• Practice
  • About 24 min
  • 5 practice questions

Magnetic, catalytic and other properties of transition metals

Calculate spin-only magnetic moments, explain why transition metals and their compounds are good catalysts, and describe alloy formation, interstitial compounds, complexes and the acid-base nature of their oxides.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Tell diamagnetic, paramagnetic and ferromagnetic substances apart.
  • Use μ = √[n(n + 2)] BM to find the magnetic moment of an ion, and work back from a moment to n.
  • Explain catalysis by transition metals with examples.
  • State the Hume-Rothery conditions for alloys, describe interstitial compounds and complexes, and relate oxide character to oxidation state.

Transition metal ions are often magnetic, coloured and catalytically active, and the metals blend into countless alloys. All these properties come from the partly filled d subshell.

Magnetic properties

A spinning electron moving around the nucleus behaves like a tiny magnet. Diamagnetic substances have all electrons paired; they are weakly repelled by a magnetic field. Paramagnetic substances have unpaired electrons, whose magnetic dipoles are randomly oriented without a field but line up with an applied field, so they are attracted. Ferromagnetic materials (iron, cobalt, nickel) have domains in which dipoles are aligned, giving strong, sometimes permanent, magnetism. Most compounds of transition elements are paramagnetic.

For 3d ions in solids, the orbital contribution is largely quenched, so the moment comes from spin only: μ = g√[S(S + 1)] μB with g = 2 and S = n/2, which simplifies to:

Spin-only magnetic moment μ = √[n(n + 2)] BM, where n = number of unpaired electrons (BM = Bohr magneton).

Ion(s)Configurationnμ calculated (BM)μ observed (BM, textbook)
Sc³⁺, Ti⁴⁺d⁰00Diamagnetic
Ti³⁺, V⁴⁺d¹1√3 = 1.731.75
V³⁺, Ti²⁺d²2√8 = 2.832.76
Cr³⁺, V²⁺d³3√15 = 3.873.86
Cr²⁺, Mn³⁺d⁴4√24 = 4.904.80
Mn²⁺, Fe³⁺d⁵5√35 = 5.925.96
Fe²⁺, Co³⁺d⁶44.905.3–5.5
Co²⁺d⁷33.874.4–5.2
Ni²⁺d⁸22.832.9–3.4
Cu²⁺d⁹11.731.8–2.2
Cu⁺, Zn²⁺d¹⁰00Diamagnetic

For d⁶ to d⁹ the electrons start to pair (Hund's rule), so n = 10 − (number of d electrons) for d⁶ onwards in these high-spin ions: d⁶ has 4 unpaired, d⁷ has 3, d⁸ has 2 and d⁹ has 1.

Worked example 1: magnetic moments of Ti³⁺ and Mn²⁺

Ti³⁺: Ti is 3d² 4s²; losing 3 electrons leaves 3d¹, n = 1, μ = √(1 × 3) = √3 = 1.73 BM. Mn²⁺: Mn is 3d⁵ 4s²; losing 2 leaves 3d⁵, five singly occupied orbitals, n = 5, μ = √(5 × 7) = √35 = 5.92 BM.

Worked example 2: working back from a measured moment

An ion of a 3d metal has μ = 3.87 BM. Working: n(n + 2) = 3.87² ≈ 15.0. Try n = 3: 3 × 5 = 15. So n = 3, a d³ or d⁷ ion, such as Cr³⁺ (3d³) or Co²⁺ (3d⁷).

Catalytic properties

Catalysed processes save energy, reduce waste and raise yields, which is why industry relies on them. Transition metals are good catalysts because (1) they have energetically available d orbitals that can accept electrons from reactants, or d electrons that can bond to reactants, so reactants are held on the surface and their bonds weakened; and (2) they show variable oxidation states, so they can pass electrons back and forth.

  • Hydrogenation of alkenes over Ni: the alkene's π electrons bond to an empty d orbital; the H–H σ bond breaks and each H bonds to the metal; the two H atoms then add to the alkene to give an alkane.
  • Contact process: V₂O₅ oxidises SO₂ to SO₃ and is itself reduced to VO₂ (V +5 → +4), then reoxidised by oxygen: variable oxidation state at work.
  • Hydroformylation: propene + CO + H₂ over Co₂(CO)₈ gives butanal and 2-methylpropanal.
  • Acetic acid by carbonylation: carbon monoxide is joined to methanol over a rhodium or iridium complex catalyst (the textbook writes the starting material as acetaldehyde; the industrial process starts from methanol).
  • Ziegler–Natta catalyst: TiCl₄ with triethylaluminium, Al(C₂H₅)₃, polymerises propylene to polypropylene.

Alloy formation

An alloy is a metal blended with one or more other elements; the main metal is the solvent and the minor ones the solute. By the Hume-Rothery rules, a substitutional alloy forms when the atomic radii of solvent and solute differ by less than 15%, the two have the same crystal structure and valence, and their electronegativities are nearly equal. Transition metals meet these conditions with one another because their atomic sizes are so similar, so they form many hard, high-melting alloys: ferrous alloys (steels), gold–copper alloys, chrome alloys.

Worked example 3: applying the 15% rule

Suppose a solvent metal has an atomic radius of 128 pm and two candidate solutes have radii of 125 pm and 160 pm (illustrative values). Working: difference for the first = (128 − 125) ÷ 128 × 100 = 2.3%, well under 15%, so a substitutional alloy is possible. For the second = (160 − 128) ÷ 128 × 100 = 25%, over 15%, so extensive substitution is unlikely.

Interstitial compounds

Small atoms such as H, B, C and N can occupy the holes (interstices) in a metal lattice, giving interstitial compounds, usually non-stoichiometric: for example TiC, ZrH₁.₉₂ and Mn₄N. They are hard and conduct heat and electricity, have melting points higher than the pure metals, the hydrides are powerful reducing agents and the carbides are chemically inert.

Complexes and oxides

Transition metal ions are small, highly charged and have vacant low-energy orbitals to accept electron pairs, so they form many coordination complexes, for example [Fe(CN)₆]⁴⁻ and [Co(NH₃)₆]³⁺ (studied in unit 5). Their oxides form when the metals are heated in oxygen. Except scandium, they form ionic oxides with oxidation numbers +2 to +7. As the oxidation number rises, ionic character falls and acidic character rises: CrO (+2) is basic, Cr₂O₃ (+3) amphoteric, CrO₃ (+6) acidic (giving H₂CrO₄ and H₂Cr₂O₇), and Mn₂O₇ (+7) is covalent and acidic, dissolving in water to give permanganic acid HMnO₄.

Oxides of chromium: rising oxidation state

  1. CrO, +2 Basic, more ionic
  2. Cr₂O₃, +3 Amphoteric
  3. CrO₃, +6 Acidic, more covalent; gives chromic acid

Key takeaways: unpaired electrons make ions paramagnetic, with μ = √[n(n + 2)] BM; d⁰ and d¹⁰ ions are diamagnetic. Available d orbitals and variable oxidation states make transition metals good catalysts (Ni, V₂O₅, Co₂(CO)₈, Ziegler–Natta). Similar sizes favour alloys; small atoms in holes give hard interstitial compounds; higher oxidation states give more acidic, covalent oxides.

Check your understanding

  1. 1. The spin-only magnetic moment of Mn²⁺ is

    1. 2.83 BM
    2. 5.92 BM
    3. 3.87 BM
    4. 4.90 BM
    Show answer

    Answer: B. Mn²⁺ is 3d⁵ with five unpaired electrons: μ = √(5 × 7) = √35 = 5.92 BM.

  2. 2. Which ion has the same number of unpaired electrons as V³⁺?

    1. Ti³⁺
    2. Fe³⁺
    3. Cr³⁺
    4. Ni²⁺
    Show answer

    Answer: D. V³⁺ is 3d² (2 unpaired). Ni²⁺ is 3d⁸, which also has 2 unpaired electrons. Ti³⁺ (d¹) has 1, Cr³⁺ (d³) has 3, Fe³⁺ (d⁵) has 5.

  3. 3. Which ion is diamagnetic?

    1. Cu²⁺
    2. Ti³⁺
    3. Zn²⁺
    4. Fe²⁺
    Show answer

    Answer: C. Zn²⁺ is 3d¹⁰, all electrons paired, so μ = 0 and it is diamagnetic. Cu²⁺ (d⁹), Ti³⁺ (d¹) and Fe²⁺ (d⁶) all have unpaired electrons.

  4. 4. In the contact process, V₂O₅ acts as a catalyst mainly because

    1. vanadium can change between oxidation states (+5 and +4)
    2. it is diamagnetic
    3. it forms an interstitial compound
    4. it is an amphoteric oxide
    Show answer

    Answer: A. V₂O₅ oxidises SO₂ to SO₃ and is reduced to VO₂; oxygen then reoxidises it to V₂O₅. The cycle depends on vanadium's variable oxidation state.

  5. 5. Which of these oxides is the most acidic?

    1. CrO
    2. Cr₂O₃
    3. MnO
    4. CrO₃
    Show answer

    Answer: D. Acidic character rises with oxidation number: CrO (+2) basic, Cr₂O₃ (+3) amphoteric, CrO₃ (+6) acidic. MnO (+2) is basic.

Privacy · Terms · Refunds · Delivery