- Practice
- About 24 min
- 5 practice questions
Transition elements: position, electronic configuration, metallic nature, size and ionisation enthalpy
Define transition elements, place the 3d, 4d and 5d series, write configurations including Cr and Cu, and explain the trends in melting point, atomic radius and ionisation enthalpy across a series.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the IUPAC definition of a transition element and explain why Zn, Cd and Hg are still studied with them.
- Write the electronic configurations of the 3d series, including the exceptions Cr and Cu.
- Explain the rise and fall of melting points and the near-constant atomic radii across the 3d series.
- Use ionisation enthalpies to compare the stability of Ni(II) and Pt(II), and of Ni(IV) and Pt(IV).
Iron and copper shaped human civilisation, and many other transition metals are just as useful: tungsten in lamp filaments, titanium in artificial joints, platinum in catalysts. They matter to life too, such as iron in haemoglobin and cobalt in vitamin B₁₂. This unit of the Tamil Nadu textbook studies the d-block (especially the 3d series), two of its key compounds, K₂Cr₂O₇ and KMnO₄, and then the f-block.
What is a transition element?
Broadly, metals with an incompletely filled d or f subshell in the atom or a common ion are called transition metals. IUPAC defines a transition metal as an element whose atom has an incomplete d subshell, or which can give rise to cations with an incomplete d subshell. They lie in groups 3 to 12, between the s- and p-blocks, and their properties are transitional between the reactive s-block metals and the largely non-metallic p-block.
- 3d series (period 4): Sc to Zn, 10 elements.
- 4d series (period 5): Y to Cd, 10 elements.
- 5d series (period 6): La, then Hf to Hg.
- 6d series (period 7): Ac, then Rf to Cn; all radioactive and, except actinium, made artificially with short half-lives.
Zn, Cd and Hg (group 12) have completely filled d subshells (d¹⁰) both as atoms and in their usual ions, so strictly they do not fit the definition. They are studied with the transition elements because their properties continue the trends of the series.
Electronic configuration
By the Aufbau principle 4s fills before 3d, so the 3d series starts at Sc, [Ar]₃d¹ 4s², and ends at Zn, [Ar]₃d¹⁰ 4s². Two exceptions occur because a half-filled or completely filled d subshell is extra stable (symmetrical distribution of electrons and greater exchange energy): Cr is [Ar]₃d⁵ 4s¹ and Cu is [Ar]₃d¹⁰ 4s¹. The general configuration is [noble gas] (n−1)d¹⁻¹⁰ ns¹⁻²; for periods 6 and 7 (after La and Ac) it includes the (n−2)f¹⁴ subshell as well.
| Element | Sc | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| Z | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 3d | 1 | 2 | 3 | 5 | 5 | 6 | 7 | 8 | 10 | 10 |
| 4s | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 1 | 2 |
Worked example 1: configurations of ions
Write the configurations of Fe²⁺, Fe³⁺ and Cu⁺. Rule: when a transition atom forms a cation, the 4s electrons are lost first. Working: Fe is [Ar]₃d⁶ 4s². Fe²⁺ loses the two 4s electrons: [Ar]₃d⁶. Fe³⁺ loses one more, from 3d: [Ar]₃d⁵ (half-filled, extra stable). Cu is [Ar]₃d¹⁰ 4s¹; Cu⁺ loses the 4s electron: [Ar]₃d¹⁰.
Metallic behaviour and melting points
All transition elements are metals: good conductors of heat and electricity (silver has the highest electrical conductivity of all elements at room temperature), lustrous, and mostly hard, with hcp, ccp or bcc lattices typical of true metals. Across a series, melting point first rises as the number of unpaired d electrons available for metallic bonding increases, reaches a maximum near the middle (d⁵), then falls as d electrons pair up. In the 3d series it rises from Sc (1814 K) to V (2183 K), with Cr (2180 K) close behind; Mn (and Tc in the 4d series) is unusually low (values from the textbook).
Atomic and ionic size
Across the 3d series the radius falls from Sc to V, then stays almost constant up to Cu. Each new 3d electron only partly shields the extra nuclear charge, so the effective nuclear charge rises a little; but the growing number of 3d electrons also repels the outer 4s electrons. The two effects nearly cancel. At Zn the ten d electrons repel each other enough for the radius to rise slightly.
Down a group, 4d elements are larger than 3d, as expected. But 5d elements are almost the same size as the 4d elements above them, for example Zr and Hf. This is due to the lanthanoid contraction (lesson 5).
Two opposing effects in the 3d series
-
Pulls electrons in
- Nuclear charge rises by one each step
- 3d electrons shield it only partly
- Effective nuclear charge rises slightly
-
Pushes electrons out
- More 3d electrons
- They repel the 4s electrons
- Outer shell tends to expand
-
Net result
- Radius falls Sc to V
- Then nearly constant to Cu
- Slight rise at Zn
Ionisation enthalpy
Ionisation enthalpies of transition elements lie between those of the s- and p-block. They rise across a series with nuclear charge, but irregularly, because the added electron enters the inner (n−1)d subshell, which shields the outer ns electrons. Ionisation enthalpies help predict the thermodynamic stability of compounds: the less energy needed to form an ion, the more stable its compounds tend to be.
Worked example 2: Ni(II) or Pt(II); Ni(IV) or Pt(IV)?
Ionisation enthalpies (kJ mol⁻¹, textbook values): Ni 737, 1753, 3395, 5297; Pt 864, 1791, 2800, 4150. For M²⁺: Ni: 737 + 1753 = 2490; Pt: 864 + 1791 = 2655. Less energy forms Ni²⁺, so Ni(II) compounds are thermodynamically more stable than Pt(II) compounds. For M⁴⁺: Ni: 2490 + 3395 + 5297 = 11,182; Pt: 2655 + 2800 + 4150 = 9605. Now platinum needs less energy, so Pt(IV) compounds (such as [PtCl₆]²⁻) are more stable than Ni(IV) ones.
Transition atoms lose 4s electrons before 3d. Half-filled (d⁵) and full (d¹⁰) subshells are extra stable: Cr 3d⁵ 4s¹, Cu 3d¹⁰ 4s¹.
Key takeaways: transition elements have (or form ions with) incomplete d subshells and fill groups 3–12. Melting points peak mid-series; 3d radii are nearly constant; 4d and 5d radii are nearly equal (lanthanoid contraction). Sums of ionisation enthalpies predict which oxidation state is more stable.
Check your understanding
-
1. Sc (Z = 21) is a transition element but zinc (Z = 30) is not, strictly, because
- both Sc³⁺ and Zn²⁺ are colourless
- Sc has a partly filled 3d subshell but in Zn it is completely filled
- in zinc the last electron enters 4s
- neither shows variable oxidation states
Show answer
Answer: B. Sc is [Ar]₃d¹ 4s², an incomplete d subshell. Zn is [Ar]₃d¹⁰ 4s² and Zn²⁺ is 3d¹⁰, so neither the atom nor its ion has an incomplete d subshell.
-
2. Which element has a half-filled penultimate d subshell and a half-filled valence s subshell?
- Cr
- Mn
- Cu
- Fe
Show answer
Answer: A. Cr is [Ar]₃d⁵ 4s¹: 3d⁵ is half-filled and 4s¹ is half-filled. Mn is 3d⁵ 4s²; Cu is 3d¹⁰ 4s¹.
-
3. The electronic configuration of Co²⁺ is
- [Ar]₃d⁵ 4s²
- [Ar]₃d⁶ 4s¹
- [Ar]₃d⁷
- [Ar]₃d⁸
Show answer
Answer: C. Co is [Ar]₃d⁷ 4s². Forming Co²⁺ removes the two 4s electrons first, leaving [Ar]₃d⁷.
-
4. Why does the atomic radius stay nearly constant from Cr to Cu?
- The nuclear charge does not change.
- Electrons are added to the 4s subshell.
- The lanthanoid contraction acts in this series.
- The slight rise in effective nuclear charge is balanced by repulsion of 4s electrons by the added 3d electrons.
Show answer
Answer: D. The textbook explains the constancy as two opposing effects: imperfect shielding by 3d electrons raises Z_eff slightly, while the extra 3d electrons repel the 4s electrons. The lanthanoid contraction affects the 5d series, not the 3d.
-
5. Using IE₁ + IE₂ = 2490 kJ mol⁻¹ for Ni and 2655 kJ mol⁻¹ for Pt, which statement is correct?
- Pt(II) compounds are more stable than Ni(II) compounds.
- Ni(II) compounds are thermodynamically more stable than Pt(II) compounds.
- Both are equally stable.
- Neither can form a +2 ion.
Show answer
Answer: B. Less energy (2490 < 2655 kJ mol⁻¹) is needed to form Ni²⁺, so Ni(II) compounds are thermodynamically more stable. For the +4 state the order reverses (Ni 11,182 vs Pt 9605 kJ mol⁻¹).
Sign in to keep track of the lessons you finish.