• Practice
  • About 24 min
  • 5 practice questions

Oxidation states and standard electrode potentials of the 3d series

Explain the variable oxidation states of transition metals and why the middle elements show the most, and use E°(M²⁺/M) and E°(M³⁺/M²⁺) values to predict stability, reducing and oxidising power.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the oxidation states of the 3d elements and explain the pattern.
  • Relate the stability of Mn²⁺, Fe³⁺ and Cu⁺ to half-filled and filled subshells.
  • Explain the trend in E°(M²⁺/M) and the anomalies of Mn, Zn and Cu.
  • Use E°(M³⁺/M²⁺) values to explain why Cr²⁺ is reducing and Mn³⁺ and Co³⁺ are oxidising.

A striking property of transition metals is variable oxidation state: manganese, for example, ranges from +2 in MnSO₄ to +7 in KMnO₄. This lesson explains where those states come from and how electrode potentials tell us which state survives in water.

Why the oxidation states vary

The (n−1)d and ns orbitals are very close in energy, so electrons from both can be lost. Scandium shows only +3; every other element shows several states. The number of states grows with the number of electrons available and shrinks as d electrons pair up, so the first and last elements show few states and the middle ones the most: Sc only +3, Mn from +2 to +7, Cu only +1 and +2. At the start of the series +3 is the common stable state; towards the end +2 becomes more stable.

Oxidation states of the 3d series, following the textbook's table
ElementScTiVCrMnFeCoNiCu
Main oxidation states+3+2, +3, +4+2 to +5+2 to +6+2 to +7+2 to +6+2 to +4+2 to +4+1, +2
Highest+3+4+5+6+7+6+4+4+2

Half-filled and filled subshells affect stability: Mn²⁺ (3d⁵) is more stable than Mn⁴⁺ (3d³), and Fe³⁺ (3d⁵) is more stable than Fe²⁺ (3d⁶). In the 4d and 5d series, oxidation states run from +3 (Y, La) up to +8 (Ru, Os), and the highest states appear with very electronegative partners such as O, F and Cl: RuO₄, OsO₄, WCl₆. Down a group, higher oxidation states become more stable and lower ones less stable (the opposite of the p-block's inert pair effect). The textbook's Frost diagram shows +3 as the most stable state for Ti, V and Cr, similar stability of +2 and +3 for Fe, and Cu as the only 3d metal with a +1 state, which tends to disproportionate into +2 and 0.

Worked example 1: why Fe³⁺ is more stable than Fe²⁺, but Mn²⁺ more stable than Mn³⁺

Working: Fe²⁺ is 3d⁶; losing one more electron gives Fe³⁺, 3d⁵, a half-filled subshell, so the change is favourable. Mn²⁺ is already 3d⁵; making Mn³⁺ (3d⁴) would destroy the half-filled subshell, so Mn²⁺ resists oxidation. The same configuration, d⁵, is the stable one in both cases.

Standard electrode potentials E°(M²⁺/M)

The more negative the standard reduction potential of a metal, the more easily it loses electrons and the stronger it is as a reducing agent. (Standard conditions are 1 bar or 1 atm, 1 M solutions and 298 K.)

Values as given in the Tamil Nadu textbook
CoupleTi²⁺/TiV²⁺/VCr²⁺/CrMn²⁺/MnFe²⁺/FeCo²⁺/CoNi²⁺/NiCu²⁺/CuZn²⁺/Zn
E° (V)−1.63−1.19−0.91−1.18−0.44−0.28−0.23+0.34−0.76
  • From Ti to Cu the values become less negative: the metals become weaker reducing agents.
  • Copper alone is positive: Cu is more stable than Cu²⁺ in water, so copper does not liberate hydrogen from dilute acids.
  • Mn and Zn are more negative than the trend predicts, because Mn²⁺ (3d⁵) and Zn²⁺ (3d¹⁰) have extra-stable configurations, which favour forming these ions.

Worked example 2: can Fe³⁺ oxidise copper?

E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(Cu²⁺/Cu) = +0.34 V. For 2Fe³⁺ + Cu → 2Fe²⁺ + Cu²⁺, E°cell = E°(cathode) − E°(anode) = 0.77 − 0.34 = +0.43 V. Positive, so ΔG° = −nFE° = −2 × 96,485 × 0.43 = −82,977 J ≈ −83 kJ: the reaction is feasible. This is why iron(III) chloride solution is used to etch copper.

E°(M³⁺/M²⁺): which state is more stable?

CoupleTi³⁺/Ti²⁺V³⁺/V²⁺Cr³⁺/Cr²⁺Mn³⁺/Mn²⁺Fe³⁺/Fe²⁺Co³⁺/Co²⁺
E° (V)−0.37−0.26−0.41+1.51+0.77+1.81
  • Negative values (Ti, V, Cr): the M³⁺ state is preferred and M²⁺ is easily oxidised, so Cr²⁺ is a strong reducing agent (it becomes Cr³⁺, 3d³, which is stable). Reducing Cr³⁺ back needs a strong reductant such as zinc (E° = −0.76 V).
  • Mn: +1.51 V: Mn³⁺ (3d⁴) is readily reduced to Mn²⁺ (3d⁵, half-filled), so Mn³⁺ is a strong oxidising agent.
  • Fe: +0.77 V: a moderate value; both Fe³⁺ and Fe²⁺ exist under ordinary conditions. The drop from Mn to Fe reflects that it is now the +3 ion (Fe³⁺, 3d⁵) that has the half-filled subshell.
  • Co: +1.81 V: Co³⁺ is a very strong oxidant and is unstable in water as a simple ion.

Cr²⁺ and Mn³⁺ are both d⁴, yet behave oppositely

  • Cr²⁺ (3d⁴)
    • Loses an electron easily
    • Becomes Cr³⁺ (3d³), a stable ion
    • E°(Cr³⁺/Cr²⁺) = −0.41 V
    • Strong reducing agent
  • Mn³⁺ (3d⁴)
    • Gains an electron easily
    • Becomes Mn²⁺ (3d⁵, half-filled)
    • E°(Mn³⁺/Mn²⁺) = +1.51 V
    • Strong oxidising agent

Worked example 3: which is the stronger reducing agent, Cr²⁺ or Fe²⁺?

Compare the oxidation potentials (reverse sign of the reduction potentials): Cr²⁺ → Cr³⁺ + e⁻, E° = +0.41 V; Fe²⁺ → Fe³⁺ + e⁻, E° = −0.77 V. The larger (more positive) oxidation potential belongs to Cr²⁺, so Cr²⁺ is the stronger reducing agent. Fe²⁺ can still be oxidised, but only by stronger oxidants such as acidified KMnO₄ or K₂Cr₂O₇.

More negative E°(M²⁺/M) = stronger reducing metal. Negative E°(M³⁺/M²⁺): M²⁺ is reducing. Large positive E°(M³⁺/M²⁺): M³⁺ is oxidising.

Key takeaways: close (n−1)d and ns energies give variable oxidation states; the middle of the series (Mn, +2 to +7) shows the most. d⁵ and d¹⁰ configurations explain why Mn²⁺, Fe³⁺ and Zn²⁺ are favoured and why Mn and Zn have unusually negative E°(M²⁺/M). Copper's positive E° means it does not displace hydrogen. Cr²⁺ reduces, Mn³⁺ and Co³⁺ oxidise.

Check your understanding

  1. 1. Among the 3d metals Ti, Cu, Mn and Zn, which has the most negative E°(M²⁺/M) according to the textbook's values?

    1. Cu
    2. Zn
    3. Mn
    4. Ti
    Show answer

    Answer: D. Ti²⁺/Ti = −1.63 V is the most negative of these (Mn −1.18 V, Zn −0.76 V, Cu +0.34 V).

  2. 2. Which element of the 3d series shows the largest number of oxidation states?

    1. Sc
    2. Mn
    3. Cu
    4. Zn
    Show answer

    Answer: B. Manganese, with five 3d and two 4s electrons, shows states from +2 to +7. Sc shows only +3, Cu +1 and +2, Zn only +2.

  3. 3. E°(Mn³⁺/Mn²⁺) = +1.51 V while E°(Fe³⁺/Fe²⁺) = +0.77 V. The main reason for the difference is

    1. Mn²⁺ is 3d⁵ (half-filled), so Mn³⁺ is readily reduced to it
    2. iron is more reactive than manganese
    3. Fe³⁺ is 3d⁶
    4. Mn³⁺ is 3d⁵
    Show answer

    Answer: A. Mn³⁺ (3d⁴) gains an electron to become the half-filled 3d⁵ Mn²⁺, which is very favourable. For iron, it is Fe³⁺ that is 3d⁵, so reducing it to Fe²⁺ (3d⁶) is less favourable.

  4. 4. Why is E°(Cu²⁺/Cu) positive?

    1. Copper has a half-filled d subshell.
    2. Cu²⁺ is 3d¹⁰.
    3. The energy needed to atomise and ionise copper is not fully recovered by the hydration of Cu²⁺, so Cu is more stable than Cu²⁺ in water.
    4. Copper is an s-block element.
    Show answer

    Answer: C. Copper has a high enthalpy of atomisation and a large IE₂; the hydration enthalpy of Cu²⁺ does not compensate fully, so the metal is favoured over the ion and E° is positive. Cu²⁺ is 3d⁹, not 3d¹⁰.

  5. 5. For 2Fe³⁺ + Cu → 2Fe²⁺ + Cu²⁺, with E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(Cu²⁺/Cu) = +0.34 V, E°cell is

    1. +1.11 V
    2. −0.43 V
    3. +0.43 V
    4. +0.77 V
    Show answer

    Answer: C. Fe³⁺ is reduced (cathode) and Cu oxidised (anode): E°cell = 0.77 − 0.34 = +0.43 V. Positive, so the reaction is feasible.

Privacy · Terms · Refunds · Delivery