)] BM; d⁰ and d¹⁰ ions are diamagnetic. Available d orbitals and variable oxidation states make transition metals good catalysts (Ni, V₂O₅, Co₂(CO)₈, Ziegler–Natta). Similar sizes favour alloys; small atoms in holes give hard interstitial compounds; higher oxidation states give more acidic, covalent oxides.

Read the full lesson

Lesson 4

Potassium dichromate and potassium permanganate

Potassium dichromate from chromite ore

  1. Concentrate chromite FeCr₂O₄, by gravity separation
  2. Roast with Na₂CO₃ and lime in air 4FeCr₂O₄ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂ (about 900–1000 °C)
  3. Leach with water Soluble yellow Na₂CrO₄ separates from insoluble Fe₂O₃
  4. Acidify with conc. H₂SO₄ 2Na₂CrO₄ + H₂SO₄ → Na₂Cr₂O₇ + Na₂SO₄ + H₂O; Na₂SO₄ crystallises out
  5. Add KCl Na₂Cr₂O₇ + 2KCl → K₂Cr₂O₇ + 2NaCl; NaCl removed hot, K₂Cr₂O₇ crystallises on cooling

Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O (orange → green; Cr +6 → +3)

MediumHalf-equationMn changeElectronsEquivalent weight of KMnO₄ (M = 158)
Acidic (dilute H₂SO₄)MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O+7 → +25158 ÷ 5 = 31.6
Neutral or weakly alkalineMnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻+7 → +43158 ÷ 3 = 52.67
Strongly alkalineMnO₄⁻ + e⁻ → MnO₄²⁻+7 → +61158 ÷ 1 = 158

Key takeaways: K₂Cr₂O₇ comes from chromite (roast → Na₂CrO₄ → Na₂Cr₂O₇ → K₂Cr₂O₇); orange dichromate becomes green Cr³⁺ with 6 electrons per ion; the chromyl chloride test identifies chloride. KMnO₄ comes from pyrolusite via green K₂MnO₄; it takes 5, 3 or 1 electrons in acid, neutral or strongly alkaline medium, giving equivalent weights 31.6, 52.67 and 158.

Read the full lesson

Lesson 5

Inner transition elements: lanthanoids and actinoids

IonConfigurationReason for stability
Gd³⁺[Xe]₄f⁷Half-filled 4f
Lu³⁺[Xe]₄f¹⁴Completely filled 4f
Ce⁴⁺[Xe]₄f⁰Empty 4f (noble-gas core)
Tb⁴⁺[Xe]₄f⁷Half-filled 4f
Eu²⁺[Xe]₄f⁷Half-filled 4f
Yb²⁺[Xe]₄f¹⁴Completely filled 4f; diamagnetic

Cause and consequences of the lanthanoid contraction

  1. Nuclear charge +1 each step Electron added to inner 4f
  2. Poor shielding by diffuse 4f Effective nuclear charge rises
  3. Ln³⁺ radius shrinks gradually The lanthanoid contraction
  4. Consequences Basicity falls La(OH)₃ to Lu(OH)₃; lanthanoids very alike; 4d and 5d elements nearly the same size
FeatureLanthanoidsActinoids
Differentiating electron4f5f
Binding energy of f orbitalsHigher (4f held tightly)Lower (5f less tightly held)
Oxidation states+3; a few +2 and +4+3 and also +4, +5, +6, +7
Complex formationLess tendencyGreater tendency
Colour of ionsDescribed in the textbook as mostly colourless (many Ln³⁺ ions are in fact pale coloured)Most are coloured: U³⁺ red, U⁴⁺ green, UO₂²⁺ yellow
Oxo cationsNot formedFormed, e.g. UO₂²⁺, NpO₂²⁺
RadioactivityMostly not radioactive (promethium is)All are radioactive

Lanthanoid contraction: poor shielding by 4f electrons shrinks Ln³⁺ from La to Lu, so basicity falls and Zr and Hf are almost the same size.

Key takeaways: lanthanoids (Ce–Lu, 4f) and actinoids (Th–Lr, 5f) sit apart because each series is chemically alike. The +3 state is common; +2 and +4 appear when the f subshell becomes empty, half-filled or full (Ce⁴⁺, Eu²⁺, Tb⁴⁺, Yb²⁺). Poor 4f shielding causes the lanthanoid contraction. Actinoids are all radioactive, show higher oxidation states up to +7, form oxo cations and more complexes.

Read the full lesson

Privacy · Terms · Refunds · Delivery