- Practice
- About 20 min
- 5 practice questions
Collision theory, Arrhenius equation and factors affecting rate
Explain rates with collision theory (energy and orientation), use the Arrhenius equation to find activation energy and rate constants at different temperatures, and describe how nature, concentration, surface area, temperature and catalysts change rate.
If something looks wrong, please tell us.
By the end of this lesson you can
- State collision theory and calculate the fraction of effective collisions e^(−Ea/RT).
- Write the Arrhenius equation, plot ln k against 1/T and get Ea from the slope.
- Calculate Ea from k at two temperatures, and k at a new temperature.
- Explain the effects of nature and state of reactants, concentration, surface area, temperature and catalysts.
Collision theory
Collision theory was proposed by Max Trautz (1916) and William Lewis (1918), based on the kinetic theory of gases: reactions happen when reacting molecules collide. For A₂ + B₂ → 2AB, the collision rate is proportional to both concentrations: collision rate = Z[A₂][B₂]. But at room temperature and 1 atm a gas molecule collides about 10⁹ times a second; if every collision reacted, every gas reaction would be over in about 10⁻⁹ s. Most are far slower, so most collisions must be ineffective.
- Energy: colliding molecules must have at least a minimum energy, the activation energy Ea. The fraction of collisions with enough energy is f = e^(−Ea/RT).
- Orientation: even energetic collisions react only if the molecules meet in a suitable alignment to form the transition state. This is included through the steric factor p.
Rate = p × e^(−Ea/RT) × Z[A₂][B₂], so k = pZe^(−Ea/RT).
Worked example 1: how small is f?
For Ea = 50 kJ mol⁻¹ at 300 K: Ea/RT = 50000 ÷ (8.314 × 300) = 50000 ÷ 2494 = 20.05; f = e^(−20.05) = 2.0 × 10⁻⁹, about 2 in every billion collisions. At 310 K: Ea/RT = 50000 ÷ 2577 = 19.40; f = e^(−19.40) = 3.8 × 10⁻⁹. A 10 K rise roughly doubles the fraction of effective collisions, which is why a common rough rule says many reactions near room temperature double their rate for a 10 °C rise.
The Arrhenius equation
Svante Arrhenius (Nobel Prize in Chemistry, 1903) proposed that the rate constant depends on temperature as:
k = A e^(−Ea/RT); ln k = ln A − (Ea/R)(1/T); log(k₂/k₁) = [Ea/(2.303R)] × [(T₂ − T₁)/(T₁T₂)]
The frequency factor A is related to how often the molecules collide and changes little with temperature. A plot of ln k against 1/T is a straight line of slope −Ea/R (or log k against 1/T has slope −Ea/2.303R). If Ea = 0, k = A. Subtracting the equations for two temperatures gives the two-temperature form above.
Worked example 2: activation energy from two rate constants
A rate constant doubles from 300 K to 310 K. Working: log 2 = [Ea/(2.303 × 8.314)] × [(310 − 300)/(300 × 310)]. 0.3010 = [Ea/19.147] × [10/93000]. Ea = 0.3010 × 19.147 × 9300 = 5.36 × 10⁴ J mol⁻¹ = 53.6 kJ mol⁻¹.
Worked example 3: rate constant at a new temperature
Ea = 80 kJ mol⁻¹ and k = 2.0 × 10⁻⁴ s⁻¹ at 300 K. Find k at 320 K. Working: log(k₂/k₁) = [80000/19.147] × [20/(300 × 320)] = 4178 × 2.083 × 10⁻⁴ = 0.8705. k₂/k₁ = 10^0.8705 = 7.42. k₂ = 7.42 × 2.0 × 10⁻⁴ = 1.48 × 10⁻³ s⁻¹.
Worked example 4: from slope and frequency factor
(a) A plot of log k against 1/T has slope −5000 K. Ea = −slope × 2.303R = 5000 × 2.303 × 8.314 = 95.7 kJ mol⁻¹. (b) A first-order reaction has k = 2.0 × 10⁻³ s⁻¹ at 400 K and Ea = 60 kJ mol⁻¹. Ea/RT = 60000 ÷ (8.314 × 400) = 18.04; e^(−18.04) = 1.46 × 10⁻⁸. A = k ÷ e^(−Ea/RT) = 2.0 × 10⁻³ ÷ 1.46 × 10⁻⁸ = 1.37 × 10⁵ s⁻¹.
Factors that affect the rate
- Nature and state of reactants: different bonds must break, so rates differ. In titrations, KMnO₄ oxidises Fe²⁺ quickly at room temperature but oxalate only slowly, so the oxalate titration is done warm (about 60 °C). Gas-phase and solution reactions are usually faster than reactions between solids: lead nitrate and potassium iodide solutions give yellow PbI₂ at once, but the dry solids react only slowly.
- Concentration: more particles per litre means more collisions per second. In the reaction Na₂S₂O₃ + 2HCl → 2NaCl + S + SO₂ + H₂O (Na 2 = 2, S 2 = 1 + 1, O 3 = 2 + 1, H 2 = 2, Cl 2 = 2), stronger thiosulphate makes the sulphur cloud appear sooner; 1/time is a measure of rate.
- Surface area: for a solid, smaller particles expose more surface. Powdered CaCO₃ reacts faster with dilute HCl than the same mass of marble chips: CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂.
- Temperature: a higher temperature raises the fraction of molecules with energy ≥ Ea (worked example 1). Magnesium hardly reacts with cold water but reacts with hot water: Mg + 2H₂O → Mg(OH)₂ + H₂.
- Catalyst: a substance that changes the rate without being permanently changed. It provides a path of lower Ea, so more molecules can cross the barrier. It does not change ΔH of the reaction. Mn²⁺ speeds up the reaction 2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O (Mn 2 = 2; C 10 = 10; O 28 = 20 + 8; H 16 = 16; charge +4 = +4).
How a catalyst speeds up a reaction
- Catalyst offers a new path
- Activation energy is lowered
- More collisions have energy ≥ Ea
- Rate increases; catalyst is regenerated
Key takeaways: only collisions with energy ≥ Ea and proper orientation react: k = pZe^(−Ea/RT). Arrhenius: ln k against 1/T has slope −Ea/R; log(k₂/k₁) = Ea(T₂ − T₁)/(2.303RT₁T₂). Rate rises with concentration, surface area, temperature and a catalyst, which lowers Ea.
Check your understanding
-
1. A rate constant is 1.5 × 10⁻³ s⁻¹ at 300 K and 4.5 × 10⁻³ s⁻¹ at 320 K. What is Ea? (log 3 = 0.4771, R = 8.314 J K⁻¹ mol⁻¹)
- about 4.4 kJ mol⁻¹
- about 19.0 kJ mol⁻¹
- about 87.7 kJ mol⁻¹
- about 43.9 kJ mol⁻¹
Show answer
Answer: D. log(k₂/k₁) = log 3 = 0.4771. T₁T₂/(T₂ − T₁) = 300 × 320 ÷ 20 = 4800 K. Ea = 2.303 × 8.314 × 0.4771 × 4800 = 19.147 × 0.4771 × 4800 = 4.385 × 10⁴ J mol⁻¹ ≈ 43.9 kJ mol⁻¹.
-
2. A plot of ln k against 1/T for a reaction obeying the Arrhenius equation is
- a straight line with positive slope Ea/R
- a straight line with negative slope −Ea/R
- a curve rising steeply
- a horizontal line
Show answer
Answer: B. ln k = ln A − (Ea/R)(1/T) is y = c + mx with slope m = −Ea/R, which is negative because Ea is positive.
-
3. Which quantity is NOT changed by adding a catalyst?
- Activation energy
- Rate constant
- Reaction pathway
- ΔH of the reaction
Show answer
Answer: D. A catalyst provides a new path with lower activation energy, so k and the rate increase. The reactants and products are unchanged, so ΔH of the reaction stays the same.
-
4. According to k = Ae^(−Ea/RT), which statement is correct?
- As the temperature becomes very high, k approaches A
- Raising [reactant] increases the rate of a zero-order reaction
- A plot of ln k against T is a straight line
- Increasing Ea increases k at a fixed temperature
Show answer
Answer: A. As T becomes very large, Ea/RT → 0 and e^(−Ea/RT) → 1, so k → A. Zero-order rates do not depend on concentration, ln k is linear in 1/T (not T), and a larger Ea makes k smaller.
-
5. For a reaction, ΔH (forward) = −40 kJ mol⁻¹ and Ea (forward) = 60 kJ mol⁻¹. What is Ea for the backward reaction?
- 20 kJ mol⁻¹
- 60 kJ mol⁻¹
- −100 kJ mol⁻¹
- 100 kJ mol⁻¹
Show answer
Answer: D. Ea(forward) − Ea(backward) = ΔH. So Ea(backward) = Ea(forward) − ΔH = 60 − (−40) = 100 kJ mol⁻¹. For an exothermic reaction the backward barrier is higher.
Sign in to keep track of the lessons you finish.