- Practice
- About 28 min
- 5 practice questions
Potassium dichromate and potassium permanganate
Prepare K₂Cr₂O₇ from chromite and KMnO₄ from pyrolusite, describe their structures, write their oxidising reactions in different media with balanced equations, explain the chromyl chloride test, and calculate equivalent weights and mole ratios.
If something looks wrong, please tell us.
By the end of this lesson you can
- Prepare potassium dichromate from chromite ore and explain the chromate–dichromate equilibrium.
- Write balanced ionic equations for dichromate oxidations and the chromyl chloride test.
- Prepare potassium permanganate from pyrolusite by chemical and electrolytic oxidation.
- Write permanganate's half-equations in acidic, neutral and alkaline media and use them for equivalent weights and mole ratios.
K₂Cr₂O₇ and KMnO₄ are the two most important oxidising agents of the laboratory. Both contain the metal in its highest oxidation state (Cr +6, Mn +7), and both change colour sharply when reduced, which makes them ideal for titrations.
Potassium dichromate, K₂Cr₂O₇
Potassium dichromate from chromite ore
- Concentrate chromite FeCr₂O₄, by gravity separation
- Roast with Na₂CO₃ and lime in air 4FeCr₂O₄ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂ (about 900–1000 °C)
- Leach with water Soluble yellow Na₂CrO₄ separates from insoluble Fe₂O₃
- Acidify with conc. H₂SO₄ 2Na₂CrO₄ + H₂SO₄ → Na₂Cr₂O₇ + Na₂SO₄ + H₂O; Na₂SO₄ crystallises out
- Add KCl Na₂Cr₂O₇ + 2KCl → K₂Cr₂O₇ + 2NaCl; NaCl removed hot, K₂Cr₂O₇ crystallises on cooling
Check the roasting equation: Fe 4 = 4; Cr 8 = 8; Na 16 = 16; C 8 = 8; O 16 + 24 + 14 = 54 and 32 + 6 + 16 = 54. Chromium goes from +3 to +6 and iron from +2 to +3; oxygen is the oxidising agent.
Properties: orange-red crystals melting at 671 K, moderately soluble in cold water and very soluble in hot. On strong heating, 4K₂Cr₂O₇ → 4K₂CrO₄ + 2Cr₂O₃ + 3O₂ (check: K 8; Cr 8 = 4 + 4; O 28 = 16 + 6 + 6). (Because of toxic chromium fumes, it is now often replaced by sodium dichromate in industry.)
Structure: in the chromate ion CrO₄²⁻ chromium is tetrahedrally surrounded by four O; the dichromate ion Cr₂O₇²⁻ is two CrO₄ tetrahedra sharing one corner oxygen (Cr–O–Cr). Chromium is +6 in both. They interconvert with pH: 2CrO₄²⁻ (yellow) + 2H⁺ ⇌ Cr₂O₇²⁻ (orange) + H₂O. Dichromate dominates in acid, chromate in alkali.
Oxidising reactions of dichromate (acid medium)
Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O (orange → green; Cr +6 → +3)
- Ferrous to ferric: Cr₂O₇²⁻ + 6Fe²⁺ + 14H⁺ → 2Cr³⁺ + 6Fe³⁺ + 7H₂O (charge: −2 + 12 + 14 = 24 = 6 + 18).
- Iodide to iodine: Cr₂O₇²⁻ + 6I⁻ + 14H⁺ → 2Cr³⁺ + 3I₂ + 7H₂O.
- Sulphide to sulphur: Cr₂O₇²⁻ + 3S²⁻ + 14H⁺ → 2Cr³⁺ + 3S + 7H₂O.
- Sulphur dioxide to sulphate: Cr₂O₇²⁻ + 3SO₂ + 2H⁺ → 2Cr³⁺ + 3SO₄²⁻ + H₂O (O: 7 + 6 = 12 + 1; charge 0 = 0).
- Stannous to stannic: Cr₂O₇²⁻ + 3Sn²⁺ + 14H⁺ → 2Cr³⁺ + 3Sn⁴⁺ + 7H₂O.
- Ethanol to ethanoic acid: 2K₂Cr₂O₇ + 8H₂SO₄ + 3C₂H₅OH → 2K₂SO₄ + 2Cr₂(SO₄)₃ + 3CH₃COOH + 11H₂O.
- H₂S passed into acidified dichromate gives a milky precipitate of sulphur.
Chromyl chloride test for chloride ion
A chloride heated with K₂Cr₂O₇ and concentrated H₂SO₄ gives orange-red vapours of chromyl chloride: K₂Cr₂O₇ + 4NaCl + 6H₂SO₄ → 2KHSO₄ + 4NaHSO₄ + 2CrO₂Cl₂ + 3H₂O (check: Cr 2; Cl 4; S 6; H 12 = 2 + 4 + 6; O 7 + 24 = 31 = 8 + 16 + 4 + 3). The vapour is passed into NaOH (CrO₂Cl₂ + 4NaOH → Na₂CrO₄ + 2NaCl + 2H₂O), the yellow solution acidified with acetic acid and treated with lead acetate: a yellow precipitate of lead chromate, PbCrO₄, confirms chloride. (Concentrated acids and chromium(VI) are hazardous; this test is done by or under a teacher, in a fume cupboard.)
Uses: strong oxidising agent; dyeing and printing; chrome tanning of leather; estimating iron(II) compounds and iodides in quantitative analysis.
Potassium permanganate, KMnO₄
Step 1, potassium manganate: powdered pyrolusite is fused with KOH in air (or with KNO₃ or KClO₃): 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O, a green product (Mn +4 → +6). Step 2, oxidation to permanganate, either chemically, 2MnO₄²⁻ + Cl₂ → 2MnO₄⁻ + 2Cl⁻ (or with ozone: 2MnO₄²⁻ + O₃ + H₂O → 2MnO₄⁻ + 2OH⁻ + O₂), or electrolytically in slightly alkaline solution: at the anode MnO₄²⁻ (green) → MnO₄⁻ (purple) + e⁻; at the cathode 2H⁺ + 2e⁻ → H₂. The purple solution is concentrated and KMnO₄ crystallises.
Properties: dark purple crystals melting at 513 K, sparingly soluble in cold water and fairly soluble in hot. The permanganate ion is tetrahedral (the textbook describes Mn⁷⁺ as d³s hybridised). On heating, 2KMnO₄ → K₂MnO₄ + MnO₂ + O₂. With cold concentrated H₂SO₄ it gives Mn₂O₇, which decomposes explosively (2Mn₂O₇ → 4MnO₂ + 3O₂); with hot concentrated H₂SO₄, 4KMnO₄ + 6H₂SO₄ → 4MnSO₄ + 2K₂SO₄ + 6H₂O + 5O₂. (Never attempt these in a school laboratory.)
Oxidising action of permanganate in three media
| Medium | Half-equation | Mn change | Electrons | Equivalent weight of KMnO₄ (M = 158) |
|---|---|---|---|---|
| Acidic (dilute H₂SO₄) | MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O | +7 → +2 | 5 | 158 ÷ 5 = 31.6 |
| Neutral or weakly alkaline | MnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻ | +7 → +4 | 3 | 158 ÷ 3 = 52.67 |
| Strongly alkaline | MnO₄⁻ + e⁻ → MnO₄²⁻ | +7 → +6 | 1 | 158 ÷ 1 = 158 |
- Neutral: 2MnO₄⁻ + 3H₂S → 2MnO₂ + 3S + 2OH⁻ + 2H₂O; 8MnO₄⁻ + 3S₂O₃²⁻ + H₂O → 8MnO₂ + 6SO₄²⁻ + 2OH⁻.
- Alkaline: manganate formed may be reduced further to MnO₂, so the overall change can match the neutral one. Baeyer's reagent (cold, dilute, alkaline KMnO₄) converts alkenes to diols, e.g. ethene to ethylene glycol; the loss of the purple colour is a test for unsaturation.
- Acidic: Fe²⁺ to Fe³⁺: MnO₄⁻ + 5Fe²⁺ + 8H⁺ → Mn²⁺ + 5Fe³⁺ + 4H₂O; iodide: 2MnO₄⁻ + 10I⁻ + 16H⁺ → 2Mn²⁺ + 5I₂ + 8H₂O; oxalate: 2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O; sulphide: 2MnO₄⁻ + 5S²⁻ + 16H⁺ → 2Mn²⁺ + 5S + 8H₂O; nitrite: 2MnO₄⁻ + 5NO₂⁻ + 6H⁺ → 2Mn²⁺ + 5NO₃⁻ + 3H₂O; sulphite: 2MnO₄⁻ + 5SO₃²⁻ + 6H⁺ → 2Mn²⁺ + 5SO₄²⁻ + 3H₂O; ethanol to ethanal: 2KMnO₄ + 3H₂SO₄ + 5C₂H₅OH → K₂SO₄ + 2MnSO₄ + 5CH₃CHO + 8H₂O.
Why H₂SO₄ and not HCl or HNO₃? HCl is oxidised by permanganate (2MnO₄⁻ + 10Cl⁻ + 16H⁺ → 2Mn²⁺ + 5Cl₂ + 8H₂O), wasting it; HNO₃ is itself an oxidant and would react with the reducing agent being titrated. Dilute H₂SO₄ does neither. Uses: strong oxidant; treating skin and fungal infections; removing iron and H₂S from well water; Baeyer's test; estimating Fe²⁺, oxalates, H₂O₂ and iodides.
Worked example 1: iodine from dichromate
How many moles of I₂ does 1 mol of K₂Cr₂O₇ liberate from excess KI in acid? Working: Cr₂O₇²⁻ + 6e⁻ → 2Cr³⁺ takes 6 electrons; 2I⁻ → I₂ + 2e⁻ gives 2 electrons per I₂. So 6 ÷ 2 = 3 mol I₂ (Cr₂O₇²⁻ + 6I⁻ + 14H⁺ → 2Cr³⁺ + 3I₂ + 7H₂O).
Worked example 2: permanganate needed for ferrous oxalate
How many moles of acidified KMnO₄ oxidise 1 mol of FeC₂O₄? Working: Fe²⁺ → Fe³⁺ gives 1 e⁻; C₂O₄²⁻ → 2CO₂ gives 2 e⁻ (C +3 → +4, two carbons). Total = 3 e⁻ per FeC₂O₄. Each MnO₄⁻ takes 5 e⁻. Moles of KMnO₄ = 3 ÷ 5 = 0.6 mol.
Worked example 3: titration with permanganate
25.0 mL of an iron(II) solution needs 20.0 mL of 0.0200 M KMnO₄ in acid (made-up practice data). Find [Fe²⁺]. Working: moles MnO₄⁻ = 0.0200 × 0.0200 L = 4.00 × 10⁻⁴ mol. Ratio MnO₄⁻ : Fe²⁺ = 1 : 5, so Fe²⁺ = 5 × 4.00 × 10⁻⁴ = 2.00 × 10⁻³ mol. Concentration = 2.00 × 10⁻³ ÷ 0.0250 L = 0.0800 M. Permanganate is its own indicator: the first permanent pink marks the end point.
Key takeaways: K₂Cr₂O₇ comes from chromite (roast → Na₂CrO₄ → Na₂Cr₂O₇ → K₂Cr₂O₇); orange dichromate becomes green Cr³⁺ with 6 electrons per ion; the chromyl chloride test identifies chloride. KMnO₄ comes from pyrolusite via green K₂MnO₄; it takes 5, 3 or 1 electrons in acid, neutral or strongly alkaline medium, giving equivalent weights 31.6, 52.67 and 158.
Check your understanding
-
1. In acid medium, permanganate oxidises oxalic acid to
- oxalate ion
- carbon monoxide
- carbon dioxide
- formic acid
Show answer
Answer: C. 2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O. Carbon goes from +3 to +4, in CO₂.
-
2. The equivalent weight of KMnO₄ (M = 158) in neutral medium is
- 158
- 31.6
- 79
- 52.67
Show answer
Answer: D. In neutral medium MnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻: 3 electrons, so 158 ÷ 3 = 52.67.
-
3. Which statement is NOT true?
- H₂S passed into acidified K₂Cr₂O₇ gives a milky colour.
- Na₂Cr₂O₇ is preferred over K₂Cr₂O₇ in volumetric analysis.
- Acidic K₂Cr₂O₇ solution is orange.
- K₂Cr₂O₇ solution turns yellow when the pH is raised above 7.
Show answer
Answer: B. K₂Cr₂O₇ is preferred as a primary standard because it is not hygroscopic; sodium dichromate absorbs moisture. The other statements are true: sulphur makes the solution milky, dichromate is orange, and in alkali it becomes yellow chromate.
-
4. The orange-red vapour formed in the chromyl chloride test is
- CrO₂Cl₂
- CrCl₃
- Cl₂
- PbCrO₄
Show answer
Answer: A. K₂Cr₂O₇ + 4NaCl + 6H₂SO₄ → 2KHSO₄ + 4NaHSO₄ + 2CrO₂Cl₂ + 3H₂O. Chromyl chloride is the orange-red vapour; PbCrO₄ is the yellow precipitate formed later.
-
5. Why is hydrochloric acid not used to acidify KMnO₄ in titrations?
- It is a weak acid.
- It precipitates MnO₂.
- It reduces the H⁺ concentration.
- Permanganate oxidises chloride to chlorine, so some KMnO₄ is wasted.
Show answer
Answer: D. 2MnO₄⁻ + 10Cl⁻ + 16H⁺ → 2Mn²⁺ + 5Cl₂ + 8H₂O. Part of the permanganate would oxidise the chloride rather than the substance being estimated, giving a wrong result.
Sign in to keep track of the lessons you finish.